Perovskite light-emitting/detecting bifunctional fibres for wearable LiFi communication.

Light fidelity (LiFi), which is emerging as a compelling technology paradigm shifting the common means of high-capacity wireless communication technologies, requires wearable and full-duplex compact design because of its great significance in smart wearables as well as the 'Internet of Things'. However, the construction of the key component of wearable full-duplex LiFi, light-emitting/detecting bifunctional fibres, is still challenging because of the conflicting process between carrier separation and recombination, as well as the highly dynamic film-forming process. Here, we demonstrate light-emitting/detecting bifunctional fibres enabled by perovskite QDs with hybrid components.

Novel Lewis Base Cyclam Self-Passivation of Perovskites without an Anti-Solvent Process for Efficient Light-Emitting Diodes.

Metal halide perovskites have been focused as a candidate applied as a promising luminescent material for next-generation high-quality lighting and high-definition display. However, as perovskite films formed, high density of defects would be produced in solution processing inevitably, leading to low exciton recombination efficiency in light-emitting diodes (LEDs). Herein, a facile and novel self-passivation strategy to inhibit defect formation in perovskite films for constructing high-performance LEDs is developed.

Organic-Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48.

Perovskite quantum dots (QDs) with high photoluminescence quantum yields (PLQYs) and narrow emission peak hold promise for next-generation flexible and high-definition displays. However, perovskite QD films often suffer from low PLQYs due to the dynamic characteristics between the QD's surface and organic ligands and inefficient electrical transportation resulting from long hydrocarbon organic ligands as highly insulating barrier, which impair the ensuing device performance. Here, a general organic-inorganic hybrid ligand (OIHL) strategy is reported on to passivate perovskite QDs for highly efficient electroluminescent devices.

Room-Temperature Triple-Ligand Surface Engineering Synergistically Boosts Ink Stability, Recombination Dynamics, and Charge Injection toward EQE-11.6% Perovskite QLEDs.

Developing low-cost and high-quality quantum dots (QDs) or nanocrystals (NCs) and their corresponding efficient light-emitting diodes (LEDs) is crucial for the next-generation ultra-high-definition flexible displays. Here, there is a report on a room-temperature triple-ligand surface engineering strategy to play the synergistic role of short ligands of tetraoctylammonium bromide (TOAB), didodecyldimethylammonium bromide (DDAB), and octanoic acid (OTAc) toward "ideal" perovskite QDs with a high photoluminescence quantum yield (PLQY) of >90%, unity radiative decay in its intrinsic channel, stable ink characteristics, and effective charge injection and transportation in QD films, resulting in the highly efficient QD-based LEDs (QLEDs). Furthermore, the QD films with less nonradiative recombination centers exhibit improved PL properties with a PLQY of 61% through dopant engineering in A-site.

Ce-Doping to Modulate Photoluminescence Kinetics for Efficient CsPbBr Nanocrystals Based Light-Emitting Diodes.

Inorganic perovskite CsPbBr nanocrystals (NCs) are emerging, highly attractive light emitters with high color purity and good thermal stability for light-emitting diodes (LEDs). Their high photo/electroluminescence efficiencies are very important for fabricating efficient LEDs. Here, we propose a novel strategy to enhance the photo/electroluminescence efficiency of CsPbBr NCs through doping of heterovalent Ce ions via a facile hot-injection method.

Double-Protected All-Inorganic Perovskite Nanocrystals by Crystalline Matrix and Silica for Triple-Modal Anti-Counterfeiting Codes.

Novel fluorescence with highly covert and reliable features is quite desirable to combat the sophisticated counterfeiters. Herein, we report a simultaneously triple-modal fluorescent characteristic of CsPbBr@CsPbBr/SiO by the excitation of thermal, ultraviolet (UV) and infrared (IR) light for the first time, which can be applied for the multiple modal anti-counterfeiting codes. The diphasic structure CsPbBr@CsPbBr nanocrystals (NCs) was synthesized via the typical reprecipitation method followed by uniformly encapsulation into silica microspheres.

An all-inkjet-printed flexible UV photodetector.

In this work, a novel concept of the all-inkjet-printed flexible photodetectors based on ZnO nanocrystals with high performance was proposed and demonstrated with emphasis on the influence of different post-treatments including UV light irradiation and high temperature annealing. The photodetectors based on UV-treated ZnO nanocrystal films exhibit a responsivity and an on/off ratio as high as 0.14 A W and >10, respectively, which are better than the thermally treated devices.

50-Fold EQE Improvement up to 6.27% of Solution-Processed All-Inorganic Perovskite CsPbBr QLEDs via Surface Ligand Density Control.

Solution-processed CsPbBr quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement (up to 6.27%) are achieved through balancing surface passivation and carrier injection via ligand density control (treating with hexane/ethyl acetate mixed solvent), which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.

Synthesis and Luminescence Properties of La2W2O9:Eu3+ Micron-Crystals.

La2W2O9:2%Eu3+ phosphors were synthesized by a typical hydrothermal procedure. The samples were characterized by X-ray diffraction and scanning electron microscope (SEM). X-ray diffraction analysis showed that a stock solution pH value equal to 9 is the ideal value, while the crystallization of the hydroxyl sodium yttrium tungstate crystal is improved by increasing the PH values of stock solution within limits.

Efficient upconversion luminescence from Ba5Gd8Zn4O21:Yb(3+), Er(3+) based on a demonstrated cross-relaxation process.

Under 971 nm excitation, bright green and red emissions from Yb(3+)/Er(3+) co-doped Ba5Gd8Zn4O21 phosphor can be observed, especially the intense red emission in highly doped samples. The experimental results indicate that Ba5Gd8Zn4O21:Yb(3+), Er(3+) emits stronger upconversion luminescence than NaYF4:Yb(3+), Er(3+) under a low excitation power, and a maximum upconversion power efficiency of 2.7% for Ba5Gd8Zn4O21:Yb(3+), Er(3+) was achieved.

UVC upconversion material under sunlight excitation: LiYF(4): Pr(3+).

UVC upconversion emission is observed in a LiYF:Pr microcrystal under sunlight excitation. The dependence of UVC UC emission intensity on the excitation density of a 488 nm laser and sunlight is investigated. The obtained data indicates that two-photon processes play an important role in UVC UC emission.