Multifunctional Natural and Synthetic Melanin for Bioelectronic Applications: A Review.

Emerging material interest in bioelectronic applications has highlighted natural melanin and its derivatives as promising alternatives to conventional synthetic conductors. These materials, traditionally noted for their adhesive, antioxidant, biocompatible, and biodegradable properties, have barely been used as conductors due to their extremely low electrical activities. However, recent studies have demonstrated good conductive properties in melanin materials that promote electronic-ionic hybrid charge transfer, attributed to the formation of an extended conjugated backbone.

Amplifying the dielectric constant of shellac by incorporating natural clays for organic field effect transistors (OFETs).

We demonstrate in this work the practical use of uniform mixtures of a bioresin shellac and four natural clays, i.e. montmorillonite, sepiolite, halloysite and vermiculate as dielectrics in organic field effect transistors (OFETs).

Multifunctional Poly(3,4-ethylenedioxythiophene)/Crystalline Nanofibrous Cellulose Composites for Eco-Friendly and Sustainable Electronics.

Nanocellulose constitutes promising resources for next-generation electronics, particularly when incorporated with conductive polymers due to their abundance, renewability, processability, biodegradability, flexibility, and mechanical performance. In this study, electrically conducting cellulose nanofibers were fabricated through in situ chemical polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of sulfuric acid-treated cellulose nanofibers (SACN). The utilization of highly crystalline SACN extracted from tunicate yielded synergistic effects in PEDOT polymerization for achieving a highly conductive and molecularly uniform coating.

One-step wet-spinning of conducting polymer and cellulose nanofiber composites for fiber-type organic electrochemical transistors.

Considering that textile-based sensors are suitable for monitoring/communicating human vital health information, organic electrochemical transistors (OECTs) are considered as an efficient device platform for augmenting the capabilities and effectiveness of smart textile applications in diverse areas. Herein, we investigated the fabrication process and properties of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)-TEMPO-oxidized cellulose nanofiber (CNF) composites as active channel materials for fiber-type OECTs. Utilizing highly crystalline, mechanically rigid, and chemically robust CNFs directly extracted from biomass-derived tunicate, we fabricated PEDOT:PSS-CNF composite fibers with varying CNF portions (0, 5, 10, 20, and 30 %) through a simple one-step wet-spinning process using sulfuric acid-based coagulation media.

Stimuli-responsive nanoparticle-nanofiber hybrids for drug delivery and photodynamic therapy.

Hybrid nanomaterials possess integrated multi-components to syncretize various properties and functions within a single entity. Owing to this synergistic effect, they promise efficient anti-cancer therapy. In line with this target, we produced stimuli-responsive nanoparticle-nanofiber hybrids (NNHs) via embedding photoresponsive natural melanin nanoparticles (MNPs) within a biocompatible polycaprolactone (PCL) nanofiber matrix.

Biodegradable bioelectronics for biomedical applications.

Biodegradable polymers have been widely used in tissue engineering with the potential to be replaced by regenerative tissue. While conventional bionic interfaces are designed to be implanted in living tissue and organs permanently, biocompatible and biodegradable electronic materials are now progressing a paradigm shift towards transient and regenerative bionic engineering. For example, biodegradable bioelectronics can monitor physiologies in a body, transiently rehabilitate disease symptoms, and seamlessly form regenerative interfaces from synthetic electronic devices to tissues by reducing inflammatory foreign-body responses.

Platelet-rich plasma loaded nerve guidance conduit as implantable biocompatible materials for recurrent laryngeal nerve regeneration.

Vocal cord paralysis caused by recurrent laryngeal nerve (RLN) injury during thyroidectomy results in hoarseness, aspiration, and dyspnea. We evaluated the usefulness of nerve guidance conduits (NGCs) constructed from an asymmetric polycaprolactone (PCL)/Pluronic F127 porous membrane and filled with platelet-rich plasma (PRP) for functional RLN regeneration. We evaluated the proliferation and migration of Schwann cells (SCs) after PRP treatment in vitro.

Precisely tuned photonic properties of crystalline nanocellulose biocomposite coatings by gradually tailored nanoarchitectures.

Inspired by nature, we fabricated optically tuned bio-organic films of cellulose nanofibers (CNFs) and chitosan by precisely structuring layer-by-layer (LBL) assembly techniques. Directly extracted from tunicate, highly crystalline CNFs were deposited into gradual nanoporous structures, which dictates wave-like behaviors of optical transmittance and cyclic patterns of structural coloration. The optical transmittance of a glass substrate increased from 91% to 98.

Diagnosis of pine wilt disease using remote wireless sensing.

Pine wilt disease caused by Bursaphelenchus xylophilus is a major tree disease that threatens pine forests worldwide. To diagnose this disease, we developed battery-powered remote sensing devices capable of long-range (LoRa) communication and installed them in pine trees (Pinus densiflora) in Gyeongju and Ulsan, South Korea. Upon analyzing the collected tree sensing signals, which represented stem resistance, we found that the mean absolute deviation (MAD) of the sensing signals was useful for distinguishing between uninfected and infected trees.

Biosignal Sensors and Deep Learning-Based Speech Recognition: A Review.

Voice is one of the essential mechanisms for communicating and expressing one's intentions as a human being. There are several causes of voice inability, including disease, accident, vocal abuse, medical surgery, ageing, and environmental pollution, and the risk of voice loss continues to increase. Novel approaches should have been developed for speech recognition and production because that would seriously undermine the quality of life and sometimes leads to isolation from society.

High crystallinity of tunicate cellulose nanofibers for high-performance engineering films.

Tunicate cellulose nanofibers (CNFs) have received widespread attention as renewable and eco-friendly engineering materials because of their high crystallinity and mechanical stiffness. Here, we report the effects of disintegration process conditions on structure-property relationships of tunicate CNFs. By varying the hydrolysis time, we could establish a correlation between crystallinity of the CNFs with linearity and stiffness, which produces different molecular ordering within their nanostructured films.

T-Positive Mn-Doped Multi-Stimuli Responsive poly(L-DOPA) Nanoparticles for Photothermal and Photodynamic Combination Cancer Therapy.

In this study, we designed near-infrared (NIR)-responsive Mn-doped melanin-like poly(L-DOPA) nanoparticles (MNPs), which act as multifunctional nano-platforms for cancer therapy. MNPs, exhibited favorable π-π stacking, drug loading, dual stimuli (NIR and glutathione) responsive drug release, photothermal and photodynamic therapeutic activities, and T-positive contrast for magnetic resonance imaging (MRI). First, MNPs were fabricated via KMnO oxidation, where the embedded Mn acted as a T-weighted contrast agent.

Electrically conducting polymers for bio-interfacing electronics: From neural and cardiac interfaces to bone and artificial tissue biomaterials.

Conductive polymers (CPs) are gaining considerable attention as materials for implantable bioelectronics due to their unique features such as electronic-ionic hybrid conductivity, mechanical softness, ease of chemical modification, as well as moderate biocompatibility. CPs have been utilized for a wide range of applications including neural engineering, regenerative medicine, multi-functional sensors and actuators. This review focuses on CP materials design for use in bio-interfacing electronics including composites, conductive hydrogels, and electrochemical deposition.

Ambulatory second look percutaneous nephrolithotripsy with maturated nephros-tomy tract.

Introduction And Objectives: Percutaneous nephrolithotomy (PCNL) is the standard technique for managing large renal calculi. Second-look PCNL is typically performed under intravenous (IV) sedation or spinal / general anesthesia when removing remnant stones. This requires additional pre-anesthesia assessment and close monitoring.

Effect of expanding nanocellulose sponge on nasal mucosal defects in an animal model.

Nanocellulose has emerged for a wide range of applications in biomedical engineering because of its water absorption capacity, appropriate elasticity. We investigated the hemostatic and regenerative abilities of an expanding polyvinyl alcohol (PVA)-nanocellulose sponge on nasal mucosal defects. A 3 mm-diameter nasal defect was made in experimental rabbits.

Shape-Programmed Fabrication and Actuation of Magnetically Active Micropost Arrays.

Micro- and nanotextured surfaces with reconfigurable textures can enable advancements in the control of wetting and heat transfer, directed assembly of complex materials, and reconfigurable optics, among many applications. However, reliable and programmable directional shape in large scale is significant for prescribed applications. Herein, we demonstrate the self-directed fabrication and actuation of large-area elastomer micropillar arrays, using magnetic fields to both program a shape-directed actuation response and rapidly and reversibly actuate the arrays.

Controlled release of doxorubicin from polyethylene glycol functionalized melanin nanoparticles for breast cancer therapy: Part I. Production and drug release performance of the melanin nanoparticles.

In this study, polyethylene glycol (PEG) conjugated melanin nanoparticles (MNPs) were prepared (PEG-MNPs). A model chemotherapy drug, doxorubicin (DOX), was loaded into the PEG-MNPs with varied concentrations (0.125, 0.

Impedimetric Biosensors for Detecting Vascular Endothelial Growth Factor (VEGF) Based on Poly(3,4-ethylene dioxythiophene) (PEDOT)/Gold Nanoparticle (Au NP) Composites.

In advanced forms of diabetic retinopathy, retinal vascular occlusive disease and exudative age-related macular degeneration, vision loss is associated with elevated levels or extravasation of vascular endothelial-derived growth factor (VEGF) into the retina, vitreous, and anterior chamber of the eye. We hypothesize that point-of-care biosensors, capable of rapidly and precisely measuring VEGF levels within the eye will assist clinicians in assessing disease severity, and in establishing individualized dosing intervals for intraocular anti-VEGF injection therapy. An impedance biosensor based on a poly(3,4-ethylenedioxythiophene) (PEDOT)/gold nanoparticle (Au NP) composite was developed for detecting VEGF.

Nanoarchitecturing of Natural Melanin Nanospheres by Layer-by-Layer Assembly: Macroscale Anti-inflammatory Conductive Coatings with Optoelectronic Tunability.

Natural melanins are biocompatible conductors with versatile functionalities. Here, we report fabrication of multifunctional poly(vinyl alcohol)/melanin nanocomposites by layer-by-layer (LBL) assembly using melanin nanoparticles (MNPs) directly extracted from sepia officinalis inks. The LBL assembly offers facile manipulation of nanotextures as well as nm-thickness control of the macroscale film by varying solvent qualities.

Synthesis and characterization of bicontinuous cubic poly(3,4-ethylene dioxythiophene) gyroid (PEDOT GYR) gels.

We describe the synthesis and characterization of bicontinuous cubic poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer gels prepared within lyotropic cubic poly(oxyethylene)10 nonylphenol ether (NP-10) templates with Ia3[combining macron]d (gyroid, GYR) symmetry. The chemical polymerization of EDOT monomer in the hydrophobic channels of the NP-10 GYR phase was initiated by AgNO3, a mild oxidant that is activated when exposed to ultraviolet (UV) radiation. The morphology and physical properties of the resulting PEDOT gels were examined as a function of temperature and frequency using optical and electron microscopy, small-angle X-ray scattering (SAXS), dynamic mechanical spectroscopy, and electrochemical impedance spectroscopy (EIS).

Decellular biological scaffold polymerized with PEDOT for improving peripheral nerve interface charge transfer.

Regenerative peripheral nerve interfaces (RPNIs) are for signal transfer between peripheral nerves inside the body to controllers for motorized prosthetics external to the body. Within the residual limb of an amputee, surgical construction of a RPNI connects a remaining peripheral nerve and spare muscle. Nerve signals become concentrated within the RPNI.

Optical heating and temperature determination of core-shell gold nanoparticles and single-walled carbon nanotube microparticles.

The real-time temperature measurement of nanostructured materials is particularly attractive in view of increasing needs of local temperature probing with high sensitivity and resolution in nanoelectronics, integrated photonics, and biomedicine. Light-induced heating and Raman scattering of single-walled carbon nanotubes with adsorbed gold nanoparticles decorating silica microparticles are reported, by both green and near IR lasers. The plasmonic shell is used as nanoheater, while the single-walled carbon nanotubes are Raman active and serve as a thermometer.

Effects of prostatic inflammation on LUTS and alpha blocker treatment outcomes.

Purpose: To evaluate the association between prostatic inflammation and lower urinary tract symptoms (LUTS), and to identify the effects of prostatic inflammation on the treatment with an alpha blocker.

Materials And Methods: 111 Participants who were aged ≥ 50 years, the presence of LUTS (maximal flow rate < 20 m/s, IPSS ≥ 11), and an elevated PSA level (3-20 ng/mL) were treated with tamsulosin 0.2mg once daily for 3 months after prostate biopsies.

Clinical efficacy of roxithromycin in men with chronic prostatitis/chronic pelvic pain syndrome in comparison with ciprofloxacin and aceclofenac: a prospective, randomized, multicenter pilot trial.

Roxithromycin is effective in the treatment of intracellular organisms, including chlamydia and mycoplasma, and exhibits anti-inflammatory and immunomodulatory effects on respiratory diseases. To explore the potential therapeutic benefit of roxithromycin in chronic prostatitis/chronic pelvic pain syndrome (CP/CPPS), this study compared the effect of roxithromycin with ciprofloxacin and aceclofenac. A total of 75 patients with CP/CPPS were randomized to three groups in open-label: group 1, ciprofloxacin; group 2, aceclofenac; and group 3, roxithromycin.

Biological and electrophysiologic effects of poly(3,4-ethylenedioxythiophene) on regenerating peripheral nerve fibers.

Background: Uninjured peripheral nerves in upper-limb amputees represent attractive sites for connectivity with neuroprostheses because their predictable internal topography allows for precise sorting of motor and sensory signals. The inclusion of poly(3,4-ethylenedioxythiophene) reduces impedance and improves charge transfer at the biotic-abiotic interface. This study evaluates the in vivo performance of poly(3,4-ethylenedioxythiophene)-coated interpositional decellularized nerve grafts across a critical nerve conduction gap, and examines the long-term effects of two different poly(3,4-ethylenedioxythiophene) formulations on regenerating peripheral nerve fibers.