In vivo Evaluation of Cenderitide-Eluting Stent (CES) II.

The use of drug-eluting coronary stents has led to significant reduction in in-stent restenosis (ISR), but led to delayed endothelialization, necessitating the prolonged use of expensive anti-thrombotic drugs with their side-effects. Cenderitide (CD-NP) is a novel anti-proliferative chimeric peptide of semi-endothelial origin. Our previous work in vitro has demonstrated; that the smooth muscle cells were inhibited significantly more than endothelial cells which is the desirable feature of an anti-restenosis drug.

Role of epithelial-mesenchymal transition markers in triple-negative breast cancer.

Triple-negative breast cancers (TNBCs) are a heterogeneous group of breast tumours that are often associated with adverse pathological characteristics, poorer clinical outcomes and lack of targeted therapeutic options. Epithelial-mesenchymal transition, which plays a crucial role in tumour development and progression, is characterised by a transition from epithelial to mesenchymal phenotype and loss of proteins involved in maintaining cell junctions. We aimed to correlate protein expression of E-cadherin, Snail2 and transforming growth factor beta (TGF-β) with clinicopathological parameters and survivals of a series of patients with TNBC.

Pushing the envelope in tissue engineering: ex vivo production of thick vascularized cardiac extracellular matrix constructs.

Functional vascularization is a prerequisite for cardiac tissue engineering of constructs with physiological thicknesses. We previously reported the successful preservation of main vascular conduits in isolated thick acellular porcine cardiac ventricular ECM (pcECM). We now unveil this scaffold's potential in supporting human cardiomyocytes and promoting new blood vessel development ex vivo, providing long-term cell support in the construct bulk.

n-Type carbon nanotubes/silver telluride nanohybrid buckypaper with a high-thermoelectric figure of merit.

n-Type thermoelectric (TE) materials was made from carbon nanotube (CNT) buckypapers. We used silver telluride (Ag2Te) to achieve electron injection to the CNTs. The TE characterizations on more than 50 samples show that the CNTs/Ag2Te hybrids exhibit negative Seebeck coefficients (e.

A carbon monoxide gas sensor using oxygen plasma modified carbon nanotubes.

Carbon monoxide (CO) is a highly toxic gas that can be commonly found in many places. However, it is not easily detected by human olfaction due to its colorless and odorless nature. Therefore, highly sensitive sensors need to be developed for this purpose.

Development of nanomaterials for SALDI-MS analysis in forensics.

Within the last decade, the escalation of research output in the field of nanotechnology has spurred the development of new nanomaterials for use as assisting agents in surface assisted laser desorption ionization mass spectrometry (SALDI-MS). Specifically modified nanomaterials, coupled with mass spectrometry, have improved the detection sensitivity, specificity, flexibility and reproducibility of SALDI-MS analysis. The technological advancement of LDI-MS has in turn, propelled the use of the analytical technique in the field of forensics.

Effect of gas pressure on electron field emission from carbon nanotube forests.

This article quantifies the effect of the operating pressure of the H2 + C2H4 gas mixture on the current density and threshold voltage of the electron emission from dense forests of multiwalled carbon nanotubes synthesized using thermal catalytic Chemical Vapor Deposition under near atmospheric pressure process conditions. The results suggest that in the pressure range of interest 400-700 Torr the field emission properties can be substantially improved by operating the process at lower gas pressures when the nanostructure aspect ratios are higher. The obtained threshold voltage approximately 1.

Multiscale topological guidance for cell alignment via direct laser writing on biodegradable polymer.

Direct laser writing on biodegradable polymer to create microchannels for aligning cells is presented here. This technique offers the advantages of ease-of-manufacturing, ease-of-design, high-speed single-step fabrication, and noncontacting to the material. In this work, microchannels of 100 microm width, 100 microm depth, and 50 microm intervals were created on a biodegradable polymer film directly using a Ti-sapphire femtosecond pulsed laser.

Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering.

An advanced manufacturing technique, selective laser sintering (SLS), was utilized to fabricate a porous polycaprolactone (PCL) scaffold designed with an automated algorithm in a parametric library system named the "computer-aided system for tissue scaffolds" (CASTS). Tensile stiffness of the sintered PCL strut was in the range of 0.43+/-0.

Electrospinning of polyvinylidene difluoride with carbon nanotubes: synergistic effects of extensional force and interfacial interaction on crystalline structures.

Polyvinylidene difluoride (PVDF) solutions containing a very low concentration of single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) of similar surface chemistry, respectively, were electrospun, and the nanofibers formed were collected using a modified rotating disk collector. The polymorphic behavior and crystal orientation of the nanofibers were studied using wide-angle X-ray diffraction and infrared spectroscopy, while the nanotube alignment and interfacial interactions in the nanofibers were probed by transmission electron microscopy and Raman spectroscopy. It is shown that the interfacial interaction between the SWCNTs and PVDF and the extensional force experienced by the nanofibers in the electrospinning and collection processes can work synergistically to induce highly oriented beta-form crystallites extensively.

Hydrolytic degradation of electron beam irradiated high molecular weight and non-irradiated moderate molecular weight PLLA.

The purpose of this study is to examine the hydrolytic degradation of electron beam irradiated ring-opening polymerized (ROP) poly(l-lactide) (PLLA-ir) and non-irradiated melt polycondensation polymerized poly(l-lactic acid) (PLLA-pc). It was observed that irradiation increases the hydrolytic degradation rate constant for ROP PLLA. This was due to a more hydrophilic PLLA-ir, as a result of irradiation.

Biodegradable stents with elastic memory.

This work reports, for the first time, the development of a fully biodegradable polymeric stent that can self-expand at body temperatures (approximately 37 degrees C), using the concept of elastic memory. This self-expansion is necessary in fully polymeric stents, to overcome the problem of elastic recoil following balloon expansion in a body vessel. Bi-layered biodegradable stent prototypes were produced from poly-L-lactic acid (PLLA) and poly glycolic acid (PLGA) polymers.

Influence of electron-beam radiation on the hydrolytic degradation behaviour of poly(lactide-co-glycolide) (PLGA).

The purpose of this study is to examine the effect of electron-beam (e-beam) radiation on the hydrolytic degradation of poly(lactide-co-glycolide) (PLGA) films. PLGA films were irradiated and observed to undergo radiation-induced degradation through chain scission, as observed from a drop in its average molecular weight with radiation dose. Irradiated (5, 10 and 20 Mrad) and non-irradiated (0 Mrad) samples of PLGA were subsequently hydrolytically degraded in phosphate-buffered saline solution at 37.

Effect of isothermal annealing on the hydrolytic degradation rate of poly(lactide-co-glycolide) (PLGA).

Isothermal crystallization through annealing at 115 degrees C was conducted to increase the degree of crystallinity of poly (lactide-co-glycolide) (PLGA). The maximum increase in the degree of crystallinity (approximately 21%) was achieved after 60 min of annealing. The crystal size/perfection was observed to increase with annealing time.

Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering.

Hydroxyapatite (HA) ceramics have been conventionally strengthened and toughened in the form of composites and coatings. New microstructural designs and processing methodologies are still needed for the improvement of the mechanical properties of HA-based ceramics. This study was to prepare laminated and functionally graded HA/yttria stabilized tetragonal zirconia (Y-TZP) composites by the relatively new process of spark plasma sintering (SPS).