Hemostatic Effect and Mechanism of Epidermal Growth Factor-Hemostatic Powder after Endoscopic Submucosal Dissection in a Porcine Model.

Background/aims: Among several methods used to prevent endoscopic submucosal dissection (ESD) bleeding, the recently developed hemostatic powder (HP) has few technical limitations and is relatively easy-to-use. This study aimed to analyze the hemostatic effects and mechanisms of two HPs using a porcine upper gastrointestinal hemorrhage model.

Methods: We evaluated HPs (Endospray and epidermal growth factor [EGF]-endospray) for adhesion, waterproofing ability, permeability, and absorption .

Recirculating peritoneal dialysis system using urease-fixed silk fibroin membrane filter with spherical carbonaceous adsorbent.

The chronic kidney disease (CKD) patients are undergoing continuous ambulatory peritoneal dialysis (CAPD). However, there are some constraints, the frequent exchange of the dialysate and limitation of outside activity, associated with CAPD remain to be solved. In this study, we designed the wearable artificial kidney (WAK) system for peritoneal dialysis (PD) using urease-immobilized silk fibroin (SF) membrane and polymer-based spherical carbonaceous adsorbent (PSCA).

Fabrication of a Urea Biosensor for Real-Time Dynamic Fluid Measurement.

In this study, a portable urea sensor that monitors the urea concentration in flow conditions was fabricated. We propose an electrochemical sensor that continually measures the urea concentration of samples flowing through it at a constant flow rate in real time. For the electrochemical sensing, a porous silk fibroin membrane with immobilized urease was mounted in a polydimethylsiloxane (PDMS) sensor housing.

Application of a Collagen Patch Derived from Duck Feet in Acute Tympanic Membrane Perforation.

We investigated the utility of the duck-feet collagen extraction patching procedure in the traumatic tympanic membrane (TM) perforation via a comparison with spontaneous healing or paper patch. Fifty-six ears of adult male Sprague-Dawley rats, each weighing in the range of 250 to 300 g, were used for the animal studies. Sixteen rats had one-side ear in the control group and the opposite-side ear in the treated groups.

Three dimensional poly(ε-caprolactone) and silk fibroin nanocomposite fibrous matrix for artificial dermis.

Ideal dermal substitutes should have comparable physicochemical and biological properties to the natural skin tissue. In this study, we report a novel strategy to "engineer" controlled 3D nanocomposite fibrous matrix of poly(ε-caprolactone) (PCL) and silk fibroin (SF) for an artificial dermis application. Using a custom-designed cold-plate electrospinning and automatic magnet agitation system, up to 6mm of the thickness was achieved resulting from the accumulation of ice crystal layers on the PCL nanofibers surface-modified with the SF particles.

Three-dimensional electrospun silk-fibroin nanofiber for skin tissue engineering.

Tissue-engineered skin substitutes may offer an effective therapeutic option for the treatment of patients with skin damages. In this study, a novel three-dimensional (3D) scaffold composed of electrospun silk fibroin (SF) nanofiber was fabricated using electrospinning with the addition of NaCl crystals. It has well known that the electrospun SF nanofibers were excellent scaffold for tissue.

Novel fabrication method of the peritoneal dialysis filter using silk fibroin with urease fixation system.

During the last decade, there has been a great advance in the kidney dialysis system by wearable artificial kidney (WAK) system for end-stage renal disease patients. Uremic solute removal and water regeneration system are the most prerequisite for WAK to work properly. In this study, we designed a filtering membrane system by using immobilized urease silk fibroin filter and evaluated its comparative effectiveness with a PVDF filtering system in peritoneal dialysate regeneration system by urea removal efficacy.

A prospective cohort study of the silk fibroin patch in chronic tympanic membrane perforation.

Objectives/hypothesis: Silk fibroin patching has been used to repair acute tympanic membrane perforations. Here, we describe the advantages and outcomes of this technique for chronic tympanic membrane perforations.

Study Design: Individual cohort study.

Fabrication and characterization of hydrocolloid dressing with silk fibroin nanoparticles for wound healing.

Hydrocolloid dressings have been developed for many types of wound healing. In particular, dressing is a critical component in the successful recover of burn injuries, which causes a great number of people to not only suffer from physical but also psychological and economic anguish each year. Additionally, silk fibroin is the safest material for tissue engineering due to biocompatibility.

Fabrication of 3D porous SF/β-TCP hybrid scaffolds for bone tissue reconstruction.

Bio-ceramic is a biomaterial actively studied in the field of bone tissue engineering. But, only certain ceramic materials can resolve the corrosion problem and possess the biological affinity of conventional metal biomaterials. Therefore, the recent development of composites of hybrid composites and polymers has been widely studied.

Fabrication of duck's feet collagen-silk hybrid biomaterial for tissue engineering.

Collagen constituting the extracellular matrix has been widely used as biocompatible material for human use. In this study, we have selected duck's feet for extracting collagen. A simple method not utilizing harsh chemical had been employed to extract collagen from duck's feet.

Wound healing effect of electrospun silk fibroin nanomatrix in burn-model.

Silk fibroin has recently become an important biomaterial for tissue engineering application. In this study, silk fibroin nanomatrix was fabricated by electrospinning and evaluated as wound dressing material in a burn rat model. The wound size reduction, histological examination, and the quantification of transforming growth factor TGF-β1 and interleukin IL-1α, 6, and 10 were measured to evaluate the healing effects.

Osteoinductive silk fibroin/titanium dioxide/hydroxyapatite hybrid scaffold for bone tissue engineering.

The present study demonstrated the fabrication that incorporation of titanium isopropoxide (TiO2) and hydroxyapatite (HA) nanoparticles into the silk fibroin (SF) scaffolds. In this process, we prepared TiO2 nanoparticles using sol-gel synthesis and the porous structure was developed by salt-leaching process. Homogeneous distribution of TiO2 and HA nanoparticles were confirmed by images of VP-FE-SEM and those equipped with energy dispersive X-ray spectrometer.

Fabrication of silk fibroin film using centrifugal casting technique for corneal tissue engineering.

Films prepared from silk fibroin have shown potential as biomaterials in tissue engineering applications for the eye. Here, we present a novel process for fabrication of silk fibroin films for corneal application. In this work, fabrication of silk fibroin films was simply achieved by centrifugal force.

Fabrication of 3D porous silk scaffolds by particulate (salt/sucrose) leaching for bone tissue reconstruction.

Silk fibroin is a biomaterial being actively studied in the field of bone tissue engineering. In this study, we aimed to select the best strategy for bone reconstruction on scaffolds by changing various conditions. We compared the characteristics of each scaffold via structural analysis using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), the swelling ratio, water uptake, porosity, compressive strength, cell infiltration and cell viability (CCK-8).

Hybrid scaffolds based on PLGA and silk for bone tissue engineering.

Porous silk scaffolds, which are considered to be natural polymers, cannot be used alone because they have a long degradation rate, which makes it difficult for them to be replaced by the surrounding tissue. Scaffolds composed of synthetic polymers, such as PLGA, have a short degradation rate, lack hydrophilicity and their release of toxic by-products makes them difficult to use. The present investigations aimed to study hybrid scaffolds fabricated from PLGA, silk and hydroxyapatite nanoparticles (Hap NPs) for optimized bone tissue engineering.

3D electrospun silk fibroin nanofibers for fabrication of artificial skin.

Tissue-engineered skin substitutes such as nanofibers from traditional electrospinning may offer an effective therapeutic option for the treatment of patients suffering from skin damages such as burns and diabetic ulcers. However, it is generally difficult for cells to infiltrate the nanofibers due to their small pore size and sheets-like appearance. In the present study, a facile and efficient strategy has successfully been introduced that can produce 3D silk fibroin nanofibers, obviating an intrinsic limitation of traditional and salt-leaching electrospinning by introducing cold-plate electrospinning.

Development of artificial dermis using 3D electrospun silk fibroin nanofiber matrix.

Several auto- or alloplastic dermal substitutes have been used for full thickness skin defects. However, there is no ideal dermal substitute that is biocompatible and offers adequate mechanical properties and sufficient thickness and volume. Silk fibroin can be considered a possible alternative material for the construction of dermal substitutes.

3D silk fibroin scaffold incorporating titanium dioxide (TiO2) nanoparticle (NPs) for tissue engineering.

The present study deals with fabrication of scaffolds composing of silk fibroin and TiO2 NPs fabricated using a salt-leaching process. At first instance, the TiO2 NPs were prepared by using sol-gel synthesis, affording to have average diameter of 77±21μm. Furthermore, the aqueous solutions of silk fibroin were mixed with 0.

Facile and highly efficient approach for the fabrication of multifunctional silk nanofibers containing hydroxyapatite and silver nanoparticles.

In this study, a good combination consisting of electrospun silk fibroin nanofibers incorporated with high-purity hydroxyapatite (HAp) nanoparticles (NPs) and silver NPs is introduced as antimicrobial for tissue engineering applications. The variable pressure field emission scanning electron microscope results confirmed randomly placed nanofibers are produced with highly dispersed HAp and silver NPs in nanofibers after electrospinning. The X-ray diffraction results demonstrated crystalline features of each of the three components used for electrospinning.

Fabrication of poly(lactic-co-glycolic acid) scaffolds containing silk fibroin scaffolds for tissue engineering applications.

The present study deals with the fabrication of poly(lactic-co-glycolic acid) (PLGA) scaffolds modified with silk fibroin for biomedical application. The PLGA solutions were added with salt particles and pressed with high pressures; which were further subjected to salt leaching resulting in the creation of large sized pores in the PLGA scaffolds. To fill up these pores, 2%, 4%, and 8% of silk solutions were added, however, the addition created extra small sized pores.

A novel approach to fabricate silk nanofibers containing hydroxyapatite nanoparticles using a three-way stopcock connector.

Electrospinning technique is commonly used to produce micro- and/or nanofibers, which utilizes electrical forces to produce polymeric fibers with diameters ranging from several micrometers down to few nanometers. Desirably, electrospun materials provide highly porous structure and appropriate pore size for initial cell attachment and proliferation and thereby enable the exchange of nutrients. Composite nanofibers consisting of silk and hydroxyapatite nanoparticles (HAp) (NPs) had been considered as an excellent choice due to their efficient biocompatibility and bone-mimicking properties.

Antimicrobial resistance of Escherichia coli O157 from cattle in Korea.

Of 45 Escherichia coli O157 isolates from cattle feces, which were collected between May 2000 and September 2003 in Korea, 32 were resistant to at least 1 antibiotic and 28 were resistant to 4 or more antibiotics, with 32, 30 and 30 of the isolates being resistant to streptomycin, tetracycline and sulfisoxazole, respectively. Two isolates were resistant to fluoroquinolones and to 10 or more of the 22 other antimicrobial agents that were tested. Thirteen antimicrobial resistant patterns were observed.