Pulse-Echo Ultrasound for Quantitative Measurements of Two Uncorrelated Elastic Parameters.

Objective: This paper describes the relationship between elastic tissue properties and strain and presents an initial investigation of pulse-echo ultrasound to measure two uncorrelated elastic parameters in tissue-mimicking phantoms. The two elastic parameters are the shear modulus, related to deformation of shape, and what we in the paper define as the nonlinear compressibility, related to deformation of volume.

Methods: We prepared tissue-mimicking phantoms containing lesions of variable shear modulus and variable nonlinear compressibility.

Unraveling Ice-Solid Interface Rupture Dynamics: Insights from Molecular Dynamics Simulations.

Unwanted icing on exposed surfaces poses significant risks, driving the quest for effective anti-icing mechanisms. While fracture mechanics concepts have been developed for designing coatings that weaken the ice-solid interface on soft surfaces, the factors that dictate ice adhesion strength and its counterpart, ice removal force, on hard surfaces remain poorly understood. In this study, we employ molecular dynamics simulations to investigate the interface rupture between ice and a hard solid substrate.

Second harmonic generation microscopy, biaxial mechanical tests and fiber dispersion models in human skin biomechanics.

Advanced numerical simulations of the mechanical behavior of human skin require thorough calibration of the material's constitutive models based on experimental ex vivo mechanical tests along with images of tissue microstructure for a variety of biomedical applications. In this work, a total of 14 human healthy skin samples and 4 additional scarred skin samples were experimentally analyzed to gain deep insights into the biomechanics of human skin. In particular, second harmonic generation (SHG) microscopy was used to extract detailed images of the distribution of collagen fibers, which were subsequently processed using a three-dimensional Fourier transform-based method recently proposed by the authors to quantify the distribution of fiber orientations.

Quantified planar collagen distribution in healthy and degenerative mitral valve: biomechanical and clinical implications.

Degenerative mitral valve disease is a common valvular disease with two arguably distinct phenotypes: fibroelastic deficiency and Barlow's disease. These phenotypes significantly alter the microstructures of the leaflets, particularly the collagen fibers, which are the main mechanical load carriers. The predominant method of investigation is histological sections.

An Experiential Learning Opportunity in Norway: Computation for Bioengineering and Mechanical Engineering Students.

The global learning initiative at Northeastern University is focused on fostering intercultural communication skills. The Dialogue of Civilization (DOC) program serves as a mechanism to achieve such a goal by offering faculty-led international experiences. In this paper, we have presented a detailed account of a DOC program that took place in Norway.

Fourier transform-based method for quantifying the three-dimensional orientation distribution of fibrous units.

Several materials and tissues are characterized by a microstructure composed of fibrous units embedded in a ground matrix. In this paper, a novel three-dimensional (3D) Fourier transform-based method for quantifying the distribution of fiber orientations is presented. The method allows for an accurate identification of individual fiber families, their in-plane and out-of-plane dispersion, and showed fast computation times.

Macro-indentation testing of soft biological materials and assessment of hyper-elastic material models from inverse finite element analysis.

Mechanical characterization of hydrogels and ultra-soft tissues is a challenging task both from an experimental and material parameter estimation perspective because they are much softer than many biological materials, ceramics, or polymers. The elastic modulus of such materials is within the 1 - 100 kPa range, behaving as a hyperelastic solid with strain hardening capability at large strains. In the current study, indentation experiments have been performed on agarose hydrogels, bovine liver, and bovine lymph node specimens.

Potential of computational models in personalized treatment of obstructive sleep apnea: a patient-specific partial 3D finite element study.

The upper airway experiences mechanical loads during breathing. Obstructive sleep apnea is a very common sleep disorder, in which the normal function of the airway is compromised, enabling its collapse. Its treatment remains unsatisfactory with variable efficacy in the case of many surgeries.

In silico analysis provides insights for patient-specific annuloplasty in Barlow's disease.

Objective: To predict the required mitral annular area reduction in patients with Barlow's disease to obtain a predefined leaflet area index by a novel in silico modeling method.

Methods: Three-dimensional echocardiography was used to create patient-specific mitral valve models of 8 patients diagnosed with Barlow's disease and bileaflet prolapse preoperatively. Six patients were also studied postoperatively in a finite element framework, to quantify the optimal coaptation area index.

Mechanical behavior and collagen structure of degenerative mitral valve leaflets and a finite element model of primary mitral regurgitation.

Degenerative mitral valve disease is the main cause of primary mitral regurgitation with two phenotypes: fibroelastic deficiency (FED) often with localized myxomatous degeneration and diffuse myxomatous degeneration or Barlow's disease. Myxomatous degeneration disrupts the microstructure of the mitral valve leaflets, particularly the collagen fibers, which affects the mechanical behavior of the leaflets. The present study uses biaxial mechanical tests and second harmonic generation microscopy to examine the mechanical behavior of Barlow and FED tissue.

Recombinant irisin enhances the extracellular matrix formation, remodeling potential, and differentiation of human periodontal ligament cells cultured in 3D.

Background: Irisin is expressed in human periodontal ligament (hPDL), and its administration enhances growth, migration and matrix deposition in hPDL cells cultured in monolayers in vitro.

Objectives: To identify whether irisin affects the gene expression patterns directing the morphology, mechanical properties, extracellular matrix (ECM) formation, osteogenic activity and angiogenic potential in hPDL cell spheroids cultured in 3D.

Materials And Methods: Spheroids of primary human hPDL cells were generated in a rotational 3D culture system and treated with or without irisin.

Finite element analysis of mitral valve annuloplasty in Barlow's disease.

Barlow's Disease affects the entire mitral valve apparatus causing mitral regurgitation. Standard annuloplasty procedures lead to an average of 55% annular area reduction of the end diastolic pre-operative annular area in Barlow's diseased valves. Following annular reduction, mitral valvuloplasty may be needed, usually with special focus on the posterior leaflet.

Microstructure and mechanics of the bovine trachea: Layer specific investigations through SHG imaging and biaxial testing.

The trachea is a complex tissue made up of hyaline cartilage, fibrous tissue, and muscle fibers. Currently, the knowledge of microscopic structural organization of these components and their role in determining the tissue's mechanical response is very limited. The purpose of this study is to provide data on the microstructure of the tracheal components and its influence on tissue's mechanical response.

Assembly of Graphene Platelets for Bioinspired, Stimuli-Responsive, Low Ice Adhesion Surfaces.

Design and fabrication of functional materials for anti-icing and deicing attract great attention from both the academic research and industry. Among them, the study of fish-scale-like materials has proved that enabling sequential rupture is an effective approach for weakening the intrinsic interface adhesion. Here, graphene platelets were utilized to construct fish-scale-like surfaces for easy ice detachment.

Biomechanics of mitral valve leaflets: Second harmonic generation microscopy, biaxial mechanical tests and tissue modeling.

Collagen fibers are the main load carrier in the mitral valve (MV) leaflets. Their orientation and dispersion are an important factor for the mechanical behavior. Most recent studies of collagen fibers in MVs lack either entire thickness study or high transmural resolution.

Vitamin K2 Modulates Vitamin D-Induced Mechanical Properties of Human 3D Bone Spheroids In Vitro.

Rotational culture promotes primary human osteoblasts (hOBs) to form three-dimensional (3D) multicellular spheroids with bone tissue-like structure without any scaffolding material. Cell-based bone models enable us to investigate the effect of different agents on the mechanical strength of bone. Given that low dietary intake of both vitamin D and K is negatively associated with fracture risk, we aimed to assess the effect of these vitamins in this system.

Donnan Contribution and Specific Ion Effects in Swelling of Cationic Hydrogels are Additive: Combined High-Resolution Experiments and Finite Element Modeling.

Finite element modeling applied to analyze experimentally determined hydrogel swelling data provides quantitative description of the hydrogel in the aqueous solutions with well-defined ionic content and environmental parameters. In the present study, we expand this strategy to analysis of swelling of hydrogels over an extended concentration of salt where the Donnan contribution and specific ion effects are dominating at different regimes. Dynamics and equilibrium swelling were determined for acrylamide and cationic acrylamide-based hydrogels by high-resolution interferometry technique for step-wise increase in NaCl and NaBr concentration up to 2 M.

Data on residual stresses of mooring chains measured by neutron diffraction and hole drilling techniques.

Residual stresses in large offshore mooring chains have been measured for the first time and presented in this article. Two chain links with the same size and material, one only subjected to proof load and no cyclic service loads and the other exposed to service loads as well as the proof load, were selected for the experiment. Residual stresses just below the surface were measured using the hole-drilling technique and the neutron diffraction technique was employed for deeper measurements.

Enabling sequential rupture for lowering atomistic ice adhesion.

State-of-the-art passive icephobicity relies mainly on static parameters such as surface energy, coating elastic modulus, crack sizes and so on. Low ice adhesion resulting from the dynamic de-icing process, for instance ice detaching modes from substrates, has not yet been explored. In the current study, atomistic modeling and molecular dynamics simulations were employed to identify ice rupture modes as crucial dynamic factors for surface icephobicity.

Soft palate muscle activation: a modeling approach for improved understanding of obstructive sleep apnea.

A Hill model-based phenomenological method for muscle activation was used to investigate defectiveness of the palatal muscle tone during sleep for obstructive sleep apnea (OSA) patients. Based on the stretch-stress characteristic of muscle activation when the eccentric contraction is considered, a specifically defined phenomenological strain-energy function was used, as well as the Holzapfel-type strain-energy function for the passive part. A continuum mechanical framework, including the stress tensor and elasticity tensor, was obtained, based on the defined strain-energy function.

3D patient-specific numerical modeling of the soft palate considering adhesion from the tongue.

Collapse of the soft palate in the upper airway contributes to obstructive sleeping apnea (OSA). In this study, we investigate the influence of the adhesion from the tongue on the soft palate global response. This is achieved using a cohesive zone finite element approach.

Adiponectin Reduces Bone Stiffness: Verified in a Three-Dimensional Artificial Human Bone Model .

Primary human osteoblasts and osteoclasts incubated in a rotating coculture system without any scaffolding material, form bone-like tissue that may be used to evaluate effects of various compounds on mechanical strength. Circulating adiponectin has been found to be negatively associated with BMD and strength and was therefore assessed in this system. Osteospheres of human osteoblasts and osteoclasts were generated with and without adiponectin.

Palatal implant surgery effectiveness in treatment of obstructive sleep apnea: A numerical method with 3D patient-specific geometries.

Obstructive sleep apnea (OSA) affects a large percentage of the population and is increasingly recognized as a major global health problem. One surgical procedure for OSA is to implant polyethylene (PET) material into the soft palate, but its efficacy remains to be discussed. In this study, we provide input to this topic based on numerical simulations.

MicroCT-based finite element models as a tool for virtual testing of cortical bone.

The aim of this study was to assess a virtual biomechanics testing approach purely based on microcomputed tomography (microCT or µCT) data, providing non-invasive methods for determining the stiffness and strength of cortical bone. Mouse femurs were µCT scanned prior to three-point-bend tests. Then microCT-based finite element models were generated with spatial variation in bone elastoplastic properties and subject-specific femur geometries.