Sulfonated and gamma-irradiated waste expanded polystyrene with iron oxide nanoparticles, for removal of indigo carmine dye in textile wastewater.

In this work, waste expanded polystyrene (WEPS) was irradiated with gamma rays, ranging doses from 100 kGy to 1,000 kGy. After irradiation, the WEPS had decrease on its glass transition temperature (Tg), as consequence of the scissions of its polymer chains. Then, the irradiated WEPS was sulfonated, and its degree of sulfonation (DS) was measured.

Reduction of pollutants and disinfection of industrial wastewater by an integrated system of copper electrocoagulation and electrochemically generated hydrogen peroxide.

The objective of this study was to evaluate the effect of copper electrocoagulation and hydrogen peroxide on COD, color, turbidity, and bacterial activity in a mixed industry wastewater. The integrated system of copper electrocoagulation and hydrogen peroxide is effective at reducing the organic and bacterial content of industrial wastewater. The copper electrocoagulation alone reduces COD by 56% in 30 min at pH 2.

Removal of organic pollutants in industrial wastewater with an integrated system of copper electrocoagulation and electrogenerated H₂O₂.

The effectiveness of organics removal of an integrated electrochemical process, namely, electrocoagulation with copper ions followed by the use of electrogenerated hydrogen peroxide was evaluated with an industrial wastewater. The copper (II) ions addition into the wastewater using electro-dissolution of copper electrodes, reduces the chemical oxygen demand (COD) by 56% after 30 min of treatment, under optimal conditions of pH 2,8 and 14.2 mA cm(-2) of current density.

Green method to form iron oxide nanorods in orange peels for chromium(VI) reduction.

A green method for synthesizing iron oxide nanorods within orange peel pith has been developed. Orange peel pith functions as both a support and a reducing agent for iron ions. The nanorods were characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy and X-ray photoelectron spectroscopy.

Biosorption of Cr(III) and Fe(III) in single and binary systems onto pretreated orange peel.

Trivalent chromium and iron are the products of the traditional reduction of hexavalent chromium by ferrous salts in industrial wastewater. Although there have been a few studies of Cr(III) adsorption, none have considered the effect of Fe(III) on Cr(III) adsorption in a binary system representing expected products of hexavalent chromium in industrial wastewater. The biosorption of Cr(III) and Fe(III) ions onto pretreated ground orange peel in single and binary systems was studied in batch experiments using a variety of techniques.

A review of chemical, electrochemical and biological methods for aqueous Cr(VI) reduction.

Hexavalent chromium is of particular environmental concern due to its toxicity and mobility and is challenging to remove from industrial wastewater. It is a strong oxidizing agent that is carcinogenic and mutagenic and diffuses quickly through soil and aquatic environments. It does not form insoluble compounds in aqueous solutions, so separation by precipitation is not feasible.

Use of pH-sensitive polymer hydrogels in lead removal from aqueous solution.

Three gamma crosslinked polymeric hydrogels were synthesized and evaluated as lead ion sorbents. A crosslinked poly(acrylic acid) hydrogel was compared with two 4-vinylpiridine-grafted poly(acrylic acid) hydrogels (26.74 and 48.

Cr(VI) reduction in wastewater using a bimetallic galvanic reactor.

The electrochemical reduction of Cr(VI)-Cr(III) in wastewater by iron and copper-iron bimetallic plates was evaluated and optimized. Iron has been used as a reducing agent, but in this work a copper-iron galvanic system in the form of bimetallic plates is applied to reducing hexavalent chromium. The optimal pH (2) and ratio of copper to iron surface areas (3.

A combined electrocoagulation-electrooxidation treatment for industrial wastewater.

This study addresses the elimination of persistent organic compounds in industrial wastewater using a synergistic combination of electrocoagulation and electrooxidation. Electrocoagulation is a relatively quick process (30 min), which is very effective in removing colloidal and suspended particles, as seen in changes in coliforms, turbidity, and color and in the general absorbance by UV-vis spectroscopy. However, it is relatively ineffective in eliminating stable persistent organic compounds--in this work, only half of the COD was eliminated from wastewater and an oxidation peak in the cyclic voltammetry scan remained.

A comparative study of natural, formaldehyde-treated and copolymer-grafted orange peel for Pb(II) adsorption under batch and continuous mode.

Natural, formaldehyde-treated and copolymer-grafted orange peels were evaluated as adsorbents to remove lead ions from aqueous solutions. The optimum pH for lead adsorption was found to be pH 5. The adsorption process was fast, reaching 99% of sorbent capacity in 10 min for the natural and treated biomasses and 20 min for the grafted material.

A combined electrocoagulation-sorption process applied to mixed industrial wastewater.

The removal of organic pollutants from a highly complex industrial wastewater by a aluminium electrocoagulation process coupled with biosorption was evaluated. Under optimal conditions of pH 8 and 45.45 Am(-2) current density, the electrochemical method yields a very effective reduction of all organic pollutants, this reduction was enhanced when the biosorption treatment was applied as a polishing step.

Removal of chromium and toxic ions present in mine drainage by Ectodermis of Opuntia.

This work presents conditions for hexavalent and trivalent chromium removal from aqueous solutions using natural, protonated and thermally treated Ectodermis of Opuntia. A removal of 77% of Cr(VI) and 99% of Cr(III) can be achieved. The sorbent material is characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, infrared spectroscopy, thermogravimetric analysis, before and after the contact with the chromium containing aqueous media.