Optimising β-Ti21S Alloy Lattice Structures for Enhanced Femoral Implants: A Study on Mechanical and Biological Performance.

The metastable β-Ti21S alloy exhibits a lower elastic modulus than Ti-6Al-4V ELI while maintaining high mechanical strength and ductility. To address stress shielding, this study explores the integration of lattice structures within prosthetics, which is made possible through additive manufacturing. Continuous adhesion between the implant and bone is essential; therefore, auxetic bow-tie structures with a negative Poisson's ratio are proposed for regions under tensile stress, while Triply Periodic Minimal Surface (TPMS) structures with a positive Poisson's ratio are recommended for areas under compressive stress.

High fidelity adaptive mirror simulations with reduced order models.

In the design process of large adaptive mirrors numerical simulations represent the first step to evaluate the system design compliance in terms of performance, stability and robustness. For the next generation of Extremely Large Telescopes increased system dimensions and bandwidths lead to the need of modeling not only the deformable mirror alone, but also all the system supporting structure or even the full telescope. The capability to perform the simulations with an acceptable amount of time and computational resources is highly dependent on finding appropriate methods to reduce the size of the resulting dynamic models.

Metrological characterization of porosity graded β-Ti21S triply periodic minimal surface cellular structure manufactured by laser powder bed fusion.

The design of a functionally graded porous structure (FGPS) for use in prosthetic devices is crucial for meeting both mechanical and biological requirements. One of the most commonly used cellular structures in FGPS is the triply periodic minimal surface (TPMS) structure due to its ability to be defined by implicit equations, which allows for smooth transitions between layers. This study evaluates the feasibility of using a novel β-Ti21S alloy to fabricate TPMS-based FGPS.

Manufacturability of functionally graded porous β-Ti21S auxetic architected biomaterials produced by laser powder bed fusion: Comparison between 2D and 3D metrological characterization.

Functionally graded porous structures (FGPSs) are attracting increasing interest in the manufacture of prostheses that benefit from lower stiffness and optimized pore size for osseointegration. In this work, we explore the possibility of employing FGPSs with auxetic unit cells. Their negative Poisson's ratio was exploited to reduce the loss of connection between prosthesis and bone usually occurring in standard implant loaded under tension and therefore undergoing lateral shrinking.

Ecophysiological Response of L. in an Urban Agrosystem: Preliminary Assessment of Genetic Variability.

Urban agriculture is an emerging challenge. Identifying suitable agrosystems that allow for the multiple functions of urban agriculture represents a key issue for the reinforcement of the agricultural matrix in cities, with the aims of counteracting and adapting to climate change and providing economic and social benefits. This study aims to produce a preliminary assessment of the adaptability of Italian native and non-native Vitis vinifera L.

Physical Properties and Color Stainability by Coffee and Red Wine of Opaque and High Translucency Zirconia Dental Ceramics after Hydrothermal Degradation.

The objective was to evaluate the bending strength, phase transformation, roughness, and color stainability by coffee and red wine of opaque and high translucency yttria-stabilized zirconia before and after hydrothermal degradation in saline solution or oral mouthwash. Presintered zirconia blocks with medium opacity (ZrO-3 mol. % of YO) designed as ZrOp and high translucency zirconia (5.

A Single-Case Design Investigation for Measuring the Efficacy of Gestalt Therapy to Treat Depression in Older Adults with Dementia in Italy and in Mexico: A Research Protocol.

Psychotherapy is one of the evidence-based clinical interventions for the treatment of depression in older adults with dementia. Randomised controlled trials are often the first methodological choice to gain evidence, yet they are not applicable to a wide range of humanistic psychotherapies. Amongst all, the efficacy of the Gestalt therapy (GT) is under-investigated.

Ultrastructural and Physicochemical Characterization of a Non-Crosslinked Type 1 Bovine Derived Collagen Membrane.

In this work, in vitro testing was used to study the properties of non-crosslinked type 1 bovine derived collagen membranes used in bone regeneration surgery. Collagen membranes were prepared, their surface roughness was quantified by interferometry, their morphology was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), their wettability was measured by the contact angle technique, their mechanical properties were investigated by tensile testing, their phase transformation temperatures were measured by Differential Scanning Calorimetry (DSC), and their biocompatibility was evaluated by immunological testing. The calorimetry tests showed that the membrane is formed only by type 1 collagen.

Difference between the cell wall roughnesses of mothers and daughters of Saccharomyces cerevisiae subjected to high pressure stress.

High hydrostatic pressure (HHP) stress generates cellular responses similar to those to other stresses that yeasts endure in fermentation tanks. Structural and spatial compaction of molecules, as well as weakening and stretching of plasma membranes and cell walls, are often observed and have a significant influence on the fermentative process. Atomic force microscopy (AFM) yields accurate data on the morphological characteristics of yeast cell walls, providing important insights for the development of more productive yeast strains.

Using UAV-based remote sensing to assess grapevine canopy damage due to fire smoke.

Background: Bushfires are becoming an increasing issue for the wine sector due to grape and vine losses and smoke taint in wine. Smoke affects vine physiology and the smoke's volatile phenols are absorbed by plants and berries, contaminating the wine. Our hypothesis was that, for the first time, unmanned aerial vehicle (UAV)-based visible images can be used to study the physiology of smoke-affected vines and to assess compromised vines.

Assessing Impacts of Climate Change on Phenology and Quality Traits of L.: The Contribution of Local Knowledge.

Developing adaptation strategies in , a crop sensitive to climate change, is crucial for resilience of traditional viticultural systems, especially in climate-vulnerable areas like the Mediterranean basin. A progressive warming is demonstrated to alter the geographical distribution of grapevine, reducing land capability for typical grapes and vine productions in most Southern European districts traditionally specialized in tree crops. Grapevine growth and reproduction under climate change require a continuous monitoring to adapt agronomic practices and strategies to global change.

Second-Generation Bioethanol from Coconut Husk.

Coconut palm () is an important commercial crop in many tropical countries, but its industry generates large amounts of residue. One way to address this problem is to use this residue, coconut husk, to produce second-generation (2G) ethanol. The aim of this review is to describe the methods that have been used to produce bioethanol from coconut husk and to suggest ways to improve different steps of the process.

Synthetic Approaches for the Preparation of Phosphoramidate Prodrugs of 2'-Deoxypseudoisocytidine.

A synthetic procedure for the preparation of phosphoramidate prodrugs of -nucleosides is reported. Different phosphorochloridates were reacted with 3'--protected -acetyl-2'-deoxypseudoisocytidine or 3'--protected 2'-deoxypseudoisocytidine, followed by acidic hydrolysis of the protecting group. In the presence of the -acetyl moiety, the enolisable keto group of the nucleobase was able to react (like the 5'-OH) with the phosphorochloridates to give bisphosphorylated derivatives.

Use of Depth Measure for Multivariate Functional Data in Disease Prediction: An Application to Electrocardiograph Signals.

In this paper we develop statistical methods to compare two independent samples of multivariate functional data that differ in terms of covariance operators. In particular we generalize the concept of depth measure to this kind of data, exploiting the role of the covariance operators in weighting the components that define the depth. Two simulation studies are carried out to validate the robustness of the proposed methods and to test their effectiveness in some settings of interest.

Tapetum and middle layer control male fertility in Actinidia deliciosa.

Background And Aims: Dioecism characterizes many crop species of economic value, including kiwifruit (Actinidia deliciosa). Kiwifruit male sterility occurs at the microspore stage. The cell walls of the microspores and the pollen of the male-sterile and male-fertile flowers, respectively, differ in glucose and galactose levels.

Martensitic transformation of austenitic stainless steel orthodontic wires during intraoral exposure.

Introduction: Our purpose was to study the mechanical properties and phase transformations of orthodontic wires submitted to in-vivo exposure in the mouth for different periods of time.

Methods: Stainless steel wires were tied to fixed orthodontic appliances of 30 patients from the orthodontics clinic of Universidade Federal do Rio de Janeiro School of Dentistry in Brazil. According to the duration of the clinical treatment, the patients were divided into 3 groups.

Polyamine biosynthesis and control of the development of functional pollen in kiwifruit.

The role of polyamines (PAs) in plant reproduction, especially pollen development and germination has been demonstrated in several higher plants. The aim of the present research was to investigate PA involvement in pollen development and germination in dioecious kiwifruit (Actinidia deliciosa). Differences in PA content, level and gene expression for PA biosynthetic enzymes, and the effect of PA biosynthetic inhibitors were found during pollen development (or abortion in female flowers).

Immune tolerance induction in haemophilia A patients with high-responding inhibitors to factor VIII: experience at a single institution.

Inhibitor antibodies to transfused factor VIII pose significant challenges in the management of haemophilia A patients. The main concern is the inefficacy of replacement therapy in patients with high-titre antibodies, who have a shorter life-span and a greater morbidity compared to subjects without inhibitors. The ultimate goal in treating these patients is to eliminate the inhibitor antibody entirely, allowing the recommencement of specific replacement therapy.

Major surgery for a gastric cancer in a haemophilic with high inhibitor titre successfully performed by the use of recombinant FVIIa.

A total gastrectomy with omentectomy and resection of the distal oesophagus in a 69-year-old haemophilia A patient with high inhibitor of 128 Bethesda units is described. Surgery was successfully performed after infusion of 112 microg kg-1 bw of recombinant FVIIa. Ninety-two microg kg-1 were given thereafter at time intervals of 2 h until 12 h, then every 3 h until 24 h, and every 4 h until 48 h after surgery.

Successful immune tolerance treatment with monoclonal or recombinant factor VIII concentrates in high responding inhibitor patients.

Very high purity factor VIII (FVIII) concentrates (plasma-derived or produced by recombinant-DNA technology) were used to achieve immune tolerance in five patients with high-responding inhibitors to FVIII. The mean time required for inhibitor disappearance was 5 months. Four out of five patients showed normalisation of the half-life of infused FVIII after 8-18 months of treatment with 100 IU FVIII/kg body weight administered once daily.

The impact of a very high-purity factor VIII concentrate on the immune system of HIV-infected haemophiliacs: a randomized, two-year comparison with a high-purity concentrate.

Randomized and cohort studies have provided evidence confirming the hypothesis, based on in-vitro observations, that the use of very high-purity factor VIII (FVIII) concentrates, either immuoaffinity chromatography purified or produced by recombinant DNA technology, may slow immunological deterioration in human immunodeficiency virus (HIV)-infected haemophiliacs, while high-purity concentrates, produced by ion-exchange chromatography, did not produce a benefit. Even though these data clearly indicate that very high-purity concentrates should be preferred for the replacement therapy of HIV-positive haemophiliacs, there are little data, based on direct comparison, supporting the use of very high-purity concentrates rather than high-purity preparations, which are less expensive. In an attempt to address this issue, we prospectively compared CD4 cell counts and changes of clinical status in 18 HIV-positive haemophiliacs, randomly assigned either to receive the treatment with a very high-purity FVIII concentrate, purified by immunoaffinity chromatography, or a high-purity product, produced by ion-exchange chromatography.

Epidemiology of hemophilia and of HIV infection in Italy. GICC. Gruppo Italiano Coagulopatie Congenite.

To evaluate the incidence and prevalence of hemophilia in Italy and the impact of HIV infection on the Italian hemophiliac population, data from a computerized national registry of patients from 95% of the hemophilia care centers in Italy were analyzed. A total of 4643 patients were included in the registry. The prevalence of hemophilia A was 8.

Patterns of immunogenicity of an inactivated hepatitis A vaccine in anti-HIV positive and negative hemophilic patients.

Hepatitis A vaccination has been recommended to patients with hemophilia since they are exposed to potentially infectious clotting factor concentrates. Aim of this study was to assess the immunogenicity of vaccination in hemophiliacs, infected or not with the human immunodeficiency virus (HIV). A formalin-inactivated hepatitis A vaccine was injected subcutaneously to 113 susceptible adults and children and repeated after 1 and 6 months.