The Application of TiO/ZrO-Modified Nanocomposite PES Membrane for Improved Permeability of Textile Dye in Water.

This study investigates the modification of polyethersulfone (PES) membranes with 1 wt% titanium dioxide (TiO), zirconium dioxide (ZrO) and a nanocomposite of TiO/ZrO. The aim was to efficiently remove Rhodamine B (RhB) from water using a threefold approach of adsorption, filtration and photodegradation. Among the modified membranes (TiO, ZrO and TiO/ZrO), the TiO/ZrO-PES nanocomposite membrane showed a better performance in rejection of RhB than other membranes with the rejection efficiency of 96.

Exploring acid mine drainage treatment through adsorption: a bibliometric analysis.

Discharge of acidic wastewater from mining activities (acid mine drainage (AMD)) is a major global environmental and public health issue. Although several approaches, including chemical precipitation and membrane technology, have been developed to treat AMD, adsorption has emerged as the most promising technology due to its cost-effectiveness and efficacy. Despite the wide adoption of adsorption in treating AMD, the evolution of research in this area remains poorly understood.

Nanostructured Carbon Fibres (NCF): Fabrication and Application in Supercapacitor Electrode.

A facile interconnected nanofibre electrode material derived from polybenzimidazol (PBI) was fabricated for a supercapacitor using a centrifugal spinning technique. The PBI solution in a mixture of dimethyl acetamide (DMA) and N, N-dimethylformamide (DMF) was electrospun to an interconnection of fine nanofibres. The as-prepared material was characterised by using various techniques, which include scanning electron microscopy (SEM), X-ray diffractometry (XRD), Raman, X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) among others.

Graphene Oxide Enhanced Monoethanolamine and Ethylenediamine Nanofluids for Efficient Carbon Dioxide Uptake from Flue Gas.

The addition of nanoparticles in amine solutions to produce a stable amine-based nanofluid provides a high surface area for absorption and improves the absorption rate. In this work, nanofluids were prepared by dispersing graphene oxide (GO) in monoethanolamine (MEA) and ethylenediamine (EDA) solutions for adsorption of carbon dioxide (CO) to further improve their absorption performance by providing more reaction sites on the GO framework. GO was synthesized using the modified Hummers method and characterized for physicochemical properties using SEM, EDS, FTIR, Raman analysis, and TGA.

An optimised and validated surrogate analyte A-TEEM-PARAFAC-PLS technique for detecting and quantifying the biological oxygen demand in surface water.

A 5-day test duration makes BOD measurement unsatisfactory and hinders the development of a quick technique. Protein-like fluorescence peaks show a strong correlation between the BOD characteristics and the fluorescence intensities. For identifying and measuring BOD in surface water, a simultaneous absorbance-transmittance and fluorescence excitation-emission matrices (A-TEEM) method combined with PARAFAC (parallel factor) and PLS (partial least squares) analyses was developed using a tyrosine and tryptophan (tyr-trpt) mix as a surrogate analyte for BOD.

The removal of pathogenic bacteria and dissolved organic matter from freshwater using microporous membranes: insights into biofilm formation and fouling reversibility.

Pathogenic bacteria in drinking-water pose a health risk to consumers, as they compromise the quality of portable water. Chemical disinfection of water containing dissolved organic matter (DOM) causes harmful disinfection by-products. In this work, 4-hydroxybenzoic acid (4-HBA) blended polyethersulfone membranes were fabricated and characterised using microscopic and spectroscopic techniques.

A facile method for preparing the CeMnO catalyst with high activity and stability of toluene oxidation: The critical role of small crystal size and Mn-O-Ce sites.

Volatile organic compounds (VOCs) cause severe environmental pollution and are potentially toxic to humans who have no defense against exposure. Catalytic oxidation of these compounds has thus become an interesting research topic. In this study, microcrystalline CeMnO catalysts were prepared by a precipitant-concentration-induced strategy and evaluated for the catalytic oxidation of toluene/benzene.

Chelation-directed interface engineering of in-place self-cleaning membranes.

Water-energy sustainability will depend upon the rapid development of advanced pressure-driven separation membranes. Although energy-efficient, water-treatment membranes are constrained by ubiquitous fouling, which may be alleviated by engineering self-cleaning membrane interfaces. In this study, a metal-polyphenol network was designed to direct the armorization of catalytic nanofilms (ca.

Functionalities of electrochemical fluoroquinolone sensors and biosensors.

Fluoroquinolones (FQs) are a class of broad-spectrum antimicrobial agents that are used to treat variety of infectious diseases. This class of antibiotics was being used for patients exhibiting early symptoms of a human respiratory disease known as the COVID-19 virus. As a result, this outbreak causes an increase in drug-resistant strains and environmental pollution, both of which pose serious threats to biota and human health.

Detection and Quantification of Bisphenol A in Surface Water Using Absorbance-Transmittance and Fluorescence Excitation-Emission Matrices (A-TEEM) Coupled with Multiway Techniques.

In the present protocol, we determined the presence and concentrations of bisphenol A (BPA) spiked in surface water samples using EEM fluorescence spectroscopy in conjunction with modelling using partial least squares (PLS) and parallel factor (PARAFAC). PARAFAC modelling of the EEM fluorescence data obtained from surface water samples contaminated with BPA unraveled four fluorophores including BPA. The best outcomes were obtained for BPA concentration (R = 0.

CFD-Assisted Process Optimization of an Integrated Photocatalytic Membrane System for Water Treatment.

An integrated photocatalytic membrane system (IPMS) was developed for potential use in the remediation of naproxen using real water samples from a drinking water treatment plant. Key parameters such as time, pH, water matrix, mixing speeds, flow rate, and light intensity undeniably affected photocatalytic and membrane separation processes. The system optimization was based on improving irradiation to generate a more reactive species and mass transfer to increase the reaction rate.

Electrochemical, surface morphological and computational evaluation on carbohydrazide Schiff bases as corrosion inhibitor for mild steel in acidic medium.

Anticorrosion and adsorption behaviour of synthesized carbohydrazide Schiff bases, namely (Z)-N'-(4-hydroxy-3-methoxybenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide(MBTC) and (Z)-N'-(3,4-dichlorobenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide (CBTC) was examined for mild steel (MS) in 15% HCl medium. The corrosion inhibition study was performed by using gravimetric, thermodynamic, electrochemical and theoretical studies including density functional theory (DFT), molecular dynamic simulation (MDS) and Monte Carlo simulations (MCS). The outcomes in terms of corrosion inhibition efficiency using electrochemical impedance spectroscopy (EIS) method at 303 K and 150 ppm concentration were 96.

Preparation of Novel Solid Phase Extraction Sorbents for Polycyclic Aromatic Hydrocarbons (PAHs) in Aqueous Media.

In this study, functionalized mesoporous silica was prepared and characterized as a stationary phase using various analytical and solid-state techniques, including a Fourier-transform infrared (FTIR) spectrometer, thermogravimetric analysis, and nitrogen sorption. The results confirmed the successful synthesis of the hybrid stationary phase. The potential of the prepared hybrid mesoporous silica as a solid-phase extraction (SPE) stationary phase for separating and enriching polycyclic aromatic hydrocarbons (PAHs) in both spiked water samples and real water samples was evaluated.

Role of Membrane-Solute Affinity Interactions in Carbamazepine Rejection and Resistance to Organic Fouling by Nano-Engineered UF/PES Membranes.

In this study, polyethersulfone (PES) ultrafiltration (UF) membranes were modified with GO, Ag, ZnO, Ag-GO and ZnO-GO nanoparticles to improve carbamazepine removal and fouling prevention by making membrane surfaces more hydrophilic. The fabricated membranes were characterized for surface and cross-sectional morphology, surface roughness and zeta potential, as well as hydrophilicity, functional groups, surface tension parameters and water permeability Thereafter, the membranes were evaluated for their efficiency in removing MgSO and carbamazepine as well as antifouling properties. To understand the role of affinity interactions in rejection and fouling, membrane-solute adhesion energies (∆Gslm) were quantified based on the Lifshitz-van der Waals/acid-base method.

MnO/CuO heterostructure for nitrate electroreduction to ammonia.

Here, we designed a MnO/CuO heterostructure supported on copper foil (CF) for electrocatalytic nitrate reduction to ammonia. The selectivity and Faraday efficiency of ammonia were 96.79% and 86.

Advancements in electrochemical technologies for the removal of fluoroquinolone antibiotics in wastewater: A review.

In recent times, the need to make water safer and cleaner through the elimination of recalcitrant pharmaceutical residues has been the aim of many studies. Fluoroquinolone antibiotics such as ciprofloxacin, norfloxacin, enrofloxacin, and levofloxacin are among the commonly detected pharmaceuticals in wastewater. Since the presence of these pharmaceuticals in water bodies poses serious risks to living organisms, it is vital to adopt effective wastewater treatment techniques for their complete removal.

Ultra-Permeable Dual-Mechanism-Driven Graphene Oxide Framework Membranes for Precision Ion Separations.

Two-dimensional graphene oxide (GO) membranes are gaining popularity as a promising means to address global water scarcity. However, current GO membranes fail to sufficiently exclude angstrom-sized ions from solution. Herein, a de novo "posterior" interfacial polymerization (p-IP) strategy is reported to construct a tailor-made polyamide (PA) network in situ in an ultrathin GO membrane to strengthen size exclusion while imparting a positively charged membrane surface to repel metal ions.

Using Nanomaterials as Excellent Immobilisation Layer for Biosensor Design.

The endless development in nanotechnology has introduced new vitality in device fabrication including biosensor design for biomedical applications. With outstanding features like suitable biocompatibility, good electrical and thermal conductivity, wide surface area and catalytic activity, nanomaterials have been considered excellent and promising immobilisation candidates for the development of high-impact biosensors after they emerged. Owing to these reasons, the present review deals with the efficient use of nanomaterials as immobilisation candidates for biosensor fabrication.

Delayed Solvent-Nonsolvent Demixing Preparation and Performance of a Highly Permeable Polyethersulfone Ultrafiltration Membrane.

Membrane performance optimization is a critical preparation step that ensures optimum separation and fouling resistance. Several studies have employed additives such as carbon and inorganic nanomaterials to optimize membrane performance. These particles provide excellent results but are rather costly, unstable and toxic to several biological organs.

Advances in polymer-based detection of environmental ibuprofen in wastewater.

Globally, ibuprofen is the third most consumed drug and its presence in the environment is a concern because little is known about its adverse effects on humans and aquatic life. Environmentalists have made monitoring and the detection of ibuprofen in biological and environmental matrices a priority. For the detection and monitoring of ibuprofen, sensors and biosensors have provided rapid analysis time, sensitivity, high-throughput screening, and real-time analysis.

Enhanced visible light driven photoelectrochemical degradation of tetracycline hydrochloride using a BiOI photoanode modified with MnO films.

Removal of pharmaceuticals in wastewater has been the focus of many research due to the recalcitrant nature and hazardous effects of these compounds. The photoelectrochemical degradation process has proven to be suitable to harness solar energy for the mineralization of organic compounds in wastewater. Herein, we report the application of BiOI/MnO heterostructured anode for the photoelectrochemical degradation of tetracycline hydrochloride in aqueous solution.

The application of photoelectrocatalysis in the degradation of rhodamine B in aqueous solutions: a review.

The pollution of the water environment by industrial effluents is an ongoing challenge due to the rate of industrialisation and globalisation. Photoelectrocatalysis (PEC), an electrochemical advanced oxidation process, has proven to be an effective method for removing organics from wastewater. Photoelectrocatalysis is environmentally benign, cost-effective and easy to operate.

In Situ Generation of Fouling Resistant Ag/Pd Modified PES Membranes for Treatment of Pharmaceutical Wastewater.

In this study, Ag and Pd bimetallic nanoparticles were generated in situ in polyethersulfone (PES) dope solutions, and membranes were fabricated through a phase inversion method. The membranes were characterized for various physical and chemical properties using techniques such as FTIR, SEM, AFM, TEM, EDS, and contact angle measurements. The membranes were then evaluated for their efficiency in rejecting EOCs and resistance to protein fouling.

Interdependence of Kinetics and Fluid Dynamics in the Design of Photocatalytic Membrane Reactors.

Photocatalytic membrane reactors (PMRs) are a promising technology for wastewater reclamation. The principles of PMRs are based on photocatalytic degradation and membrane rejection, the different processes occurring simultaneously. Coupled photocatalysis and membrane filtration has made PMRs suitable for application in the removal of emerging contaminants (ECs), such as diclofenac, carbamazepine, ibuprofen, lincomycin, diphenhydramine, rhodamine, and tamoxifen, from wastewater, while reducing the likelihood of byproducts being present in the permeate stream.