Unraveling the Applicability of LbL Coatings for Drug Delivery in Dental Implant-Related Infection Treatment.

Peri-implantitis is an inflammatory condition caused by bacterial biofilms adhered on dental implant surfaces that cause progressive tissue destruction from the host's inflammatory response. The adverse effects of peri-implantitis progression can go beyond just losing the implant. This highlights the importance of implementing strategies to stabilize disease in the short term.

Development of Zinc-Containing Chitosan/Gelatin Coatings with Immunomodulatory Effect for Soft Tissue Sealing around Dental Implants.

Background: Soft tissue integration (STI) around dental implant abutments is a prerequisite to prevent bacterial invasion and achieve successful dental implant rehabilitation. However, peri-implant STI is a major challenge after dental abutment placement due to alterations in the immune microenvironment upon surgical dental implant installation.

Methods: Based on known immunomodulatory effects of zinc, we herein deposited zinc/chitosan/gelatin (Zn/CS/Gel) coatings onto titanium substrates to study their effect on macrophages.

Cisplatin-functionalized dual-functional bone substitute granules for bone defect treatment after bone tumor resection.

Invasive bone tumors pose a significant healthcare challenge, often requiring systemic chemotherapy and limb salvage surgery. However, these strategies are hampered by severe side effects, complex post-resection bone defects, and high local recurrence rates. To address this, we developed dual-functional bone substitute biomaterials by functionalizing commercially available bone substitute granules (Bio-Oss® and MBCP®+) with the established anticancer agent cisplatin.

Compositional Variations in Calcium Phosphate Cement and Poly(Lactic-Co-Glycolic-Acid) Porogens Do Not Affect the Orthotopic Performance of Calcium Phosphate Cement/Poly(Lactic-Co-Glycolic-Acid) Cements.

Calcium phosphate cement (CPC) has evolved as an appealing bone substitute material, especially since CPCs were combined with poly(lactic-co-glycolic acid) (PLGA) porogens to render the resulting CPC/PLGA composite degradable. In view of the multiple variables of CPC and PLGA used previously, the effect of CPC composition and PLGA porogen morphology (i.e.

Progress in Designing Therapeutic Antimicrobial Hydrogels Targeting Implant-associated Infections: Paving the Way for a Sustainable Platform Applied to Biomedical Devices.

Implantable biomedical devices have found widespread use in restoring lost functions or structures within the human body, but they face a significant challenge from microbial-related infections, which often lead to implant failure. In this context, antimicrobial hydrogels emerge as a promising strategy for treating implant-associated infections owing to their tunable physicochemical properties. However, the literature lacks a comprehensive analysis of antimicrobial hydrogels, encompassing their development, mechanisms, and effect on implant-associated infections, mainly in light of existing in vitro, in vivo, and clinical evidence.

Unraveling devitalization: its impact on immune response and ectopic bone remodeling from autologous and allogeneic callus mimics.

Endochondral bone regeneration is a promising approach in regenerative medicine. Callus mimics (CMs) are engineered and remodeled into bone tissue upon implantation. The long-term objective is to fabricate a sustainable off-the-shelf treatment option for patients.

Upscaling Osteoclast Generation by Enhancing Macrophage Aggregation Using Hollow Microgels.

Osteoclasts, the bone resorbing cells of hematopoietic origin formed by macrophage fusion, are essential in bone health and disease. However, in vitro research on osteoclasts remains challenging due to heterogeneous cultures that only contain a few multinucleated osteoclasts. Indeed, a strategy to generate homogeneous populations of multinucleated osteoclasts in a scalable manner has remained elusive.

Modelling bone metastasis in spheroids to study cancer progression and screen cisplatin efficacy.

Most bone metastases are caused by primary breast or prostate cancer cells settling in the bone microenvironment, affecting normal bone physiology and function and reducing 5-year survival rates to 10% and 6%, respectively. To expedite clinical availability of novel and effective bone metastases treatments, reliable and predictive in vitro models are urgently required to screen for novel therapies as current in vitro 2D planar mono-culture models do not accurately predict the clinical efficacy. We herein engineered a novel human in vitro 3D co-culture model based on spheroids to study dynamic cellular quantities of (breast or prostate) cancer cells and human bone marrow stromal cells and screen chemotherapeutic efficacy and specificity of the common anticancer drug cisplatin.

Cleaved SPP1-rich extracellular vesicles from osteoclasts promote bone regeneration via TGFβ1/SMAD3 signaling.

Bone remodeling is a tightly coupled process between bone forming osteoblasts (OBs) and bone resorbing osteoclasts (OCs) to maintain bone architecture and systemic mineral homeostasis throughout life. However, the mechanisms responsible for the coupling between OCs and OBs have not been fully elucidated. Herein, we first validate that secreted extracellular vesicles by osteoclasts (OC-EVs) promote osteogenic differentiation of mesenchymal stem cells (MSCs) and further demonstrate the efficacy of osteoclasts and their secreted EVs in treating tibial bone defects.

Osmolarity-Induced Altered Intracellular Molecular Crowding Drives Osteoarthritis Pathology.

Osteoarthritis (OA) is a multifactorial degenerative joint disease of which the underlying mechanisms are yet to be fully understood. At the molecular level, multiple factors including altered signaling pathways, epigenetics, metabolic imbalance, extracellular matrix degradation, production of matrix metalloproteinases, and inflammatory cytokines, are known to play a detrimental role in OA. However, these factors do not initiate OA, but are mediators or consequences of the disease, while many other factors causing the etiology of OA are still unknown.

Bifunctional bone substitute materials for bone defect treatment after bone tumor resection.

Aggressive benign, malignant and metastatic bone tumors can greatly decrease the quality of patients' lives and even lead to substantial mortality. Several clinical therapeutic strategies have been developed to treat bone tumors, including preoperative chemotherapy, surgical resection of the tumor tissue, and subsequent systemic chemo- or radiotherapy. However, those strategies are associated with inevitable drawbacks, such as severe side effects, substantial local tumor recurrence, and difficult-to-treat bone defects after tumor resection.

The effect of surface roughening on the success of orthodontic mini-implants: A systematic review and meta-analysis.

Introduction: Orthodontic mini-implants are a widely accepted treatment modality in orthodontics; however, the failure rate is moderately high. Surface roughening is the golden standard in conventional oral implantology, and this may prove beneficial for orthodontic mini-implants as well. The objective of this systematic review is to assess the effect of surface roughening on the success rate of orthodontic mini-implants in both adolescent and adult patients undergoing orthodontic treatment.

Polyethylene glycol precipitation is an efficient method to obtain extracellular vesicle-depleted fetal bovine serum.

Mesenchymal stromal/stem cell derived-extracellular vesicles (MSC-EVs) have gained interest as drug delivery nanoparticles, having immunoregulatory and potentiating tissue repair property. To maintain growth of MSCs and obtain pure MSC-derived EVs, the culture media should contain fetal bovine serum (FBS) devoid of EVs, as the presence of FBS EVs confounds the properties of MSC-EVs. Therefore, we tested three methods: 18h ultracentrifugation (UC) and ultrafiltration (UF), which are common FBS EV depletion methods in current MSC-EV research, and polyethylene glycol (PEG) precipitation to obtain three EV depleted FBS (EVdFBS) batches, and compared them to FBS and commercial (Com) EVdFBS on human adipose stem cell (hADSC) growth, differentiation, enrichment of EVs in hADSC supernatant and their biological function on collagen metabolism.

Influence of bisphosphonate treatment on bone substitute performance in osteoporotic conditions.

Objective: Considering the elevated number of osteoporotic patients in need of bone graft procedures, we here evaluated the effect of alendronate (ALN) treatment on the regeneration of bone defects in osteoporotic rats. Bone formation was histologically and histomorphometrically assessed in rat femoral condyle bone defects filled with bone graft (Bio-Oss®) or left empty.

Methods: Male Wistar rats were induced osteoporotic through orchidectomy (ORX) and SHAM-operated.

Lateral Bone Augmentation Using a Three-Dimensional-Printed Polymeric Chamber to Compare Biomaterials.

The aim of this study was to test the suitability of calcium phosphate cement mixed with poly(lactic--glycolic acid) (CPC-PLGA) microparticles into a ring-shaped polymeric space-maintaining device as bone graft material for lateral bone augmentation. Therefore, the bone chambers were installed on the lateral portion of the anterior region of the mandibular body of mini-pigs. Chambers were filled with either CPC-PLGA or BioOss particles for comparison and left for 4 and 12 weeks.

Comparison of Osteogenic Capacity and Osteoinduction of Adipose Tissue-Derived Cell Populations.

Stromal vascular fraction (SVF) is the primary isolate obtained after enzymatic digestion of adipose tissue that contains various cell types. Its successful application for cell-based construct preparation in an intra-operative setting for clinical bone augmentation and regeneration has been previously reported. However, the performance of SVF-based constructs compared with traditional expanded adipose tissue-derived mesenchymal stromal cells (ATMSCs) remains unclear and direct comparative analyses are scarce.

Repair of complex ovine segmental mandibulectomy utilizing customized tissue engineered bony flaps.

Craniofacial defects require a treatment approach that provides both robust tissues to withstand the forces of mastication and high geometric fidelity that allows restoration of facial architecture. When the surrounding soft tissue is compromised either through lack of quantity (insufficient soft tissue to enclose a graft) or quality (insufficient vascularity or inducible cells), a vascularized construct is needed for reconstruction. Tissue engineering using customized 3D printed bioreactors enables the generation of mechanically robust, vascularized bony tissues of the desired geometry.

Fast Degradable Calcium Phosphate Cement for Maxillofacial Bone Regeneration.

The aim of this preclinical study was to test the applicability of calcium phosphate cement (CPC)-poly(lactic-co-glycolic acid) (PLGA)-carboxymethylcellulose (CMC) as a bone substitute material for guided bone regeneration (GBR) procedures in a clinically relevant mandibular defect model in minipigs. In the study, a predicate device (i.e.

Tailoring Cu-loaded electrospun membranes with antibacterial ability for guided bone regeneration.

Copper (Cu)-loaded electrospun membranes were tailored for guided bone regeneration (GBR), targeting the stimulation of innate cells active in bone growth and the prevention of bacterial infections. Functional GBR membranes were produced via an electrospinning set-up using a silk-based solution associated with polyethylene oxide (Silk/PEO - control). Experimental groups were loaded with copper oxide using varying weight percentages (0.

Race for Applicable Antimicrobial Dental Implant Surfaces to Fight Biofilm-Related Disease: Advancing in Laboratorial Studies vs Stagnation in Clinical Application.

Across years, potential strategies to fight peri-implantitis have been notoriously explored through the antimicrobial coating implant surfaces capable of interfering with the bacterial adhesion process. However, although experimental studies have significantly advanced, no product has been marketed so far. For science to reach the society, the commercialization of research outcomes is necessary to provide real advancement in the biomedical field.

Nanoindentation and nano-scratching of hydroxyapatite coatings for resorbable magnesium alloy bone implant applications.

The corrosion rate of Mg alloys is currently too high for viable resorbable implant applications. One possible solution is to coat the alloy with a hydroxyapatite (HA) layer to slow the corrosion and promote bone growth. As such coatings can be under severe stresses during implant insertion, we present a nano-mechanical and nano-tribological investigation of RF-sputtered HA films on AZ31 Mg alloy substrates.

Copper source determines chemistry and topography of implant coatings to optimally couple cellular responses and antibacterial activity.

Implant-related infections at the early healing period are considered one of the main risk factors in implant failure. Designing coatings that control bacterial adhesion and have cell stimulatory behavior remains a challenging strategy for dental implants. Here, we used plasma electrolytic oxidation (PEO) to produce antimicrobial coatings on commercially pure titanium (cpTi) using bioactive elements (calcium and phosphorus) and different copper (Cu) sources: copper acetate (CuAc), copper sulfate (CuS), and copper oxide (CuO); coatings containing only Ca and P (CaP) served as controls.