Rhodium-Catalyzed Direct ortho-Arylation of Anilines.

An efficient and broadly applicable rhodium-catalyzed direct ortho-arylation of anilines with aryl iodides relying on readily available aminophosphines as traceless directing groups is reported. Its scope and functional group compatibility were both found to be quite broad as a large variety of both aminophosphines and (hetero)aryl iodides, including complex ones, could be utilized. The ortho-arylated anilines could be obtained in high average yields, without any competing diarylation and with full regioselectivity, which constitutes a major step forward compared to other processes.

Selective C(aryl)-O bond cleavage in biorenewable phenolics.

Biorefining of lignocellulosic biomass a lignin first approach delivers a range of products with high oxygen content. Besides pulp, a lignin oil rich in guaiacols and syringols is obtained bearing multiple C(aryl)-OH and C(aryl)-OMe groups, typically named phenolics. Similarly, technical lignin can be used but is generally more difficult to process providing lower yields of monomers.

Advancements and Perspectives toward Lignin Valorization via O-Demethylation.

Lignin represents the largest aromatic carbon resource in plants, holding significant promise as a renewable feedstock for bioaromatics and other cyclic hydrocarbons in the context of the circular bioeconomy. However, the methoxy groups of aryl methyl ethers, abundantly found in technical lignins and lignin-derived chemicals, limit their pertinent chemical reactivity and broader applicability. Unlocking the phenolic hydroxyl functionality through O-demethylation (ODM) has emerged as a valuable approach to mitigate this need and enables further applications.

Dearomative Spirocyclization of Tryptamine-Derived Isocyanides via Iron-Catalyzed Carbene Transfer.

Tryptamine-derived isocyanides are valuable building blocks in the construction of spirocyclic indolenines and indolines via dearomatization of the indole moiety. We report the BuN[Fe(CO)NO]-catalyzed carbene transfer of α-diazo esters to 3-(2-isocyanoethyl)indoles, leading to ketenimine intermediates that undergo spontaneous dearomative spirocyclization. The utility of this iron-catalyzed carbene transfer/spirocyclization cascade was demonstrated by its use as a key step in the formal total synthesis of monoterpenoid indole alkaloids (±)-aspidofractinine, (±)-limaspermidine, (±)-aspidospermidine, and (±)-17-demethoxy--acetylcylindrocarine.

Synthesis of Levulinic Acids From Muconic Acids in Hot Water.

Levulinic acid is a key biorenewable platform molecule. Its current chemical production from sugars is plagued by limited yields, char formation and difficult separations. An alternative and selective route starting from muconic acid via simple heating in water at high temperature (180 °C) has been developed.

A Cobalt Mediated Nitrene Transfer -Wittig Cascade Reaction To Access 1,3,4-Oxadiazole Scaffolds.

A cobalt(II) mediated three-component synthesis of 5-substituted--sulfonyl-1,3,4-oxadiazol-2(3)-imines using sulfonyl azides, -isocyaniminotriphenylphosphorane (NIITP), and carboxylic acids has been developed. This one-pot tandem reaction starts with a nitrene transfer to NIITP, followed by addition of the carboxylic acid to the formed carbodiimide and subsequent intramolecular -Wittig reaction. Both the steric constraints of carboxylic acid and the stoichiometry of the employed cobalt salt determine the selectivity toward the two products, i.

Efficient Synthesis of Novel Plasticizers by Direct Palladium-Catalyzed Di- or Multi-carbonylations.

Diesters are of fundamental importance in the chemical industry and are used for many applications, e.g. as plasticizers, surfactants, emulsifiers, and lubricants.

Iron-Catalysed Carbene Transfer to Isocyanides as a Platform for Heterocycle Synthesis.

An iron-catalysed carbene transfer reaction of diazo compounds to isocyanides has been developed. The resulting ketenimines are trapped in situ with various bisnucleophiles to access a range of densely functionalized heterocycles (pyrimidinones, dihydropyrazolones, 1H-tetrazoles) in a one-pot process. The electron-rich Hieber anion ([Fe(CO) NO] ) facilitates efficient catalytic carbene transfer from acceptor-type α-diazo carbonyl compounds to isocyanides, providing a cost-efficient and benign alternative to similar noble metal-catalysed processes.

A practical concept for catalytic carbonylations using carbon dioxide.

The rise of CO in atmosphere is considered as the major reason for global warming. Therefore, CO utilization has attracted more and more attention. Among those, using CO as C1-feedstock for the chemical industry provides a solution.

Hydrogen Borrowing: towards Aliphatic Tertiary Amines from Lignin Model Compounds Using a Supported Copper Catalyst.

Upcoming biorefineries, such as lignin-first provide renewable aromatics containing unique aliphatic alcohols. In this context, a Cu-ZrO catalyzed hydrogen borrowing approach was established to yield tertiary amine from the lignin model monomer 3-(3,4-dimethoxyphenyl)-1-propanol and the actual lignin-derived monomers, (3-(4-hydroxyphenyl)-1-propanol and dihydroconiferyl alcohol), with dimethylamine. Various industrial metal catalysts were evaluated, resulting in nearly quantitative mass balances for most catalysts.

Selective Nickel-Catalyzed Hydrodeacetoxylation of Aryl Acetates.

Acetate serves as a renewable and easily installed leaving group for selective deoxygenation of phenolics (ArOH). Ni-catalyzed hydrodeacetoxylation of aryl acetates (Ar-OAc) with HBpin in a green carbonate solvent selectively delivers the corresponding deoxygenated arenes (ArH). The method is also applicable to highly challenging guaiacyl and syringyl acetates, leaving -OMe groups intact without arene reduction.

Lignin-First Monomers to Catechol: Rational Cleavage of C-O and C-C Bonds over Zeolites.

A catalytic route is developed to synthesize bio-renewable catechol from softwood-derived lignin-first monomers. This process concept consists of two steps: 1) O-demethylation of 4-n-propylguaiacol (4-PG) over acidic beta zeolites in hot pressurized liquid water delivering 4-n-propylcatechol (4-PC); 2) gas-phase C-dealkylation of 4-PC providing catechol and propylene over acidic ZSM-5 zeolites in the presence of water. With large pore sized beta-19 zeolite as catalyst, 4-PC is formed with more than 93 % selectivity at nearly full conversion of 4-PG.

Transient Directing Groups in Metal-Organic Cooperative Catalysis.

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing.

Expedient Synthesis of Bridged Bicyclic Nitrogen Scaffolds via Orthogonal Tandem Catalysis.

Bridged nitrogen bicyclic skeletons have been accessed via unprecedented site- and diastereoselective orthogonal tandem catalysis from readily accessible reactants in a step economic manner. Directed Pd-catalyzed γ-C(sp )-H olefination of aminocyclohexane with gem-dibromoalkenes, followed by a consecutive intramolecular Cu-catalyzed amidation of the 1-bromo-1-alkenylated product delivers the interesting normorphan skeleton. The tandem protocol can be applied on substituted aminocyclohexanes and aminoheterocycles, easily providing access to the corresponding substituted, aza- and oxa-analogues.

3-Substituted 2-isocyanopyridines as versatile convertible isocyanides for peptidomimetic design.

We report the use of 3-substituted 2-isocyanopyridines as convertible isocyanides in Ugi four-component reactions. The N-(3-substituted pyridin-2-yl)amide Ugi products can be cleaved by amines, alcohols, and water with Zn(OAc)2 as a catalyst. In addition, the applicability of the method was demonstrated in constrained di-/tripeptides bearing acid and base sensitive protective groups obtained via Ugi-4CR post-condensation modifications.

HFIP-mediated 2-aza-Cope rearrangement: metal-free synthesis of α-substituted homoallylamines at ambient temperature.

An efficient metal-free strategy for the synthesis of α-substituted homoallylamine derivatives has been developed via a 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-promoted 2-aza-Cope rearrangement of aldimines, generated in situ by condensation of aldehydes with easily accessible 1,1-diphenylhomoallylamines. This reaction provides rapid access to α-substituted homoallylamines with excellent functional group tolerance and yields. The reaction takes place at room temperature and no chromatographic purification is required for product isolation.

Homogeneous and heterogeneous catalysts for hydrogenation of CO to methanol under mild conditions.

In the context of a carbon neutral economy, catalytic CO hydrogenation to methanol is one crucial technology for CO mitigation providing solutions for manufacturing future fuels, chemicals, and materials. However, most of the presently known catalyst systems are used at temperatures over 220 °C, which limits the theoretical yield of methanol production due to the exothermic nature of this transformation. In this review, we summarize state-of-the-art catalysts, focusing on the rationales behind, for CO hydrogenation to methanol at temperatures lower than 170 °C.

Strecker-Derived Methodology for Library Synthesis of -Acylated α-Aminonitriles.

The Strecker reaction is a three-component condensation of an aldehyde, an amine, and hydrogen cyanide, delivering an α-amino carbonitrile. Despite extensive investigations, the possibility to use amides instead of amines as one of the three condensation partners has been largely neglected. Nonetheless, the -acylated α-aminocarbonitriles that are obtained in this way are of direct interest for drug discovery, because they make up a well-known class of mechanism-based inhibitors of serine- and cysteine-type hydrolases.

Recent Advances in Palladium-Catalyzed Isocyanide Insertions.

Isocyanides have long been known as versatile chemical reagents in organic synthesis. Their ambivalent nature also allows them to function as a CO-substitute in palladium-catalyzed cross couplings. Over the past decades, isocyanides have emerged as practical and versatile C building blocks, whose inherent -substitution allows for the rapid incorporation of nitrogeneous fragments in a wide variety of products.

C(sp)-H functionalization in non-aromatic azomethine-based heterocycles.

Direct C(sp2)-H functionalization of the endocyclic azomethine and aldonitrone moieties in non-aromatic azaheterocycles has established itself as a promising methodology over the last decade. Transition metal-catalyzed cross-coupling reactions, α-metalation-electrophile quenching protocols, and (metal-free) nucleophilic substitution of hydrogen reactions (SNH) are the major routes applied on cyclic imines and their derivatives. In this overview, we show the tangible progress made in this area during the period from 2008 to 2020.

Synthesis of Quinazolin-4-ones by Copper-Catalyzed Isocyanide Insertion.

Herein, we report a novel copper-catalyzed imidoylative cross-coupling/cyclocondensation reaction between 2-isocyanobenzoates and amines efficiently producing quinazolin-4-ones. The reaction utilizes Cu(II) acetate as an environmentally benign catalyst in combination with a mild base and proceeds well in anisole, a recommended, sustainable solvent. Additionally, the reaction does not require dry conditions or inert atmospheres for optimal performance.

Synthesis of Densely Functionalized Pyrimidouracils by Nickel(II)-Catalyzed Isocyanide Insertion.

A robust nickel-catalyzed oxidative isocyanide insertion/C-H amination by reaction of readily available -uracil-amidines with isocyanides affording polysubstituted pyrimidouracils has been reported. The reaction proceeds in moderate to quantitative yield, under mild conditions (i.e.

Brønsted Acid Catalyzed Tandem Defunctionalization of Biorenewable Ferulic acid and Derivates into Bio-Catechol.

An efficient conversion of biorenewable ferulic acid into bio-catechol has been developed. The transformation comprises two consecutive defunctionalizations of the substrate, that is, C-O (demethylation) and C-C (de-2-carboxyvinylation) bond cleavage, occurring in one step. The process only requires heating of ferulic acid with HCl (or H SO ) as catalyst in pressurized hot water (250 °C, 50 bar N ).

Directed C-H Functionalization Reactions with a Picolinamide Directing Group: Ni-Catalyzed Cleavage and Byproduct Recycling.

An efficient strategy for the cleavage of the picolinamide directing group (DG) and recycling of the byproduct generated has been developed. In this protocol, picolinamides were first Boc activated into tertiary -Boc--substituted picolinamides. These were then cleaved via a Ni-catalyzed esterification reaction with EtOH to give valuable -Boc protected amines.

Base Metal Catalyzed Isocyanide Insertions.

Isocyanides are diverse C building blocks considering their potential to react with nucleophiles, electrophiles, and radicals. Therefore, perhaps not surprisingly, isocyanides are highly valuable as inputs for multicomponent reactions (MCRs) and other one-pot cascade processes. In the field of organometallic chemistry, isocyanides typically serve as ligands for transition metals.