Chitosan microsphere-supported catalysts: design, synthesis and optimization for ethylene polymerization.

Polyolefins are the main building blocks for consumer products. Here, chitosan, a biopolymer that can be derived from abundant fishery waste, is shaped as a microspheroidal support using spray drying to facilitate ethylene polymerization. Definitive screening design was used to optimize synthesis steps efficiently.

γ-Stearolactone ring-opening by zeolites for the production of branched saturated fatty acids.

C branched saturated fatty acids (BSFA) are used as ingredients in cosmetics and lubricants and are produced the hydrogenation of C branched unsaturated fatty acids (BUFA). Industrial-grade C BUFA contain the odorous by-product γ-stearolactone (GSL), which must be removed by acid-catalysed ring-opening of GSL into oleic acid. Zeolites such as Y and beta can facilitate the ring-opening, but due to the dimensions of GSL the activity is expected to be limited by diffusion into the micropores.

Impact of Surface Enhanced Raman Spectroscopy in Catalysis.

Catalysis stands as an indispensable cornerstone of modern society, underpinning the production of over 80% of manufactured goods and driving over 90% of industrial chemical processes. As the demand for more efficient and sustainable processes grows, better catalysts are needed. Understanding the working principles of catalysts is key, and over the last 50 years, surface-enhanced Raman Spectroscopy (SERS) has become essential.

Da Vinci Project: Educating Sustainability Change-Makers with Transdisciplinary Challenge-Based Learning and Design Thinking.

Sustainability transitions need professionals with specific skills and attitudes that students often do not develop in their regular chemistry education. To foster sustainability change-maker competencies, we suggest augmenting higher education curricula, e.g.

Advancements in Assays for Micro- and Nanoplastic Detection: Paving the Way for Biomonitoring and Exposomics Studies.

Although plastic pollution and exposure to plastic-related compounds have received worldwide attention, health risks associated with micro- and nanoplastics (MNPs) are largely unknown. Emerging evidence suggests MNPs are present in human biofluids and tissue, including blood, breast milk, stool, lung tissue, and placenta; however, exposure assessment is limited and the extent of human exposure to MNPs is not well known. While there is a critical need to establish robust and scalable biomonitoring strategies to assess human exposure to MNPs and plastic-related chemicals, over 10,000 chemicals have been linked to plastic manufacturing with no existing standardized approaches to account for even a fraction of these exposures.

Catalytic Pyrolysis of Polyethylene with Microporous and Mesoporous Materials: Assessing Performance and Mechanistic Understanding.

Testing the catalytic performance for the catalytic pyrolysis of plastic waste is hampered by mass transfer limitations induced by a size mismatch between the catalyst's pores and the bulky polymer molecules. To investigate this aspect, the catalytic behaviour of a series of microporous and mesoporous materials was assessed in the catalytic pyrolysis of polyethylene (PE). More specifically, a mesoporous material, namely sulfated zirconia (Zr(SO)) on SBA-15, was synthesized to increase the pore accessibility, which reduces mass transfer limitations and thereby enables to better assess the effect of active site density on catalyst activity.

Surface-Activated Mechano-Catalysis for Ambient Conversion of Plastic Waste.

Improved recycling technologies can offer sustainable end-of-life options for plastic waste. While polyolefins can be converted into small hydrocarbons over acid catalysts at high temperatures, we demonstrate an alternative mechano-catalytic strategy at ambient conditions. The mechanism is fundamentally different from classical acidity-driven high-temperature approaches, exploiting mechanochemically generated radical intermediates.

Anchoring PdO clusters on defective alumina for improved catalytic methane oxidation.

Evolution of the Pd active centers in size and spatial distribution leads to an irreversible deactivation in many high-temperature catalytic processes. This research demonstrates the use of a defective alumina (AlO) as catalyst support to anchor Pd atoms and suppress the growth of Pd clusters in catalytic methane oxidation. A combination of operando spectroscopy and density functional theory (DFT) calculations provide insights into the evolution of Pd species and reveals distinct catalytic methane oxidation mechanisms on Pd single atoms, clusters, and nanoparticles (NPs).

The Coking of a Solid Catalyst Rationalized with Combined Raman and Fluorescence Lifetime Microscopy.

The formation of carbon deposits is a major deactivation pathway for solid catalysts. Studying coking on industrially relevant catalysts is, however, often challenging due to the sample heterogeneity. That is especially true for zeolite-containing catalysts where fluorescence often hampers their characterization with Raman spectroscopy.

Surface Carbon Formation and its Impact on Methane Dry Reforming Kinetics on Rhodium-Based Catalysts by Operando Raman Spectroscopy.

A mechanism for carbon deposition and its impact on the reaction kinetics of Methane Dry Reforming (MDR) using Rhodium-based catalysts is presented. By integrating Raman spectroscopy with kinetic analysis in an operando-annular chemical reactor under strict chemical conditions, we discovered that carbon deposition on a Rh/α-AlO catalyst follows a nucleation-growth mechanism. The dynamics of carbon aggregates at the surface is found to be ruled by the CO/CH ratio and the inlet CH concentration.

Molecular structure and composition elucidation of an industrial humin and its fractions.

Humins, (side-)products of the acid-catalysed dehydration of carbohydrates, will be produced in substantial quantities with the development of industrial biorefining processes. Most structural knowledge about such humins is based on synthetic model humins prepared at lab-scale from typical carbohydrate(-derived) compounds. Here, we report the first extensive characterisation study of an industrial humin.

Ethylene Polymerization over Metal-Organic Framework-Supported Zirconocene Complexes.

Metallocene immobilization onto a solid support helps to overcome the drawbacks of homogeneous metallocene complexes in the catalytic olefin polymerization. In this study, valuable insights have been obtained into the effects of pore size, linker composition, and surface groups of metal-organic frameworks (MOFs) on their role as support materials for metallocene-based ethylene polymerization catalysis. Three distinct Zn-based metal-organic frameworks (MOFs), namely, MOF-5, IRMOF-3, and ZIF-8, with different linkers have been activated with methylaluminoxane (MAO) and zirconocene complexes, followed by materials characterization and testing for ethylene polymerization.

Chitosan as Support Material for Metal-Organic Framework based Catalysts.

Turning waste into valuable products is one of the main challenges of the chemical industry. In this work, chitosan (CS), an abundant, low-cost, and non-toxic biopolymer derived from chitin, was reshaped into beads of ~3 mm. Their suitability as a support material for active phase catalyst materials was tested for a zirconium-based Metal-Organic Framework (MOF) with incorporated Pt, namely UiO-67-Pt.

The refinery of the future.

Fossil fuels-coal, oil and gas-supply most of the world's energy and also form the basis of many products essential for everyday life. Their use is the largest contributor to the carbon dioxide emissions that drive global climate change, prompting joint efforts to find renewable alternatives that might enable a carbon-neutral society by as early as 2050. There are clear paths for renewable electricity to replace fossil-fuel-based energy, but the transport fuels and chemicals produced in oil refineries will still be needed.

Correction: Unravelling potential reaction intermediates during catalytic pyrolysis of polypropylene with microscopy and spectroscopy.

[This corrects the article DOI: 10.1039/D3CY01473H.].

Alternative nano-lithographic tools for shell-isolated nanoparticle enhanced Raman spectroscopy substrates.

Chemically synthesized metal nanoparticles (MNPs) have been widely used as surface-enhanced Raman spectroscopy (SERS) substrates for monitoring catalytic reactions. In some applications, however, the SERS MNPs, besides being plasmonically active, can also be catalytically active and result in Raman signals from undesired side products. The MNPs are typically insulated with a thin (∼3 nm), in principle pin-hole-free shell to prevent this.

The Role of Water in Carbon Dioxide Adsorption in Porphyrinic Metal-Organic Frameworks.

Capturing and converting CO through artificial photosynthesis using photoactive, porous materials is a promising approach for addressing increasing CO concentrations. Porphyrinic Zr-based metal-organic frameworks (MOFs) are of particular interest as they incorporate a photosensitizer in the porous structure. Herein, the initial step of the artificial photosynthesis is studied: CO sorption and activation in the presence of water.

Unravelling potential reaction intermediates during catalytic pyrolysis of polypropylene with microscopy and spectroscopy.

While plastics-to-plastics recycling melting and re-extrusion is often the preferred option due to a relatively low CO footprint, this technique requires a highly sorted waste stream and plastic properties can often not be maintained. Obtaining aromatics, such as benzene, toluene, and xylene (BTX), catalytic pyrolysis of polyolefins, such as polypropylene and polyethylene, offers another attractive recycling technology. In this process, a discarded crude oil refinery catalyst (ECAT) was previously shown to lower the unwanted formation of deactivating coke species compared to a fresh crude oil refinery catalyst (FCC-cat), while yielding 20 wt% aromatics from polypropylene.

Green Additives in Chitosan-based Bioplastic Films: Long-term Stability Assessment and Aging Effects.

Although biomass-based alternatives for the manufacturing of bioplastic films are an important aspect of a more sustainable future, their physicochemical properties need to be able to compete with the existing market to establish them as a viable alternative. One important factor that is often neglected is the long-term stability of renewables-based functional materials, as they should neither degrade after a day or week, nor last forever. One material showing high potential in this regard, also due to its intrinsic biodegradability and antibacterial properties, is chitosan, which can form stable, self-standing films.

Molecular Accessibility and Diffusion of Resorufin in Zeolite Crystals.

Invited for the cover of this issue is the group of Professor Bert Weckhuysen at Utrecht University. The image depicts the change in fluorescence color of a resorufin dye molecule when it is protonated and confined inside the micropores of zeolite-β. Read the full text of the article at 10.

Fluorescent-Probe Characterization for Pore-Space Mapping with Single-Particle Tracking.

Porous solids often contain complex pore networks with pores of various sizes. Tracking individual fluorescent probes as they diffuse through porous materials can be used to characterize pore networks at tens of nanometers resolution. However, understanding the motion behavior of fluorescent probes in confinement is crucial to reliably derive pore network properties.

time-gated Raman spectroscopy of solid catalysts.

Raman spectroscopy is a powerful analytical tool to provide new insights in the working and deactivation principles of solid catalysts. Intense fluorescence can obscure Raman spectra to the extent that they become uninterpretable. Time-gated Raman spectroscopy, based on pulsed excitation and time-gated detection, suppresses background fluorescence based on its slower time dynamics compared to Raman scattering.

Oxidative Conversion of Polyethylene Towards Di-Carboxylic Acids: A Multi-Analytical Approach.

To reduce the pressure on the environment created by the increasing amount of plastic waste, the need to develop suitable plastic recycling methods has become more evident. However, the chemical recycling toolbox for polyethylene (PE), the most abundant type of plastic waste, remains underdeveloped. In this work, analytical methods were developed to explore the possibility to oxidatively convert PE into di-carboxylic acids as reaction products.