Mechanochemical degradation of per- and polyfluoroalkyl substances in soil using an industrial-scale horizontal ball mill with comparisons of key operational metrics.

Horizontal ball mills (HBMs) have been proven capable of remediating per- and polyfluoroalkyl substances (PFAS) in soil. Industrial-sized HBMs, which could easily be transported to impacted locations for on-site, ex-situ remediation, are readily available. This study examined PFAS degradation using an industrial-scale, 267 L cylinder HBM.

Insight into heat dissipation in fractured rock influenced by groundwater influx and heat source configurations using numerical analysis.

The characterization and evaluation of heat dissipation effects in fractured rock is becoming a priority topic with respect to the potential application of low-temperature thermal remediation in these settings. A three-dimensional numerical model was utilized to investigate heat dissipation-related thermo-hydrological processes in an upper fractured rock layer and a lower impermeable bedrock layer. To identify the factors controlling spatial temperature variances in the fractured rock layer accounting for a scaled heat source and variable groundwater flow, global sensitivity analyses were conducted on the variables using three categories: heat source, groundwater flow, and rock properties.

Elucidating the relationship between PFOA and PFOS destruction, particle size and electron generation in amended media commonly found in soils.

Ball milling has emerged as a promising destructive technique for treating per- and polyfluoroalkyl substances (PFAS)-impacted soils. Environmental media properties such as reactive species generated upon ball milling and particle size are postulated to influence the effectiveness of the technology. In this study, four media types amended with perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) were planetary ball milled to investigate destruction, fluoride recovery without additional co-milling reagents and the relationship between PFOA and PFOS destruction, particle size during milling, and electron generation.

Simulating field-scale thermal conductive heating with the potential for the migration and condensation of vapors.

Thermal conductive heating (TCH) is an in-situ thermal treatment (ISTT) technology for treating non-aqueous phase liquid (NAPL) source zones. Numerical models can be useful tools for improving remedial performance, but traditional multiphase flow models are rarely used to simulate mass recovery during ISTT applications at the field scale due to their computational expense. This study developed a 3D model based on macroscopic invasion percolation to simulate the vaporization of NAPL, and the subsequent vapor migration and potential condensation at the field scale.

Use of a horizontal ball mill to remediate per- and polyfluoroalkyl substances in soil.

There is a need for destructive technologies for per- and polyfluoroalkyl substances (PFAS) in soil. While planetary ball mill have been shown successful degradation of PFAS, there are issues surrounding scale up (maximum size is typically 0.5 L cylinders).

Removal of trichloroethene from thin clay lenses by electrical resistance heating: Laboratory experiments and the effects of gas saturation.

The removal of dissolved volatile organic compounds (VOCs) from low-permeability lenses is important to limit back diffusion at sites impacted by dense non-aqueous phase liquids (DNAPLs). In situ thermal treatment (ISTT) technologies have the potential to treat DNAPL-impacted sites by enhancing diffusion from low-permeability lenses during heating. A series of two-dimensional laboratory tank experiments was conducted to investigate heating, gas formation, and trichloroethene (TCE) removal from a clay lens surrounded by sand.

Mechanochemical remediation of perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) amended sand and aqueous film-forming foam (AFFF) impacted soil by planetary ball milling.

Per- and polyfluoroalkyl substances (PFAS) are manmade, fluorinated organic chemicals which have been identified as persistent organic pollutants. PFAS have surface active properties that have made them suitable for applications in oil- and water-resistant products, as well as many firefighting foams. No on-site remediation strategies exist to treat PFAS impacted soils.

Modelling gas-phase recovery of volatile organic compounds during in situ thermal treatment.

In situ thermal treatment (ISTT) technologies can be used to remove mass from non-aqueous phase liquid (NAPL) source zones. Ensuring the vaporization of NAPL and the capture of vapors are crucial, and numerical models are useful for understanding the processes that affect performance to help improve design and operation. In this paper, a two-dimensional model that combines a continuum approach based on finite difference for heat transfer with a macroscopic invasion percolation (macro-IP) approach for gas migration was developed to simulate thermal conductive heating (TCH) applications at the field-scale.

Low permeability zone remediation of trichloroethene via coupling electrokinetic migration with in situ electrochemical hydrodechlorination.

To address the challenge of trichloroethene (TCE) remediation in low permeability zone, an inexpensive Cu-Ni bimetallic cathode was proposed in electrokinetic (EK) remediation system to couple electrokinetic migration with in situ electrochemical hydrodechlorination. Aqueous phase TCE was originally added into the anolyte so that breakthrough curves through the low permeability porous soil compartment could be obtained to better understand TCE migration driven by electroosmosis flow using different cathodes. The Cu-Ni cathode resulted in more TCE migration of 7.

A numerical model for estimating the removal of volatile organic compounds in laboratory-scale treatability tests for thermal treatment of NAPL-impacted soils.

Treatability tests can be carried out to assess the potential effectiveness of thermal treatment technologies under different site conditions and are important for specific technology selection and design. In order to reduce the costs for laboratory tests and expand the insights from previous treatability studies, a one-dimensional (1D) radial finite difference model was developed to simulate the removal of volatile organic compounds (VOCs) in laboratory thermal treatability tests. The processes considered in the model include heat conduction, co-boiling of single-component or multi-component NAPLs with water, and water boiling.

Laboratory study of creosote removal from sand at elevated temperatures.

In situ thermal treatment (ISTT) technologies have been applied at sites impacted by non-aqueous phase liquids (NAPLs). There is a need to establish expectations for the treatment of semi-volatile NAPLs, including those consisting primarily of polycyclic aromatic hydrocarbons (PAHs), and the potential benefits and limitations of partial NAPL removal. A series of laboratory experiments was conducted to investigate NAPL removal and soil concentrations during the heating of creosote-impacted sand, as well as aqueous concentrations during post-heating dissolution.

Factors affecting gas migration and contaminant redistribution in heterogeneous porous media subject to electrical resistance heating.

A series of intermediate-scale laboratory experiments were completed in a two-dimensional flow cell to investigate gas production and migration during the application of electrical resistance heating (ERH) for the removal of dense non-aqueous phase liquids (DNAPLs). Experiments consisted of heating water in homogeneous silica sand and heating 270 mL of trichloroethene (TCE) and chloroform (CF) DNAPL pools in heterogeneous silica sands, both under flowing groundwater conditions. Spatial and temporal distributions of temperature were measured using thermocouples and observations of gas production and migration were collected using front-face image capture throughout the experiments.

Specification of matrix cleanup goals in fractured porous media.

Semianalytical transient solutions have been developed to evaluate what level of fractured porous media (e.g., bedrock or clay) matrix cleanup must be achieved in order to achieve compliance of fracture pore water concentrations within a specified time at specified locations of interest.

Hydraulic displacement of dense nonaqueous phase liquids for source zone stabilization.

Hydraulic displacement is a mass removal technology suitable for stabilization of a dense, nonaqueous phase liquid (DNAPL) source zone, where stabilization is defined as reducing DNAPL saturations and reducing the risk of future pool mobilization. High resolution three-dimensional multiphase flow simulations incorporating a spatially correlated, heterogeneous porous medium illustrate that hydraulic displacement results in an increase in the amount of residual DNAPL present, which in turn results in increased solute concentrations in groundwater, an increase in the rate of DNAPL dissolution, and an increase in the solute mass flux. A higher percentage of DNAPL recovery is associated with higher initial DNAPL release volumes, lower density DNAPLs, more heterogeneous porous media, and increased drawdown of groundwater at extraction wells.

Numerical modeling of thermal conductive heating in fractured bedrock.

Numerical modeling was employed to study the performance of thermal conductive heating (TCH) in fractured shale under a variety of hydrogeological conditions. Model results show that groundwater flow in fractures does not significantly affect the minimum treatment zone temperature, except near the beginning of heating or when groundwater influx is high. However, fracture and rock matrix properties can significantly influence the time necessary to remove all liquid water (i.

Plume detachment and recession times in fractured rock.

The influence of source zone concentration reduction on solute plume detachment and recession times in fractured rock was investigated using new semianalytical solutions to transient solute transport in the presence of advection, dispersion, sorption, matrix diffusion, and first-order decay. Novel aspects of these solutions are: (1) the source zone concentration behavior is simulated using a constant concentration with the option for either an instantaneous reduction to zero concentration or an exponentially decaying source zone concentration initiated at some time (t*) after the source is introduced, and (2) different biodegradation rates in the fracture and rock matrix. These solutions were applied for sandstone bedrock and revealed that biodegradation in the matrix, not the fracture, may be the most significant attenuation mechanism and therefore may dictate remediation time scales.

Concentration rebound following in situ chemical oxidation in fractured clay.

A two-dimensional, transient-flow, and transport numerical model was developed to simulate in situ chemical oxidation (ISCO) of trichloroethylene and tetrachloroethylene by potassium permanganate in fractured clay. This computer model incorporates dense, nonaqueous phase liquid dissolution, reactive aquifer material, multispecies matrix diffusion, and kinetic formulations for the oxidation reactions. A sensitivity analysis for two types of parameters, hydrogeological and engineering, including matrix porosity, matrix organic carbon, fracture aperture, potassium permanganate dosage, and hydraulic gradient, was conducted.

Time scales of DNAPL migration in sandy aquifers examined via numerical simulation.

The time required for dense nonaqueous phase liquid (DNAPL) to cease migrating following release to the subsurface is a valuable component of a site conceptual model. This study uses numerical simulation to investigate the migration of six different DNAPLs in sandy aquifers. The most influential parameters governing migration cessation time are the density and viscosity of the DNAPL and the mean hydraulic conductivity of the aquifer.

On the use and error of approximation in the Domenico (1987) solution.

A mathematical solution for solute transport in a three-dimensional porous medium with a patch source under steady-state, uniform ground water flow conditions was developed by Domenico (1987). The solution derivation strategy used an approximate approach to solve the boundary value problem, resulting in a nonexact solution. Variations of the Domenico (1987) solution are incorporated into the software programs BIOSCREEN and BIOCHLOR, which are frequently used to evaluate subsurface contaminant transport problems.

Multidimensional validation of a numerical model for simulating a DNAPL release in heterogeneous porous media.

A fixed-volume release of 1,2-DCE, tracked in space and time with a light transmission/image analysis system, provided a data set for the infiltration, redistribution, and immobilisation of a dense non-aqueous phase liquid (DNAPL) in a heterogeneous porous medium. The two-dimensional bench scale flow cell was packed with a spatially correlated, random heterogeneous distribution of six sand types. In order to provide the necessary modelling parameters, detailed constitutive relationships were measured at the local scale for the six sands.

Matrix diffusion-derived plume attenuation in fractured bedrock.

Matrix diffusion can attenuate the rate of plume migration in fractured bedrock relative to the rate of ground water flow for both conservative and nonconservative solutes of interest. In a system of parallel, equally spaced constant aperture fractures subject to steady-state ground water flow and an infinite source width, the degree of plume attenuation increases with time and travel distance, eventually reaching an asymptotic level. The asymptotic degree of plume attenuation in the absence of degradation can be predicted by a plume attenuation factor, beta, which is readily estimated as R' (phi(m)/phi(f)), where R' is the retardation factor in the matrix, phi(m) is the matrix porosity, and phi(f) is the fracture porosity.

Formation and stability of polychlorinated biphenyl Pickering emulsions.

An emulsion stabilized by colloidal suspensions of finely divided solids is known as a Pickering emulsion. The potential for polychlorinated biphenyls (PCBs) to form Pickering emulsions ex situ when in contact with powdered solids, such as clays and metal oxides, is investigated here. Bentonite, iron oxide and magnesium oxide dispersions proved to be robust Pickering emulsion stabilizers, whereas manganese oxide dispersions were not.

The influence of high initial concentration aqueous-phase TCE on the performance of iron wall systems.

Flow-through column tests were conducted to investigate the performance of iron wall remediation systems for the degradation of aqueous-phase trichloroethylene (TCE). Concentration profiles under steady-state transport conditions were generated by measuring TCE concentrations at sample ports located at various locations along the length of the column. The results indicated that a pseudo-first-order model is adequate at describing degradation kinetics for low initial TCE concentrations, but not for higher initial concentrations.

Multiphase flow and transport through fractured heterogeneous porous media.

The migration of Dense, Non-Aqueous Phase Liquid (DNAPL) and dissolved phase contamination through a fractured heterogeneous porous medium has been investigated through the use of a multiphase compositional model. The sensitivity of the timescales of migration and the distribution of contaminant in the subsurface to the mean permeability, the variance of the permeability, and the degree of fracturing of the domain were examined. It was found that increasing the mean permeability of the domain allowed the DNAPL to penetrate deeper into the subsurface, while decreasing the mean permeability caused the DNAPL to pool at shallower depths.