Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying.

Surface functionalization is an effective approach to change the surface properties of a material to achieve a specific goal such as improving the biocompatibility of the material. Here, the surface of the commercial biomedical Ti-6Al-7Nb alloy was functionalized through synthesizing of a porous surface layer by liquid metal dealloying (LMD). During LMD, the Ti-6Al-7Nb alloy is immersed in liquid magnesium (Mg) and both materials react with each other.

Proteome analysis of human mesenchymal stem cells undergoing chondrogenesis when exposed to the products of various magnesium-based materials degradation.

Treatment of physeal fractures (15%-30% of all paediatric fractures) remains a challenge as in approximately 10% of the cases, significant growth disturbance may occur. Bioresorbable Magnesium-based implants represent a strategy to minimize damage (., load support until bone healing without second surgery).

Understanding Protein Networks Using Vester's Sensitivity Model.

Magnesium-based biomaterials belong to the third generation of biomaterials that are also bioactive. These smart materials combine bioactivity and biodegradability, and elicit specific cellular responses at the molecular level. In fact, osteoinductive properties have been observed in mesenchymal stem cells in the presence of Magnesium.

Influence of the Microstructure and Silver Content on Degradation, Cytocompatibility, and Antibacterial Properties of Magnesium-Silver Alloys In Vitro.

Implantation is a frequent procedure in orthopedic surgery, particularly in the aging population. However, it possesses the risk of infection and biofilm formation at the surgical site. This can cause unnecessary suffering to patients and burden on the healthcare system.

Chondrogenic differentiation of ATDC5-cells under the influence of Mg and Mg alloy degradation.

Biodegradable magnesium (Mg)-based materials are a potential alternative to permanent implants for application in children. Nevertheless effects of those materials on growth plate cartilage and chondrogenesis have not been previously evaluated. In vitro differentiation of ATDC5 cells was evaluated under the influence of pure Mg (PMg), Mg with 10wt% of gadolinium (Mg-10Gd) and Mg with 2wt% of silver (Mg-2Ag) degradation products (extracts) and direct cell culture on the materials.

Proteomic profile of mouse fibroblasts exposed to pure magnesium extract.

Magnesium and its alloys gain wide attention as degradable biomaterials. In order to reveal the molecular mechanism of the influence of biodegradable magnesium on cells, proteomics analysis was performed in this work. After mouse fibroblasts (L929) were cultured with or without Mg degradation products (Mg-extract) for 8, 24, and 48h, changes in protein expression profiles were obtained using isobaric tags for relative and absolute quantitation (iTRAQ) coupled two dimensional liquid chromatography-tandem mass spectrometry (2D LC MS/MS).

The Degradation Interface of Magnesium Based Alloys in Direct Contact with Human Primary Osteoblast Cells.

Magnesium alloys have been identified as a new generation material of orthopaedic implants. In vitro setups mimicking physiological conditions are promising for material / degradation analysis prior to in vivo studies however the direct influence of cell on the degradation mechanism has never been investigated. For the first time, the direct, active, influence of human primary osteoblasts on magnesium-based materials (pure magnesium, Mg-2Ag and Mg-10Gd alloys) is studied for up to 14 days.

Influence of Magnesium Alloy Degradation on Undifferentiated Human Cells.

Background: Magnesium alloys are of particular interest in medical science since they provide compatible mechanical properties with those of the cortical bone and, depending on the alloying elements, they have the capability to tailor the degradation rate in physiological conditions, providing alternative bioresorbable materials for bone applications. The present study investigates the in vitro short-term response of human undifferentiated cells on three magnesium alloys and high-purity magnesium (Mg).

Materials And Methods: The degradation parameters of magnesium-silver (Mg2Ag), magnesium-gadolinium (Mg10Gd) and magnesium-rare-earth (Mg4Y3RE) alloys were analysed after 1, 2, and 3 days of incubation in cell culture medium under cell culture condition.

Effects of extracellular magnesium extract on the proliferation and differentiation of human osteoblasts and osteoclasts in coculture.

Unlabelled: Coculture of osteoblasts and osteoclasts is a subject of interest in the understanding of how magnesium (Mg)-based implants influence the bone metabolism and remodeling upon degradation. Human telomerase reverse transcriptase (hTERT) transduced mesenchymal stem cells (SCP-1) were first differentiated into osteoblasts with osteogenic supplements and then further cocultured with peripheral blood mononucleated cells (PBMC) without the addition of osteoclastogenesis promoting factors. Concomitantly, the cultures were exposed to variable Mg extract dilutions (0, 30×, 10×, 5×, 3×, 2× and 1×).

Effects of magnesium degradation products on mesenchymal stem cell fate and osteoblastogenesis.

The unique properties of magnesium (Mg) and its alloys that combine favourable mechanical properties, biocompatibility, and biodegradability, which until now have been restricted primarily to polymers, justify its study in the field of implantology. Previous in vivo studies have underlined the possible osteoconductive effects of Mg-based metals, and several in vitro studies have highlighted positive effects of Mg-enriched biomaterials. However, although the observed biological activity of magnesium is intriguing, it remains largely unexplored.

Magnesium-based implants: a mini-review.

The goal of this review is to bring to the attention of the readership of Magnesium Research another facet of the importance of magnesium, i.e. magnesium-based biomaterials.

Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review.

Due to their biodegradability, magnesium and magnesium-based alloys could represent the third generation of biomaterials. However, their mechanical properties and time of degradation have to match the needs of applications. Several approaches, such as choice of alloying elements or tailored microstructure, are employed to tailor corrosion behaviour.

Comparison of the reaction of bone-derived cells to enhanced MgCl2-salt concentrations.

Magnesium-based implants exhibit various advantages such as biodegradability and potential for enhanced in vivo bone formation. However, the cellular mechanisms behind this possible osteoconductivity remain unclear. To determine whether high local magnesium concentrations can be osteoconductive and exclude other environmental factors that occur during the degradation of magnesium implants, magnesium salt (MgCl2) was used as a model system.

A Porous TiAl6V4 Implant Material for Medical Application.

Increased durability of permanent TiAl6V4 implants still remains a requirement for the patient's well-being. One way to achieve a better bone-material connection is to enable bone "ingrowth" into the implant. Therefore, a new porous TiAl6V4 material was produced via metal injection moulding (MIM).

Phosphatidylethanolamine biomimetic coating increases mesenchymal stem cell osteoblastogenesis.

Previous observations (e.g., decreased bacterial adhesion) have shed the light on the auspicious possibility to use phosphatidylethanolamine as biomimetic coating for metal implants.

Mixture of nonionic/ionic surfactants for the formulation of nanostructured lipid carriers: effects on physical properties.

The objective of the present work was to investigate the effects of the mixture of nonionic/ionic surfactants on nanostructured lipid carriers (NLCs). Nonionic surfactant (polyethylene-poly(propylene glycol), Pluronic F68) and ionic surfactant (octenylsuccinic acid modified gum arabic, GA-OSA) were chosen as emulsifier for NLCs. The NLCs systems, which were composed of lipid matrix, modified 4-dedimethylaminosancycline (CMT-8), and various emulsifier agents, were characterized with dynamic light scattering (DLS), high performance liquid chromatography (HPLC), transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), in vitro release, and phagocytosis assay.

X-ray and neutron investigation of self-assembled lipid layers on a titanium surface.

Titanium is the most widely preferred metal material for bone reconstruction in orthopedics and dentistry. To improve its biological performance, various coatings can be applied. In this investigation, a biomimetic coating on a model implant surface was studied in X-ray and neutron reflectivity experiments to probe the quality of this coating, which is only few nanometers thick.

Effects of extracellular magnesium on the differentiation and function of human osteoclasts.

Magnesium-based implants have been shown to influence the surrounding bone structure. In an attempt to partially reveal the cellular mechanisms involved in the remodelling of magnesium-based implants, the influence of increased extracellular magnesium content on human osteoclasts was studied. Peripheral blood mononuclear cells were driven towards an osteoclastogenesis pathway via stimulation with receptor activator of nuclear factor kappa-B ligand and macrophage colony-stimulating factor for 28 days.

Examination of the inflammatory response following implantation of titanium plates coated with phospholipids in rats.

Implantation of biomaterials like titanium (Ti) causes inflammatory reactions possibly affecting implant functionality. Surface modifications could improve biocompatibility and functionality of implants. Biomembrane-derived phospholipids might be useful as implant coating due to their biomimetic properties.

Toll-like receptors are part of the innate immune defense system of sponges (demospongiae: Porifera).

During evolution and with the emergence of multicellular animals, the need arose to ward off foreign organisms that threaten the integrity of the animal body. Among many different receptors that participate in the recognition of microbial invaders, toll-like receptors (TLRs) play an essential role in mediating the innate immune response. After binding distinct microbial components, TLRs activate intracellular signaling cascades that result in an induced expression of diverse antimicrobial molecules.

Axial (apical-basal) expression of pro-apoptotic and pro-survival genes in the lake baikal demosponge Lubomirskia baicalensis.

Like in all other Metazoa, also in sponges (Porifera) proliferation, differentiation, and death of cells are controlled by apoptotic processes, thus allowing the establishment of a Bauplan (body plan). The demosponge Lubomirskia baicalensis from the Lake Baikal is especially suitable to assess the role of the apoptotic molecules, since its grade of construction is highly elaborated into an encrusting base and branches composed of modules lined up along the apical-basal axis. The four cDNAs, ALG-2, BAK, MA-3, and Bcl-2, were isolated from this sponge species.