Miscibility of Non-Uniform Aliphatic Polyamide Mixtures.

Mixing different aliphatic polyamides provides opportunities to tune and optimize the properties of these semicrystalline polycondensates. Combining experiment and theory, we predict and explain the miscibility of aliphatic polyamide mixtures. Visual inspection and Raman spectroscopy of polyamide mixtures show that liquid/liquid phase demixing occurs in the melt due to limited miscibility.

Dampened Transient Actuation of Hydrogels Autonomously Controlled by pH-Responsive Bicontinuous Nanospheres.

The fabrication of a soft actuator with a dampened actuation response is presented. This was achieved via the incorporation into an actuating hydrogel of urease-loaded pH-responsive bicontinuous nanospheres (BCNs), whose membrane was able to regulate the permeability and thus conversion of fuel urea into ammonia. The dampened response of these nanoreactors to the enzymatically induced pH change was translated to a pH-responsive soft actuator.

RNA-inspired phosphate diester dynamic covalent networks.

Neighboring group assisted rearrangement substantially increases relaxation rates in dynamic covalent networks, allowing easier (re)processing of these materials. In this work, we introduce a dynamic covalent network with anionic phosphate diesters as the sole dynamic group, incorporating β-hydroxy groups as a neighboring group, mimicking the self-cleaving backbone structure of RNA. The diester-based networks have slightly slower dynamics, but significantly better hydrolytic (and thermal) stability than analogous phosphate triester-based networks.

Benzene Tetraamide: A Covalent Supramolecular Dual Motif in Dynamic Covalent Polymer Networks.

In dynamic polyamide networks, 1,2,4,5-benzene tetraamide (B4A) units act simultaneously as a dynamic covalent cross-linker and as supramolecular stacking motif. This results in materials with a rubbery plateau modulus that is about 20 times higher than that of a corresponding reference network in which the supramolecular interaction is suppressed. In branched polyamides with the same B4A dynamic motif, hydrogen bonding and stacking lead to strong and reversible supramolecular networks, whereas a branched polyamide with the nonstacking reference linker is a viscous liquid under the same conditions.

Investigating the Morphology and Mechanics of Biogenic Hierarchical Materials at and below Micrometer Scale.

Investigating and understanding the intrinsic material properties of biogenic materials, which have evolved over millions of years into admirable structures with difficult to mimic hierarchical levels, holds the potential of replacing trial-and-error-based materials optimization in our efforts to make synthetic materials of similarly advanced complexity and properties. An excellent example is biogenic silica which is found in the exoskeleton of unicellular photosynthetic algae termed diatoms. Because of the complex micro- and nanostructures found in their exoskeleton, determining the intrinsic mechanical properties of biosilica in diatoms has only partly been accomplished.

Chain length of bioinspired polyamines affects size and condensation of monodisperse silica particles.

Polyamines play a major role in biosilicification reactions in diatoms and sponges. While the effects of polyamines on silicic acid oligomerization and precipitation are well known, the impact of polyamines chain length on silica particle growth is unclear. We studied the effects of polyamine chain length on silica particle growth and condensation in a known, simple, and salt-free biphasic reaction system; with tetraethyl orthosilicate as organic phase and polyamine dissolved in the aqueous phase.

Dynamic Polyamide Networks via Amide-Imide Exchange.

The diamide-imide equilibrium was successfully exploited for the synthesis of dynamic covalent polymer networks in which a dissociative bond exchange mechanism leads to high processibility at temperatures above ≈110 °C. Dynamic covalent networks bridge the gap between thermosets and thermoplastic polymers. At the operating temperature, when the network is fixed, dynamic covalent networks are elastic solids, while at high temperatures, chemical exchange reactions turn the network into a processible viscoelastic material.

Efficient Exchange in a Bioinspired Dynamic Covalent Polymer Network via a Cyclic Phosphate Triester Intermediate.

Bond exchange via neighboring group-assisted reactions in dynamic covalent networks results in efficient mechanical relaxation. In Nature, the high reactivity of RNA toward nucleophilic substitution is largely attributed to the formation of a cyclic phosphate ester intermediate via neighboring group participation. We took inspiration from RNA to develop a dynamic covalent network based on β-hydroxyl-mediated transesterifications of hydroxyethyl phosphate triesters.

Phosphate Triester Dynamic Covalent Networks.

Dynamic covalent networks are a class of polymeric materials that combine the merits of classical thermosets and thermoplastics, in terms of mechanical properties and reprocessability, in one material. Various dynamic covalent chemistries have thus been implemented in polymeric materials with recent interests shifting toward chemistries that would allow rearrangements in network topology without the aid of external catalysts. Here we introduce transesterification in phosphate triesters as a new dynamic covalent chemistry in polymeric networks.

Modifying the thickness, pore size, and composition of diatom frustule in Pinnularia sp. with Al ions.

Diatoms are unicellular photosynthetic algae that produce a silica exoskeleton (frustule) which exposes a highly ordered nano to micro scale morphology. In recent years there has been a growing interest in modifying diatom frustules for technological applications. This is achieved by adding non-essential metals to the growth medium of diatoms which in turn modifies morphology, composition, and resulting properties of the frustule.

Revealing structural evolution occurring from photo-initiated polymer network formation.

Photopolymerization is a key enabling technology offering spatial and temporal control to allow for future functional materials to be made to meet societal needs. However, gaining access to robust experimental techniques to describe the evolution of nanoscale morphology in photo-initiated polymeric systems has proven so far to be a challenging task. Here, we show that these physical transformations can be monitored and quantified at the nanoscale in situ and in real-time.

Intramolecularly Catalyzed Dynamic Polyester Networks Using Neighboring Carboxylic and Sulfonic Acid Groups.

Dynamic covalent bonds in a polymer network lead to plasticity, reshapability, and potential recyclability at elevated temperatures in combination with solvent-resistance and better dimensional stability at lower temperatures. Here we report a simple one-step procedure for the catalyst-free preparation and intramolecularly catalyzed stress-relaxation of dynamic polyester networks. The procedure is based on the coupling of branched OH-end functional polyesters (functionality ≥ 3) by pyromellitic dianhydride (PMDA) or 2,5-bis(methoxy-carbonyl) benzenesulfonic acid resulting in ester linkages with, respectively, a COOH or a SOH group in a position to the ester bond.

Water Swelling Behavior of Poly(ethylene glycol)-Based Polyurethane Networks.

Defects in a polymer network complicate an accurate calculation of structural parameters such as the molar mass between cross-links , typically obtained from experimental swelling data. In this paper the formation and structure of poly(ethylene glycol) (PEG)-based polyurethane networks containing PEG-mono methyl ether dangling chains are studied. The phantom network model can describe the swelling behavior of these networks only when a composition-dependent interaction parameter is used and the formation of allophanates is accounted for.

t-Butyl-Oxycarbonylated Diamines as Building Blocks for Isocyanate-Free Polyurethane/Urea Dispersions and Coatings.

t-Butyl-oxycarbonylated diamines ("di-Boc-carbamates") are investigated as dicarbamate monomers for diamine/dicarbamate polymerizations. Polyureas (PUs) and polyurethanes (PURs) with high molecular weights are prepared from stoichiometric polymerizations of diamines or diols with N-N'-di-t-butyl-oxycarbonyl isophorone diamine (DiBoc-IPDC) using KOt-Bu as a catalyst, while gelation is observed when an excess of DiBoc-IPDC is used with respect to the diamines or diols. Stable dispersions are obtained from PUs and PURs with 3,3'-diamino-N-methyldipropylamine (DMDPA) as internal dispersing agent.

Isocyanate-Free Approach to Water-Borne Polyurea Dispersions and Coatings.

Here, an isocyanate-free approach to produce polyureas from diamines and dicarbamates as monomers is reported. A side reaction limiting the molecular weight during the diamine/ dicarbamate polymerization, that is, N-alkylation of amine end groups, is investigated. Mitigation of the N-alkylation, either by enhancing the carbamate aminolysis rate or by substitution of dimethylcarbamates with more sterically hindered diethylcarbamates, affords polyureas with sufficiently high molecular weights to assure satisfactory mechanical properties.

Unique Base-Initiated Depolymerization of Limonene-Derived Polycarbonates.

The depolymerization of poly(limonene carbonate) (PLC) initiated by 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) was investigated.

Kinetic Monte Carlo simulation of the photodegradation process of polyester-urethane coatings.

A numerical method to simulate reactions in a cross-linked polymer is developed and applied to the photodegradation process of polyester-urethane clearcoats during artificial exposure in a Weather-Ometer. This coarse-grained simulation method, which is based on a kinetic Monte Carlo scheme, is verified with experimental data on the depth-resolved changes in optical properties and chemical composition that have been previously determined. By modelling the depth-dependency of physical processes that occur in the coating, such as the absorption of photons and the diffusion of oxygen, the experimentally observed evolution of depth gradients in chemical composition can be well described by the simulation.

Graphene oxide single sheets as substrates for high resolution cryoTEM.

CryoTEM is an important tool in the analysis of soft matter, where generally defocus conditions are used to enhance the contrast in the images, but this is at the expense of the maximum resolution that can be obtained. Here, we demonstrate the use of graphene oxide single sheets as support for the formation of 10 nm thin films for high resolution cryoTEM imaging, using DNA as an example. With this procedure, the overlap of objects in the vitrified film is avoided.

Self-replenishing ability of cross-linked low surface energy polymer films investigated by a complementary experimental-simulation approach.

Nowadays, many self-healing strategies are available for recovering mechanical damage of bulk polymeric materials. The recovery of surface-dependent functionalities on polymer films is, however, equally important and has been less investigated. In this work we study the ability of low surface energy cross-linked poly(ester urethane) networks containing perfluorinated dangling chains to self-replenish their surface, after being submitted to repeated surface damage.

Nucleation and growth of monodisperse silica nanoparticles.

Although monodisperse amorphous silica nanoparticles have been widely investigated, their formation mechanism is still a topic of debate. Here, we demonstrate the formation of monodisperse nanoparticles from colloidally stabilized primary particles, which at a critical concentration undergo a concerted association process, concomitant with a morphological and structural collapse. The formed assemblies grow further by addition of primary particles onto their surface.

Self-replenishing surfaces.

Damaged surfaces self-replenish their chemical composition by the spontaneous re-orientation of functional groups chemically bonded to the polymer network. The repair of the surface chemistry leads to the recovery of surface functionality. This self-replenishing approach is suitable to recover many surface-related properties and constitutes a major breakthrough in extending the service life-time of functional materials.

Thermal design and turbidity sensor for autonomous bacterial growth measurements in spaceflight.

For application of biological air filters in manned spacecraft, research on bacterial growth is carried out under microgravity conditions. For the BIOFILTER experiment, flown in 2005 on FOTON M2, eight turbidity sensors to measure the growth rate of the bacterium Xanthobacter autotrophicus GJ10 were used. Also thermal management provisions were implemented to control the internal temperature.