AI-optimised tuneable sources for bandwidth-scalable, sub-nanosecond wavelength switching.

Wavelength routed optical switching promises low power and latency networking for data centres, but requires a wideband wavelength tuneable source (WTS) capable of sub-nanosecond switching at every node. We propose a hybrid WTS that uses time-interleaved tuneable lasers, each gated by a semiconductor optical amplifier, where the performance of each device is optimised using artificial intelligence. Through simulation and experiment we demonstrate record wavelength switch times below 900 ps across 6.

Photonic lantern broadband orbital angular momentum mode multiplexer.

Optical vortex beams that carry orbital angular momentum (OAM), also known as OAM modes, have attracted considerable interest in recent years as they can comprise an additional degree of freedom for a variety of advanced classical and quantum optical applications. While canonical methods of OAM mode generation are effective, a method that can simultaneously generate and multiplex OAM modes with low loss and over broad spectral range is still in great demand. Here, via novel design of an optical fiber device referred to as a photonic lantern, where the radial mode index ("m") is neglected, for the first time we demonstrate the simultaneous generation and multiplexing of OAM modes with low loss and over the broadest spectral range to date (550 nm).

Investigation of bandwidth loading in optical fibre transmission using amplified spontaneous emission noise.

The use of spectrally shaped amplified spontaneous emission noise (SS-ASE) as a method for emulating interfering channels in optical fibre transmission systems has been studied. It is shown that the use of SS-ASE leads to a slightly pessimistic performance relative to the use of conventionally modulated interfering channels in the nonlinear regime. The additional nonlinear interference noise (on the channel under test), due to the Gaussian nature of SS-ASE, has been calculated using a combination of the Gaussian noise (GN) and enhanced GN (EGN) models for the entire C-band (4.

Comparison of digital signal-signal beat interference compensation techniques in direct-detection subcarrier modulation systems.

Single-polarization direct-detection transceivers may offer advantages compared to digital coherent technology for some metro, back-haul, access and inter-data center applications since they offer low-cost and complexity solutions. However, a direct-detection receiver introduces nonlinearity upon photo detection, since it is a square-law device, which results in signal distortion due to signal-signal beat interference (SSBI). Consequently, it is desirable to develop effective and low-cost SSBI compensation techniques to improve the performance of such transceivers.

High spectral density transmission emulation using amplified spontaneous emission noise.

We demonstrate the use of spectrally shaped amplified spontaneous emission (SS-ASE) noise for wideband channel loading in the investigation of nonlinear transmission limits in wavelength-division multiplexing transmission experiments using Nyquist-spaced channels. The validity of this approach is explored through statistical analysis and experimental transmission of Nyquist-spaced 10 GBaud polarization-division multiplexing (PDM) quadrature phase-shift keying and PDM-16-ary quadrature amplitude modulation (QAM) channels, co-propagated with SS-ASE over single mode fiber. It is shown that this technique, which is simpler to implement than a fully modulated comb of channels, is valid for distances exceeding 240 km for PDM-16QAM with dispersion of 16 ps/nm/km, yields a good agreement with theory, and provides a conservative measure of system performance.

Cyclostationarity-based joint monitoring of symbol-rate, frequency offset, CD and OSNR for Nyquist WDM superchannels.

Software-defined transceivers can be reconfigured based on demand and existing channel impairments, and as such, monitoring of both signal and channel parameters is necessary. We demonstrate a novel joint estimation method suitable for spectrally efficient Nyquist wavelength-division multiplexing (WDM), based on the cyclostationary property of linearly modulated signals, exploited both in the frequency and time domains. Using a Nyquist superchannel composed of three 10 GBaud channels, we experimentally demonstrate the simultaneous monitoring of symbol-rate with 100% accuracy, roll-off, frequency offset (FO), chromatic dispersion (CD) and optical signal-to-noise ratio (OSNR) with root-mean-square errors (RMSE) of 20%, 4 MHz, 200 ps/nm and 1.

Signal-signal beat interference cancellation in spectrally-efficient WDM direct-detection Nyquist-pulse-shaped 16-QAM subcarrier modulation.

An experimental demonstration of direct-detection single-sideband Nyquist-pulse-shaped 16-QAM subcarrier modulated (Nyquist-SCM) transmission implementing a receiver-based signal-signal beat interference (SSBI) cancellation technique is described. The performance improvement with SSBI mitigation, which compensates for the nonlinear distortion caused by square-law detection, was quantified by simulations and experiments for a 7 × 25 Gb/s WDM Nyquist-SCM signal with a net optical information spectral density (ISD) of 2.0 (b/s)/Hz.

Equalization enhanced phase noise in Nyquist-spaced superchannel transmission systems using multi-channel digital back-propagation.

Superchannel transmission spaced at the symbol rate, known as Nyquist spacing, has been demonstrated for effectively maximizing the optical communication channel capacity and spectral efficiency. However, the achievable capacity and reach of transmission systems using advanced modulation formats are affected by fibre nonlinearities and equalization enhanced phase noise (EEPN). Fibre nonlinearities can be effectively compensated using digital back-propagation (DBP).

Unrepeatered Nyquist PDM-16QAM transmission over 364 km using Raman amplification and multi-channel digital back-propagation.

Transmission of a net 467-Gb/s PDM-16QAM Nyquist-spaced superchannel is reported with an intra-superchannel net spectral efficiency (SE) of 6.6 (b/s)/Hz, over 364-km SMF-28 ULL ultra-low loss optical fiber, enabled by bi-directional second-order Raman amplification and digital nonlinearity compensation. Multi-channel digital back-propagation (MC-DBP) was applied to compensate for nonlinear interference; an improvement of 2 dB in Q(2) factor was achieved when 70-GHz DBP bandwidth was applied, allowing an increase in span length of 37 km.

Spectrally shaped DP-16QAM super-channel transmission with multi-channel digital back-propagation.

The achievable transmission capacity of conventional optical fibre communication systems is limited by nonlinear distortions due to the Kerr effect and the difficulty in modulating the optical field to effectively use the available fibre bandwidth. In order to achieve a high information spectral density (ISD), while simultaneously maintaining transmission reach, multi-channel fibre nonlinearity compensation and spectrally efficient data encoding must be utilised. In this work, we use a single coherent super-receiver to simultaneously receive a DP-16QAM super-channel, consisting of seven spectrally shaped 10GBd sub-carriers spaced at the Nyquist frequency.

Estimating divergently routed nonlinearly interfering channel powers using cross phase modulation.

The deployment of coherent transceivers in legacy networks requires significant investment in installation. We propose a method enabling autonomous (re-)configuration of an optical channel, which would be advantageous in legacy networks and necessary in proposed future networks utilizing a flexible frequency grid and software defined components such as reconfigurable optical add drop multiplexers (ROADM). We consider potential interfering optical channels propagating with the prospective channel along part of the fiber link which are dropped before arrival at the receiver.

Gain-switched multicarrier transmitter in a long-reach UDWDM PON with a digital coherent receiver.

The authors report on the downlink performance of a 10 Gb/s long-reach and ultra-dense wavelength-division multiplexed passive optical network, based on a multicarrier transmitter realized by using an externally injected gain-switched distributed-feedback laser diode. Each of the comb channels, spaced by 10 GHz, is modulated with a 3 Gbaud dual polarization quadrature phase shift keying signal that included a 20% overhead for forward error correction. Frequency selectivity and enhanced receiver sensitivity is achieved by employing a digital coherent receiver to receive the signal.

Burst Mode Receiver for 112 Gb/s DP-QPSK with parallel DSP.

A burst mode 112 Gb/s DP-QPSK digital coherent optical receiver with parallel DSP suitable for implementation in a CMOS ASIC with a 218.75 MHz clock speed is presented. The receiver performance is validated in a five channel 50 GHz grid WDM burst switching experiment using a commercially available wavelength tunable laser as the local oscillator.

Estimating OSNR of equalised QPSK signals.

We propose and demonstrate a technique to estimate the OSNR of an equalised QPSK signal based on the radial moments of the complex signal constellation. The technique is compared through simulation with maximum likelihood estimation and the effect of the block size used in the estimation is also assessed. The technique is verified experimentally and when combined with a single point calibration the OSNR of the input signal was estimated to within 0.

Ultra-long-haul transmission of 7×42.9 Gbit/s PS-QPSK and PDM-BPSK.

We investigated ultra-long-haul transmission of polarization-switched QPSK (PS-QPSK) and polarization-division-multiplexed BPSK (PDM-BPSK) at 42.9 Gbit/s experimentally as well as by means of computer simulations. PDM-BPSK allowed transmission distances in excess of 14,040 km to be achieved, compared to 13,640 km for PS-QPSK.

Dynamic linewidth measurement technique using digital intradyne coherent receivers.

The phase noise characteristics and laser stabilization time of a tunable laser under both static and fast switching operation is characterized using a dynamic linewidth measurement technique which employs a digital intradyne coherent receiver. The measurement technique utilizes a time domain frequency estimator to characterize the laser phase noise and also analyses the separate noise contributions to the overall laser linewidth. The performance of the measurement technique is validated using a phase noise emulator and a low linewidth (10 kHz) external cavity laser.

Performance of an optical equalizer in a 10 G wavelength converting optical access network.

A centralized optical processing unit (COPU) that functions both as a wavelength converter (WC) and optical burst equaliser in a 10 Gb/s wavelength-converting optical access network is proposed and experimentally characterized. This COPU is designed to consolidate drifting wavelengths generated with an uncooled laser in the upstream direction into a stable wavelength channel for WDM backhaul transmission and to equalize the optical loud/soft burst power in order to relax the burst-mode receiver dynamic range requirement. The COPU consists of an optical power equaliser composed of two cascaded SOAs followed by a WC.

Digital dual-rate burst-mode receiver for 10G and 1G coexistence in optical access networks.

A digital dual-rate burst-mode receiver, intended to support 10 and 1 Gb/s coexistence in optical access networks, is proposed and experimentally characterized. The receiver employs a standard DC-coupled photoreceiver followed by a 20 GS/s digitizer and the detection of the packet presence and line-rate is implemented in the digital domain. A polyphase, 2 samples-per-bit digital signal processing algorithm is then used for efficient clock and data recovery of the 10/1.

Generation and long-haul transmission of polarization-switched QPSK at 42.9 Gb/s.

We demonstrate, for the first time, the generation and transmission of polarization-switched QPSK (PS-QPSK) signals at 42.9 Gb/s. Long-haul transmission of PS-QPSK is experimentally investigated in a recirculating loop and compared with transmission of dual-polarization QPSK (DP-QPSK) at 42.

Simultaneous chromatic dispersion, polarization-mode-dispersion and OSNR monitoring at 40Gbit/s.

A novel method for independent and simultaneous monitoring of chromatic dispersion (CD), first-order PMD and OSNR in 40Gbit/s systems is proposed and demonstrated. This is performed using in-band tone monitoring of 5GHz, optically down-converted to a low intermediate-frequency (IF) of 10kHz. The measurement provides a large monitoring range with good accuracies for CD (4742+/-100ps/nm), differential group delay (DGD) (200+/-4ps) and OSNR (23+/-1dB), independently of the bit-rate.

Optically equalized 10 Gb/s NRZ digital burstmode receiver for dynamic optical networks.

A 10Gb/s NRZ burst-mode optical receiver suitable for receiving asynchronous bursts with power variations of up to 7 dB is presented. The digital burst mode receiver is based on a standard AC-coupled photodiode followed by asynchronous analogue to digital conversion at 20 GS/s. Symbol timing, amplitude and baseline wander corrections are implemented in digital signal processing without the need for additional linecoding, such as 8B10B, and special AC-coupling schemes.