3D microprinting of inorganic porous materials by chemical linking-induced solidification of nanocrystals.

Three-dimensional (3D) microprinting is considered a next-generation manufacturing process for the production of microscale components; however, the narrow range of suitable materials, which include mainly polymers, is a critical issue that limits the application of this process to functional inorganic materials. Herein, we develop a generalised microscale 3D printing method for the production of purely inorganic nanocrystal-based porous materials. Our process is designed to solidify all-inorganic nanocrystals via immediate dispersibility control and surface linking-induced interconnection in the nonsolvent linker bath and thereby creates multibranched gel networks.

Multifunctional Macroassembled Graphene Nanofilms with High Crystallinity.

A "cooling-contraction" method to separate large-area (up to 4.2 cm in lateral size) graphene oxide (GO)-assembled films (of nanoscale thickness) from substrates is reported. Heat treatment at 3000 °C of such free-standing macroscale films yields highly crystalline "macroassembled graphene nanofilms" (nMAGs) with 16-48 nm thickness.

A general approach to composites containing nonmetallic fillers and liquid gallium.

We report a versatile method to make liquid metal composites by vigorously mixing gallium (Ga) with non-metallic particles of graphene oxide (G-O), graphite, diamond, and silicon carbide that display either paste or putty-like behavior depending on the volume fraction. Unlike Ga, the putty-like mixtures can be kneaded and rolled on any surface without leaving residue. By changing temperature, these materials can be stiffened, softened, and, for the G-O-containing composite, even made porous.

Gram-scale synthesis of alkoxide-derived nitrogen-doped carbon foam as a support for Fe-N-C electrocatalysts.

Non-platinum group metal (non-PGM) catalysts for the oxygen reduction reaction (ORR) are set to reduce the cost of polymer electrolyte membrane fuel cells (PEFCs) by replacing platinum at the cathode. We previously developed unique nitrogen-doped carbon foams by template-free pyrolysis of alkoxide powders synthesized using a high temperature and high pressure solvothermal reaction. These were shown to be effective ORR electrocatalysts in alkaline media.

Ultrastiff, Strong, and Highly Thermally Conductive Crystalline Graphitic Films with Mixed Stacking Order.

A macroscopic film (2.5 cm × 2.5 cm) made by layer-by-layer assembly of 100 single-layer polycrystalline graphene films is reported.

Efficient Metal-Free Electrocatalysts from N-Doped Carbon Nanomaterials: Mono-Doping and Co-Doping.

N-doped carbon nanomaterials have rapidly grown as the most important metal-free catalysts in a wide range of chemical and electrochemical reactions. This current report summarizes the latest advances in N-doped carbon electrocatalysts prepared by N mono-doping and co-doping with other heteroatoms. The structure-performance relationship of these materials is subsequently rationalized and perspectives on developing more efficient and sustainable electrocatalysts from carbon nanomaterials are also suggested.

Colossal grain growth yields single-crystal metal foils by contact-free annealing.

Single-crystal metals have distinctive properties owing to the absence of grain boundaries and strong anisotropy. Commercial single-crystal metals are usually synthesized by bulk crystal growth or by deposition of thin films onto substrates, and they are expensive and small. We prepared extremely large single-crystal metal foils by "contact-free annealing" from commercial polycrystalline foils.

Folding Large Graphene-on-Polymer Films Yields Laminated Composites with Enhanced Mechanical Performance.

A folding technique is reported to incorporate large-area monolayer graphene films in polymer composites for mechanical reinforcement. Compared with the classic stacking method, the folding strategy results in further stiffening, strengthening, and toughening of the composite. By using a water-air-interface-facilitated procedure, an A5-size 400 nm thin polycarbonate (PC) film is folded in half 10 times to a ≈0.

Controlled Folding of Single Crystal Graphene.

Folded graphene in which two layers are stacked with a twist angle between them has been predicted to exhibit unique electronic, thermal, and magnetic properties. We report the folding of a single crystal monolayer graphene film grown on a Cu(111) substrate by using a tailored substrate having a hydrophobic region and a hydrophilic region. Controlled film delamination from the hydrophilic region was used to prepare macroscopic folded graphene with good uniformity on the millimeter scale.

Graphene Coatings as Barrier Layers to Prevent the Water-Induced Corrosion of Silicate Glass.

Corrosion-protective coatings for silicate glass based on the transfer of one or two layers of graphene grown on copper by chemical vapor deposition have been demonstrated. The effectiveness of graphene to act as a glass corrosion inhibitor was evaluated by water immersion testing. After 120 days of immersion in water, bare glass samples had a significant increase in surface roughness and defects, which resulted in a marked reduction in fracture strength.

Graphitized silicon carbide microbeams: wafer-level, self-aligned graphene on silicon wafers.

Currently proven methods that are used to obtain devices with high-quality graphene on silicon wafers involve the transfer of graphene flakes from a growth substrate, resulting in fundamental limitations for large-scale device fabrication. Moreover, the complex three-dimensional structures of interest for microelectromechanical and nanoelectromechanical systems are hardly compatible with such transfer processes. Here, we introduce a methodology for obtaining thousands of microbeams, made of graphitized silicon carbide on silicon, through a site-selective and wafer-scale approach.

Selective, cytotoxic organoruthenium(II) full-sandwich complexes: a structural, computational and in vitro biological study.

A structurally diverse range of lipophilic, cationic η(6)-arene η(5)-cyclopentadienyl (η(5)-Cp*) full-sandwich complexes of ruthenium(II) have been prepared and structurally characterized by Fourier-transform IR and NMR spectroscopy, electrospray mass spectrometry, and elemental microanalyses. Computational experiments incorporating the Hartree-Fock theory and the second-order Møller-Plesset perturbation theory predict each complex to possess a uniform δ+ electrostatic potential, with the cationic charge of the [RuCp*](+) moiety completely delocalizing throughout the molecular structure of each metallocene. In vitro cytotoxicity studies demonstrate these delocalized lipophilic cations to be potent growth inhibitors of eleven unique tumorigenic cell lines, while exhibiting significantly lower levels of toxicity towards both a normal human fibroblast and a mouse macrophage cell line.

Different approaches for evaluating exponentially weighted nonequilibrium relations.

The Kawasaki identity (KI) and the Jarzynski equality (JE) are important nonequilibrium relations. Both of these relations take the form of an ensemble average of an exponential function and can exhibit convergence problems when the average of the exponent differs greatly from the log of the average of the exponential function. In this work, we re-express these relations so that only selected regions need to be evaluated in an attempt to avoid these convergence issues.