Silicon double-disk optomechanical resonators from wafer-scale double-layered silicon-on-insulator.

Whispering Gallery Mode (WGM) optomechanical resonators are a promising technology for the simultaneous control and measurement of optical and mechanical degrees of freedom at the nanoscale. They offer potential for use across a wide range of applications such as sensors and quantum transducers. Double-disk WGM resonators, which host strongly interacting mechanical and optical modes co-localized around their circumference, are particularly attractive due to their high optomechanical coupling.

Giant Faraday rotation in atomically thin semiconductors.

Faraday rotation is a fundamental effect in the magneto-optical response of solids, liquids and gases. Materials with a large Verdet constant find applications in optical modulators, sensors and non-reciprocal devices, such as optical isolators. Here, we demonstrate that the plane of polarization of light exhibits a giant Faraday rotation of several degrees around the A exciton transition in hBN-encapsulated monolayers of WSe and MoSe under moderate magnetic fields.

Waveguide-integrated chip-scale optomechanical magnetometer.

Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications.

High-Performance Broadband Faraday Rotation Spectroscopy of 2D Materials and Thin Magnetic Films.

A Faraday rotation spectroscopy (FRS) technique is presented for measurements on the micrometer scale. Spectral acquisition speeds of about two orders of magnitude faster than state-of-the-art modulation spectroscopy setups are demonstrated. The experimental method is based on charge-coupled-device detection, avoiding speed-limiting components, such as polarization modulators with lock-in amplifiers.

Magnetic and Optical Properties of Gold-Coated Iron Oxide Nanoparticles.

In this work, magnetic and optical properties of magnetic nanoparticles were investigated, where the particles of iron oxide were prepared with a co-precipitation route and the component of gold was built up by reduction of AuCl on the surface of iron oxide to assemble nanocomposite structures in the form of an electrostatic stabilized suspension. The size of the particles obtained with TEM increased from of 8.9 ± 2.

Publisher Correction: Room temperature CO reduction to solid carbon species on liquid metals featuring atomically thin ceria interfaces.

The original version of this Article contained errors in the author affiliations. Affiliation 1 incorrectly read 'School of Chemical Engineering, University of New South Wales (UNSW), Sydney, NSW 2031, Australia' and affiliation 4 incorrectly read 'School of Engineering, RMIT University, Melbourne, VIC 3001, Australia.' This has now been corrected in both the PDF and HTML versions of the Article.

Room temperature CO reduction to solid carbon species on liquid metals featuring atomically thin ceria interfaces.

Negative carbon emission technologies are critical for ensuring a future stable climate. However, the gaseous state of CO does render the indefinite storage of this greenhouse gas challenging. Herein, we created a liquid metal electrocatalyst that contains metallic elemental cerium nanoparticles, which facilitates the electrochemical reduction of CO to layered solid carbonaceous species, at a low onset potential of -310 mV vs CO/C.

Printing two-dimensional gallium phosphate out of liquid metal.

Two-dimensional piezotronics will benefit from the emergence of new crystals featuring high piezoelectric coefficients. Gallium phosphate (GaPO) is an archetypal piezoelectric material, which does not naturally crystallise in a stratified structure and hence cannot be exfoliated using conventional methods. Here, we report a low-temperature liquid metal-based two-dimensional printing and synthesis strategy to achieve this goal.

BiO monolayers from elemental liquid bismuth.

Atomically thin, semiconducting transition and post transition metal oxides are emerging as a promising category of materials for high-performance oxide optoelectronic applications. However, the wafer-scale synthesis of crystalline atomically thin samples has been a challenge, particularly for oxides that do not present layered crystal structures. Herein we use a facile, scalable method to synthesise ultrathin bismuth oxide nanosheets using a liquid metal facilitated synthesis approach.

Ultrafast Acoustofluidic Exfoliation of Stratified Crystals.

While the remarkable properties of 2D crystalline materials offer tremendous opportunities for their use in optics, electronics, energy systems, biotechnology, and catalysis, their practical implementation largely depends critically on the ability to exfoliate them from a 3D stratified bulk state. This goal nevertheless remains elusive, particularly in terms of a rapid processing method that facilitates high yield and dimension control. An ultrafast multiscale exfoliation method is reported which exploits the piezoelectricity of stratified materials that are noncentrosymmetric in nature to trigger electrically-induced mechanical failure across weak grain boundaries associated with their crystal domain planes.

Quasi physisorptive two dimensional tungsten oxide nanosheets with extraordinary sensitivity and selectivity to NO.

Attributing to their distinct thickness and surface dependent physicochemical properties, two dimensional (2D) nanostructures have become an area of increasing interest for interfacial interactions. Effectively, properties such as high surface-to-volume ratio, modulated surface activities and increased control of oxygen vacancies make these types of materials particularly suitable for gas-sensing applications. This work reports a facile wet-chemical synthesis of 2D tungsten oxide nanosheets by sonication of tungsten particles in an acidic environment and thermal annealing thereafter.

A Gallium-Based Magnetocaloric Liquid Metal Ferrofluid.

We demonstrate a magnetocaloric ferrofluid based on a gadolinium saturated liquid metal matrix, using a gallium-based liquid metal alloy as the solvent and suspension medium. The material is liquid at room temperature, while exhibiting spontaneous magnetization and a large magnetocaloric effect. The magnetic properties were attributed to the formation of gadolinium nanoparticles suspended within the liquid gallium alloy, which acts as a reaction solvent during the nanoparticle synthesis.

A liquid metal reaction environment for the room-temperature synthesis of atomically thin metal oxides.

Two-dimensional (2D) oxides have a wide variety of applications in electronics and other technologies. However, many oxides are not easy to synthesize as 2D materials through conventional methods. We used nontoxic eutectic gallium-based alloys as a reaction solvent and co-alloyed desired metals into the melt.

Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals.

A variety of deposition methods for two-dimensional crystals have been demonstrated; however, their wafer-scale deposition remains a challenge. Here we introduce a technique for depositing and patterning of wafer-scale two-dimensional metal chalcogenide compounds by transforming the native interfacial metal oxide layer of low melting point metal precursors (group III and IV) in liquid form. In an oxygen-containing atmosphere, these metals establish an atomically thin oxide layer in a self-limiting reaction.

Excitation dependent bidirectional electron transfer in phthalocyanine-functionalised MoS nanosheets.

Two-dimensional (2D) transition metal chalcogenides such as 2D MoS are considered prime candidate materials for the design of next generation optoelectronics. Functionalisation of these materials is considered to be a key step in tailoring their properties towards specific applications and unlocking their full potential. Here we present a van der Waals functionalisation strategy for creating MoS nanosheets decorated with free base phthalocyanine chromophores.

Reductive exfoliation of substoichiometric MoS2 bilayers using hydrazine salts.

Substoichiometric molybdenum disulphide (MoSx) nanosheets are successfully synthesised following a novel reductive route using hydrazine salts. The resulting two dimensional crystals are found to be highly monodispersed in thickness, forming exclusively 1.9 ± 0.

Enhanced quantum efficiency from a mosaic of two dimensional MoS2 formed onto aminosilane functionalised substrates.

Developing scalable methods of growing two dimensional molybdenum disulphide (2D MoS2) with strong optical properties, on any desired substrates, is a necessary step towards industrial uptake of this material for optical applications. In this study, Si/SiO2 substrates were functionalised using self-assembled monolayers of three different aminosilanes with various numbers of amine groups and molecular lengths as underlayers for enhancing the adherence of the molybdenum precursor. The tetrahedral [MoS4](2-) anion groups from the molybdenum precursor were bonded on these silanised Si/SiO2 substrates afterwards.

Exfoliation Solvent Dependent Plasmon Resonances in Two-Dimensional Sub-Stoichiometric Molybdenum Oxide Nanoflakes.

Few-layer two-dimensional (2D) molybdenum oxide nanoflakes are exfoliated using a grinding assisted liquid phase sonication exfoliation method. The sonication process is carried out in five different mixtures of water with both aprotic and protic solvents. We found that surface energy and solubility of mixtures play important roles in changing the thickness, lateral dimension, and synthetic yield of the nanoflakes.

Acoustically-Driven Trion and Exciton Modulation in Piezoelectric Two-Dimensional MoS2.

By exploiting the very recent discovery of the piezoelectricity in odd-numbered layers of two-dimensional molybdenum disulfide (MoS2), we show the possibility of reversibly tuning the photoluminescence of single and odd-numbered multilayered MoS2 using high frequency sound wave coupling. We observe a strong quenching in the photoluminescence associated with the dissociation and spatial separation of electrons-holes quasi-particles at low applied acoustic powers. At the same applied powers, we note a relative preference for ionization of trions into excitons.

Physisorption-Based Charge Transfer in Two-Dimensional SnS2 for Selective and Reversible NO2 Gas Sensing.

Nitrogen dioxide (NO2) is a gas species that plays an important role in certain industrial, farming, and healthcare sectors. However, there are still significant challenges for NO2 sensing at low detection limits, especially in the presence of other interfering gases. The NO2 selectivity of current gas-sensing technologies is significantly traded-off with their sensitivity and reversibility as well as fabrication and operating costs.

Two-step synthesis of luminescent MoS(2)-ZnS hybrid quantum dots.

A surfactant assisted technique has been used to promote the exfoliation of molybdenum disulphide (MoS2) in a water-ethanol mixture, to avoid the use of harsh organic solvents, whilst still producing sufficient concentration of MoS2 in suspension. The exfoliated flakes are converted into MoS2 quantum dots (QDs), through a hydrothermal procedure. Alternatively, when the flakes are processed with precursors for zinc sulphide (ZnS) synthesis, a simultaneous break-down and composite growth is achieved.

Electronic Tuning of 2D MoS2 through Surface Functionalization.

The electronic properties of thiol-functionalized 2D MoS2 nanosheets are investigated. Shifts in the valence and conduction bands and Fermi levels are observed while bandgaps remain unaffected. These findings allow the tuning of energy barriers between 2D MoS2 and other materials, which can lead to improved control over 2D MoS2 -based electronic and optical devices and catalysts.

2D MoS2 PDMS Nanocomposites for NO2 Separation.

At a relatively low loading concentration (≈0.02 wt%) of 2D MoS 2 flakes in PDMS, the composite membrane is able to almost completely block the permeation of NO2 gas molecules at ppm levels. This major reduction is ascribed to the strong physisorption of NO2 gas molecules onto the 2D MoS2 flake basal planes.

Two solvent grinding sonication method for the synthesis of two-dimensional tungsten disulphide flakes.

Two-dimensional tungsten disulphide flakes are developed via a two solvent grinding assisted liquid phase exfoliation method. Our investigations show the distinct advantages of this approach that include reduced residues of the solvent used, high yield and creating relatively thin flakes suitable for electronic, optical, catalytic and energy storage applications.