Publications by authors named "Benjamin Butz"

Single-atom (SA) decoration has emerged as a frontier in catalysis due to its unique characteristics. Recently, decorated Pt single atoms on titania have shown promise in photocatalytic hydrogen evolution. In this work, we demonstrate that Pt SAs can spontaneously deposit on the surface, driven by electrostatic forces; the key is to determine the golden pH and surface potential.

View Article and Find Full Text PDF

Electrochemically exfoliated graphene (e-G) thin films on Nafion membranes exhibit a selective barrier effect against undesirable fuel crossover. This approach combines the high proton conductivity of state-of-the-art Nafion and the ability of e-G layers to effectively block the transport of methanol and hydrogen. Nafion membranes are coated with aqueous dispersions of e-G on the anode side, making use of a facile and scalable spray process.

View Article and Find Full Text PDF

Terahertz (THz) radiation is a valuable tool to investigate the electronic properties of lead halide perovskites (LHPs). However, attaining high-resolution information remains elusive, as the diffraction-limited spatial resolution (∼300 μm) of conventional THz methods prevents a direct analysis of microscopic effects. Here, we employ THz scattering scanning near-field optical microscopy (THz-sSNOM) for nanoscale imaging of cesium lead bromide (CsPbBr) thin films down to the single grain level at 600 GHz.

View Article and Find Full Text PDF

Objective: Models explaining technology acceptance fail to recognize the influence temporary, compulsory usage, meaning forced usage due to external factors, may have on user evaluation and continued diffusion. However, in context of the Covid-19 pandemic, a highly infectious respiratory disease, the significance of this factor is evident. Triggered by legal contact restrictions and extended reimbursement capacities, usage of telepsychotherapy increased drastically, thereby influencing therapists' attitude and increasing the technology's maturity.

View Article and Find Full Text PDF

Many European sculptures and altarpieces from the Middle Ages were decorated with Zwischgold, a bilayer metal leaf with an ultra-thin gold face backed by silver. Zwischgold corrodes quickly when exposed to air, causing the surface of the artefact to darken and lose gloss. The conservation of such Zwischgold applied artefacts has been an obstinate problem.

View Article and Find Full Text PDF

A large and growing number of applications benefit from simple, fast and highly sensitive 3D imaging sensors. The Focus-Induced Photoresponse (FIP) can achieve 3D sensing functionalities by simply evaluating the irradiance dependent nonlinear sensor response in defect-based materials. Since this advantage is intricately associated to a slow response, the electrical bandwidth of present FIP detectors is limited to a few [Formula: see text] only.

View Article and Find Full Text PDF

In the past 20 years, a vast amount of research has shown that Augmented and Mixed Reality applications can support physical exercises in medical rehabilitation. In this paper, we contribute a taxonomy, providing an overview of the current state of research in this area. It is based on a comprehensive literature review conducted on the five databases Web of Science, ScienceDirect, PubMed, IEEE Xplore, and ACM up to July 2021.

View Article and Find Full Text PDF

We investigate a model bioassay in a liquid environment using a -scanning planar Yagi-Uda antenna, focusing on the fluorescence collection enhancement of ATTO-647N dye conjugated to DNA (deoxyribonucleic acid) molecules. The antenna changes the excitation and the decay rates and, more importantly, the emission pattern of ATTO-647N, resulting in a narrow emission angle (41°) and improved collection efficiency. We efficiently detect immobilized fluorescently-labeled DNA molecules, originating from solutions with DNA concentrations down to 1 nM.

View Article and Find Full Text PDF

All solid-state batteries offer the possibility of increased safety at potentially higher energy densities compared to conventional lithium-ion batteries. In an all-ceramic oxide battery, the composite cathode consists of at least one ion-conducting solid electrolyte and an active material, which are typically densified by sintering. In this study, the reaction of the solid electrolyte LiAlTi(PO) (LATP) and the active material LiNiCoMnO (NCM622) is investigated by cosintering at temperatures between 550 and 650 °C.

View Article and Find Full Text PDF

Core-shell nanowires (NWs) with asymmetric shells allow for strain engineering of NW properties because of the bending resulting from the lattice mismatch between core and shell material. The bending of NWs can be readily observed by electron microscopy. Using X-ray diffraction analysis with a micro- and nano-focused beam, the bending radii found by the microscopic investigations are confirmed and the strain in the NW core is analyzed.

View Article and Find Full Text PDF

The increasing use of manufactured nanomaterials (MNMs) and their inevitable release into the environment, especially via wastewater treatment plants (WWTPs), poses a potential threat for aquatic organisms. The characterization of MNMs with analytical tools to comprehend their fate and effect on the ecosystem is hence of great importance for environmental risk assessment. We herein report, for the first time, the investigation of physicochemical transformation processes during artificial wastewater treatment of silver (Ag-NPs) and titanium dioxide nanoparticles (TiO-NPs) via selected area electron diffraction (SAED).

View Article and Find Full Text PDF

Whereas standard transmission electron microscopy studies are unable to preserve the native state of chemically reactive and beam-sensitive battery materials after operation, such materials remain pristine at cryogenic conditions. It is then possible to atomically resolve individual lithium metal atoms and their interface with the solid electrolyte interphase (SEI). We observe that dendrites in carbonate-based electrolytes grow along the <111> (preferred), <110>, or <211> directions as faceted, single-crystalline nanowires.

View Article and Find Full Text PDF

Lithium (Li) metal is a high-capacity anode material (3860 mAh g) that can enable high-energy batteries for electric vehicles and grid-storage applications. However, Li metal is highly reactive and repeatedly consumed when exposed to liquid electrolyte (during battery operation) or the ambient environment (throughout battery manufacturing). Studying these corrosion reactions on the nanoscale is especially difficult due to the high chemical reactivity of both Li metal and its surface corrosion films.

View Article and Find Full Text PDF

The formation of the biophotonic gyroid material in butterfly wing scales is an exceptional feat of evolutionary engineering of functional nanostructures. It is hypothesized that this nanostructure forms by chitin polymerization inside a convoluted membrane of corresponding shape in the endoplasmic reticulum. However, this dynamic formation process, including whether membrane folding and chitin expression are simultaneous or sequential processes, cannot yet be elucidated by in vivo imaging.

View Article and Find Full Text PDF

With the recent advances in instrumentation pushing the limits of in situ transmission electron microscopy, the question of local sample temperature comes into focus again. In this work the applicability of parallel beam electron diffraction to locally measure and monitor the sample temperature in TEM is assessed, with applications for in situ heating experiments in mind. With Au nanoparticles applied to the sample surface, temperature is measured in the range from RT to 890°C by evaluating the change in scattering angle upon thermal expansion.

View Article and Find Full Text PDF

Controlling the chemistry of graphene is necessary to enable applications in materials and life sciences. Research beyond graphene oxide is targeted to avoid the highly defective character of the carbon framework. Herein, we show how to optimize the synthesis of oxo-functionalized graphene (oxo-G) to prepare high-quality monolayer flakes that even allow for direct transmission electron microscopy investigation at atomic resolution (HRTEM).

View Article and Find Full Text PDF

The organic semiconductor silver-tetracyanoquinodimethane (Ag-TCNQ) exhibits electrical switching and memory characteristics. Employing a scanning tunnelling microscopy setup inside a transmission electron microscope, the switching behaviour of individual Ag-TCNQ nanowires (NWs) is investigated in detail. For a large number of NWs, the switching between a high (OFF) and a low (ON) resistance state was successfully stimulated by negative bias sweeps.

View Article and Find Full Text PDF

Tuebingen's Sectio Chirurgica (TSC) is an innovative, interactive, multimedia, and transdisciplinary teaching method designed to complement dissection courses. The Tuebingen's Sectio Chirurgica (TSC) allows clinical anatomy to be taught via interactive live stream surgeries moderated by an anatomist. This method aims to provide an application-oriented approach to teaching anatomy that offers students a deeper learning experience.

View Article and Find Full Text PDF

The wing scales of the Green Hairstreak butterfly Callophrys rubi consist of crystalline domains with sizes of a few micrometers, which exhibit a congenitally handed porous chitin microstructure identified as the chiral triply periodic single-gyroid structure. Here, the chirality and crystallographic texture of these domains are investigated by means of electron tomography. The tomograms unambiguously reveal the coexistence of the two enantiomeric forms of opposite handedness: the left- and right-handed gyroids.

View Article and Find Full Text PDF

We investigate the resistivity switching in individual Ag-TCNQ wires with on/off-ratios of up to 10(3). Raman and soft X-ray absorption microspectroscopy studies disclose reverse charge transfer. Quantifying of the fraction of neutral TCNQ within the switched material yields values up to 22.

View Article and Find Full Text PDF

In this work we present a novel route to synthesize well defined germanium-silicon alloy (GexSi1-x) and core-shell nanocrystals (NCs) employing monosilane (SiH4) and monogermane (GeH4) as precursors in a continuously operated two-stage hot-wall aerosol reactor setup. The first hot-wall reactor stage (HWR I) is used to produce silicon (Si) seed particles from SiH4 pyrolysis in Argon (Ar). The resulting seeding aerosol is fed into the second reactor stage (HWR II) and a mixture of SiH4 and GeH4 is added.

View Article and Find Full Text PDF

Tandem architecture is the most relevant concept to overcome the efficiency limit of single-junction photovoltaic solar cells. Series-connected tandem polymer solar cells (PSCs) have advanced rapidly during the past decade. In contrast, the development of parallel-connected tandem cells is lagging far behind due to the big challenge in establishing an efficient interlayer with high transparency and high in-plane conductivity.

View Article and Find Full Text PDF

We report the characterization of carbon nanodots (CNDs) synthesized under mild and controlled conditions, that is, in a microwave reactor. The CNDs thus synthesized exhibit homogeneous and narrowly dispersed optical properties. They are thus well suited as a testbed for studies of the photophysics of carbon-based nanoscopic emitters.

View Article and Find Full Text PDF

Dislocations represent one of the most fascinating and fundamental concepts in materials science. Most importantly, dislocations are the main carriers of plastic deformation in crystalline materials. Furthermore, they can strongly affect the local electronic and optical properties of semiconductors and ionic crystals.

View Article and Find Full Text PDF

Objective: Clinical studies reveal that veneer chipping is one major problem associated with zirconia based dental restorations, the underlying mechanisms being still investigated. We semi-quantitatively analyzed the effects of different surface treatments (thermal etching, 35/105 μm sandblasting and coarse bur drilling (150 μm)) on the microstructure of a zirconia veneered dental ceramic.

Methods: The relative monoclinic content on zirconia surfaces was determined using X-ray diffraction (XRD).

View Article and Find Full Text PDF

A PHP Error was encountered

Severity: Warning

Message: fopen(/var/lib/php/sessions/ci_sessionuuk3dl34f9v32qo00b51clvkheflji4o): Failed to open stream: No space left on device

Filename: drivers/Session_files_driver.php

Line Number: 177

Backtrace:

File: /var/www/html/index.php
Line: 316
Function: require_once

A PHP Error was encountered

Severity: Warning

Message: session_start(): Failed to read session data: user (path: /var/lib/php/sessions)

Filename: Session/Session.php

Line Number: 137

Backtrace:

File: /var/www/html/index.php
Line: 316
Function: require_once