Low, but Not High, Pulsating Fluid Shear Stress Affects Matrix Extracellular Phosphoglycoprotein Expression, Mainly via Integrin β Subunits in Pre-Osteoblasts.

Matrix extracellular phosphoglycoprotein (Mepe), present in bone and dentin, plays important multifunctional roles in cell signaling, bone mineralization, and phosphate homeostasis. Mepe expression in bone cells changes in response to pulsating fluid shear stress (PFSS), which is transmitted into cells through integrin-based adhesion sites, i.e.

Gingival fibroblasts produce paracrine signals that affect osteoclastogenesis in vitro.

In periodontitis, gingival fibroblasts (GF) appear to produce a multitude of paracrine factors. However, the influence of GF-derived soluble factors on osteoclastogenesis remains unclear. In this case study, production of paracrine factors by GF was assessed under inflammatory and non-inflammatory conditions, as well as their effect on osteoclastogenesis.

Paradox: Curcumin, a Natural Antioxidant, Suppresses Osteosarcoma Cells via Excessive Reactive Oxygen Species.

Osteosarcoma (OS) is an aggressive tumor with a rare incidence. Extended surgical resections are the prevalent treatment for OS, which may cause critical-size bone defects. These bone defects lead to dysfunction, weakening the post-surgical quality of patients' life.

Osteogenic Activity on NaOH-Etched Three-Dimensional-Printed Poly-ɛ-Caprolactone Scaffolds in Perfusion or Spinner Flask Bioreactor.

Bioreactor systems, for example, spinner flask and perfusion bioreactors, and cell-seeded three-dimensional (3D)-printed scaffolds are used in bone tissue engineering strategies to stimulate cells and produce bone tissue suitable for implantation into the patient. The construction of functional and clinically relevant bone graft using cell-seeded 3D-printed scaffolds within bioreactor systems is still a challenge. Bioreactor parameters, for example, fluid shear stress and nutrient transport, will crucially affect cell function on 3D-printed scaffolds.

Compressed Prostate Cancer Cells Decrease Osteoclast Activity While Enhancing Osteoblast Activity In Vitro.

Once prostate cancer cells metastasize to bone, they perceive approximately 2 kPa compression. We hypothesize that 2 kPa compression stimulates the epithelial-to-mesenchymal transition (EMT) of prostate cancer cells and alters their production of paracrine signals to affect osteoclast and osteoblast behavior. Human DU145 prostate cancer cells were subjected to 2 kPa compression for 2 days.

Cytotoxicity and anti-biofilm properties of novel hybrid-glass-based caries infiltrant.

Objectives: To assess the cytotoxicity of an experimental hybrid-glass-based infiltrant and its effect on biofilm attachment, growth and metabolic activity, and to compare it to the resin-based infiltrant Icon.

Methods: Cytotoxicity of hybrid-glass-based material (EXP) and resin-based infiltrant Icon (Icon) was tested in direct contact tests on freshly cured (direct_mat) and on materials kept for 24 h in cell culture medium (direct_exmat), and extract test with materials 24-h extracts (extract). Cell viability of L929 mouse fibroblast cell line was measured with MTT assay, according to ISO10993-5:2009.

Radiation modulates expression and related activities of c-Met protein in oral tongue squamous cell carcinoma cell lines.

Objectives: c-Met, a receptor tyrosine kinase, is involved in the growth, invasion and metastasis of a variety of cancers. In a set of cell lines from several solid tumors, a five-fold increase in c-Met expression after irradiation has been reported. This study aimed to assess if c-Met is likewise abundantly expressed in oral tongue squamous cell carcinoma (OTSCC) upon exposure to irradiation, followed by a Met-induced biological response.

Multifunctional PEGylated Niosomal Nanoparticle-Loaded Herbal Drugs as a Novel Nano-Radiosensitizer and Stimuli-Sensitive Nanocarrier for Synergistic Cancer Therapy.

Nowadays, radiotherapy is one of the most effective treatments for breast cancer. In order to overcome the radioresistance of cancer cells, radio-sensitizing agents can be used combined with irradiation to increase the therapeutic efficiency. Curcumin can enhance the radiosensitivity of cancer cells and decrease their viability by the accumulation of these cells in the G2 phase.

Fungal Infected Adipose Stem Cells: The Effects of Novel Lipo-Niosome Nanoparticles Loaded with Amphotericin B and Thymus Essential Oil.

Objective: In this study, we aimed to develop new Lipo-niosomes based nanoparticles loaded with Amphotericin B (AmB) and Thymus Essential Oil (TEO) and test their effectiveness in the treatment of fungal-infected human adipose stem cells (hASCs).

Materials And Methods: In this experimental study, optimal formulation of AmB and TEO loaded lipo-niosome (based on lipid-surfactant thin-film hydration method) was chemically, and biologically characterized. Therefore, encapsulation capacity, drug release, size, and the survival rate of cells with different concentrations of free and encapsulated AmB/ TEO were evaluated using the MTT method, and its antifungal activity was compared with conventional AmB.

WEE1 kinase inhibitor MK-1775 sensitizes oral tongue squamous cell carcinoma cells to radiation irrespective of TP53 status.

Objective: Oral tongue squamous cell carcinoma (OTSCC) frequently harbors non-functional p53 and depends on G2/M checkpoint mediated by WEE1. WEE1 suppression has been identified as a promising anti-tumor strategy. This study investigated the capacity of WEE1 kinase inhibitor (MK-1775) and its underlying mechanisms in enhancing radiation responses of OTSCC cells in vitro.

To B (Bone Morphogenic Protein-2) or Not to B (Bone Morphogenic Protein-2): Mesenchymal Stem Cells May Explain the Protein's Role in Osteosarcomagenesis.

Osteosarcoma (OS), a primary malignant bone tumor, stems from bone marrow-derived mesenchymal stem cells (BMSCs) and/or committed osteoblast precursors. Distant metastases, in particular pulmonary and skeletal metastases, are common in patients with OS. Moreover, extensive resection of the primary tumor and bone metastases usually leads to bone defects in these patients.

K-Carrageenan Stimulates Pre-Osteoblast Proliferation and Osteogenic Differentiation: A Potential Factor for the Promotion of Bone Regeneration?

Current cell-based bone tissue regeneration strategies cannot cover large bone defects. K-carrageenan is a highly hydrophilic and biocompatible seaweed-derived sulfated polysaccharide, that has been proposed as a promising candidate for tissue engineering applications. Whether κ-carrageenan can be used to enhance bone regeneration is still unclear.

Pulsating fluid flow affects pre-osteoblast behavior and osteogenic differentiation through production of soluble factors.

Bone mass increases after error-loading, even in the absence of osteocytes. Loaded osteoblasts may produce a combination of growth factors affecting adjacent osteoblast differentiation. We hypothesized that osteoblasts respond to a single load in the short-term (minutes) by changing F-actin stress fiber distribution, in the intermediate-term (hours) by signaling molecule production, and in the long-term (days) by differentiation.

Increased Osteogenic Potential of Pre-Osteoblasts on Three-Dimensional Printed Scaffolds Compared to Porous Scaffolds for Bone Regeneration.

Background: One of the main challenges with conventional scaffold fabrication methods is the inability to control scaffold architecture. Recently, scaffolds with controlled shape and architecture have been fabricated using three-dimensional printing (3DP). Herein, we aimed to determine whether the much tighter control of microstructure of 3DP poly(lactic-co-glycolic) acid/β-tricalcium phosphate (PLGA/β-TCP) scaffolds is more effective in promoting osteogenesis than porous scaffolds produced by solvent casting/porogen leaching.

Inlet flow rate of perfusion bioreactors affects fluid flow dynamics, but not oxygen concentration in 3D-printed scaffolds for bone tissue engineering: Computational analysis and experimental validation.

Fluid flow dynamics and oxygen-concentration in 3D-printed scaffolds within perfusion bioreactors are sensitive to controllable bioreactor parameters such as inlet flow rate. Here we aimed to determine fluid flow dynamics, oxygen-concentration, and cell proliferation and distribution in 3D-printed scaffolds as a result of different inlet flow rates of perfusion bioreactors using experiments and finite element modeling. Pre-osteoblasts were treated with 1 h pulsating fluid flow with low (0.

3D-printed poly(Ɛ-caprolactone) scaffold with gradient mechanical properties according to force distribution in the mandible for mandibular bone tissue engineering.

In bone tissue engineering, prediction of forces induced to the native bone during normal functioning is important in the design, fabrication, and integration of a scaffold with the host. The aim of this study was to customize the mechanical properties of a layer-by-layer 3D-printed poly(ϵ-caprolactone) (PCL) scaffold estimated by finite element (FE) modeling in order to match the requirements of the defect, to prevent mechanical failure, and ensure optimal integration with the surrounding tissue. Forces and torques induced on the mandibular symphysis during jaw opening and closing were predicted by FE modeling.

Short Pretreatment with Calcitriol Is Far Superior to Continuous Treatment in Stimulating Proliferation and Osteogenic Differentiation of Human Adipose Stem Cells.

Objective: This study investigated whether short stimulation (30 minutes) of human adipose stem cells (hASCs) with 1,25-dihydroxyvitamin D (calcitriol or 1,25-(OH)VitD), fitting within the surgical procedure time frame, suffices to induce osteogenic differentiation, and compared this with continuous treatment with 1,25-(OH)VitD.

Materials And Methods: In this experimental study, hASCs were pretreated with/without 10 nM calcitriol for 30 minutes, seeded on biphasic calcium phosphate (BCP), and cultured for 3 weeks with/without 1,25-(OH)VitD. Cell attachment was determined 30 minutes after cell seeding.

IL-1β Damages Fibrocartilage and Upregulates MMP-13 Expression in Fibrochondrocytes in the Condyle of the Temporomandibular Joint.

The temporomandibular joint (TMJ), which differs anatomically and biochemically from hyaline cartilage-covered joints, is an under-recognized joint in arthritic disease, even though TMJ damage can have deleterious effects on physical appearance, pain and function. Here, we analyzed the effect of IL-1β, a cytokine highly expressed in arthritic joints, on TMJ fibrocartilage-derived cells, and we investigated the modulatory effect of mechanical loading on IL-1β-induced expression of catabolic enzymes. TMJ cartilage degradation was analyzed in 8-11-week-old mice deficient for IL-1 receptor antagonist (IL-1RA) and wild-type controls.

Gentle cyclic straining of human fibroblasts on electrospun scaffolds enhances their regenerative potential.

The extracellular matrix of fascia-like tissues is a resilient network of collagenous fibers that withstand the forces of daily life. When overstretched, the matrix may tear, with serious consequences like pelvic organ prolapse (POP). Synthetic implants can provide mechanical support and evoke a host response that induces new matrix production, thus reinforcing the fascia.

Enhanced osteogenic activity by MC3T3-E1 pre-osteoblasts on chemically surface-modified poly(ε-caprolactone) 3D-printed scaffolds compared to RGD immobilized scaffolds.

In bone tissue engineering, the intrinsic hydrophobicity and surface smoothness of three-dimensional (3D)-printed poly(ε-caprolactone) scaffolds hamper cell attachment, proliferation and differentiation. This intrinsic hydrophobicity of poly(ε-caprolactone) can be overcome by surface modifications, such as surface chemical modification or immobilization of biologically active molecules on the surface. Moreover, surface chemical modification may alter surface smoothness.

VEGF delivery by smart polymeric PNIPAM nanoparticles affects both osteogenic and angiogenic capacities of human bone marrow stem cells.

Objective: Bone tissue engineering (BTE) faces a major challenge with cell viability after implantation of a construct due to lack of functional vasculature within the implant. Human bone marrow derived mesenchymal stem cells (hBMSCs) have the potential to undergo transdifferentiation towards an endothelial cell phenotype, which may be appropriate for BTE in conjunction with the appropriate scaffolds and microenvironment.

Hypothesis And Methods: We hypothesized that slow delivery of vascular endothelial growth factor (VEGF) by using nanoparticles in combination with osteogenic stimuli might enhance both osteogenic and angiogenic differentiation of angiogenic primed hBMSCs cultured in an osteogenic microenvironment.

Codelivery of doxorubicin and JIP1 siRNA with novel EphA2-targeted PEGylated cationic nanoliposomes to overcome osteosarcoma multidrug resistance.

Purpose: Osteosarcoma (OS) mostly affects children and young adults, and has only a 20%-30% 5-year survival rate when metastasized. We aimed to create dual-targeted (extracellular against EphA2 and intracellular against JNK-interacting protein 1 [JIP1]), doxorubicin (DOX)-loaded liposomes to treat OS metastatic disease.

Materials And Methods: Cationic liposomes contained -[1-(2,3-dioleoyloxy)propyl]-,,-trimethylammonium methyl-sulfate (DOTAP), cholesterol, 1,2-dipalmitoyl--glycero-3-phosphocholine (DPPC), and distearoyl-phosphatidylethanolamine-methyl-poly(ethylene glycol) (DSPE-mPEG) conjugate.

An in vitro method to keep human aortic tissue sections functionally and structurally intact.

The pathophysiology of aortic aneurysms (AA) is far from being understood. One reason for this lack of understanding is basic research being constrained to fixated cells or isolated cell cultures, by which cell-to-cell and cell-to-matrix communications are missed. We present a new, in vitro method for extended preservation of aortic wall sections to study pathophysiological processes.

Preparation of PEGylated cationic nanoliposome-siRNA complexes for cancer therapy.

Cationic liposomes have been investigated as non-viral vectors for gene delivery for more than a decade to overcome challenges associated with viral gene delivery. However, due to instability of liposomes, siRNA delivery is still a serious problem. In this study, we developed stealth PEGylated liposome formulations and focused on the effects of PEGylated liposomes on parameters related to size, zeta potential, polydispersity index, siRNA-loading efficiency and long-term stability of the siRNA-liposome complex.