Enhanced Visible-Light Photodetection with Undoped and Doped ZnO Thin-Film Self-Powered Photodetectors.

Photodetection plays an essential role in the visible-light zone and is important in modern science and technology owing to its potential applications in various fields. Fabrication of a stable photodetector remains a challenge for researchers. We demonstrated a high-response/recovery and self-powered undoped ZnO (UZO) and Cu-doped ZnO (CZO) thin film-based visible-light photodetector fabricated on a cost-effective Si substrate using reactive cosputtering.

Bioinspired palladium-doped manganese oxide nanocorns: a remarkable antimicrobial agent targeting phyto/animal pathogens.

Microbial pathogens are known for causing great environmental stress, owing to which emerging challenges like lack of eco-friendly remediation measures, development of drug-resistant and mutational microbial strains, etc., warrants novel and green routes as a stepping stone to serve such concerns sustainably. In the present study, palladium (Pd) doped manganese (II, III) oxide (MnO) nanoparticles (NPs) were synthesized using an aqueous Syzygium aromaticum bud (ASAB) extract.

Surface functionalized silver-doped ZnO nanocatalyst: a sustainable cooperative catalytic, photocatalytic and antibacterial platform for waste treatment.

The different dyes used and discharged in industrial settings and microbial pathogenic issues have raised serious concerns about the content of bodies of water and the impact that dyes and microbes have on the environment and human health. Efficient treatment of contaminated water is thus a major challenge that is of great interest to researchers around the world. In the present work, we have fabricated functionalized silver-doped ZnO nanoparticles (Ag-doped ZnO NPs) a hydrothermal method for wastewater treatment.

Bacterial Compatibility/Toxicity of Biogenic Silica (b-SiO) Nanoparticles Synthesized from Biomass Rice Husk Ash.

Biogenic silica (b-SiO) nanopowders from rice husk ash (RHA) were prepared by chemical method and their bacterial compatibility/toxicity was analyzed. The X-ray diffractometry (XRD) patterns of the b-SiO nanopowders indicated an amorphous feature due to the absence of any sharp peaks. Micrographs of the b-SiO revealed that sticky RHA synthesized SiO nanopowder (S1) had clustered spherical nanoparticles (70 nm diameter), while b-SiO nanopowder synthesized from red RHA (S2) and b-SiO nanopowder synthesized from brown RHA (S3) were purely spherical (20 nm and 10 nm diameter, respectively).

DNA-probe-target interaction based detection of Brucella melitensis by using surface plasmon resonance.

Surface plasmon resonance (SPR) immunosensor using 4-mercaptobenzoic acid (4-MBA) modified gold (4-MBA/Au) SPR chip was developed first time for the detection of Brucella melitensis (B. melitensis) based on the screening of its complementary DNA target by using two different newly designed DNA probes of IS711 gene. Herein, interaction between DNA probes and target molecule are also investigated and result revealed that the interaction is spontaneous.

Catalytic activity of Fe/ZrO₂ nanoparticles for dimethyl sulfide oxidation.

A low-temperature vapor phase catalytic oxidation of dimethyl sulfide (DMS) with ozone over nano-sized Fe2O3-ZrO2 catalyst is carried out at temperatures of 50-200°C. Nanostructured Fe2O3-ZrO2 catalyst (FZN) is prepared by modified sol-gel method using citric acid as a chelating agent and conventional FZ catalyst is prepared with co-precipitation method. The catalysts are characterized using N2-BET surface area and pore size distributions, X-ray diffraction, TPR, TPD of DMS and NH3, SEM and TEM.

Antimicrobial properties of CuO nanorods and multi-armed nanoparticles against B. anthracis vegetative cells and endospores.

Two different kinds of CuO nanoparticles (NPs) namely CuO nanorods (PS2) and multi-armed nanoparticles (P5) were synthesized by wet and electrochemical routes, respectively. Their structure, morphology, size and compositions were characterized by SEM, EDX and XRD. The NPs demonstrated strong bactericidal potential against Bacillus anthracis cells and endospores.

Surface plasmon resonance characterization of monoclonal and polyclonal antibodies of malaria for biosensor applications.

Surface plasmon resonance (SPR) screening of monoclonal and polyclonal antibodies of Plasmodium falciparum (MoabPf and PoabPf) for recombinant Histidine rich protein-II antigen (Ag) of Pf (rHRP-II Ag) was conducted in a real-time and label-free manner to select an appropriate antibody (Ab) for biosensor applications. In this study 4-mercaptobenzoic acid (4-MBA) modified gold SPR chip was used for immobilizing the Ag and then Ab was interacted. SEM image showed modification of SPR chip with 4-MBA and EDAX confirmed the presence of 4-MBA on the SPR chip.

Alumina-supported oxime for the degradation of sarin and diethylchlorophosphate.

1-(4-Chlorophenyl))-N-hydroxymethanimine and cyclohexyl-N-hydroxymethanimine were synthesized and a well-established oxime, i.e., 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride was purchased.

Catalytic removal of carbon monoxide over carbon supported palladium catalyst.

Carbon supported palladium (Pd/C) catalyst was prepared by impregnation of palladium chloride using incipient wetness technique, which was followed by liquid phase reduction with formaldehyde. Thereafter, Pd/C catalyst was characterized using X-ray diffractometery, scanning electron microscopy, atomic absorption spectroscopy, thermo gravimetry, differential scanning calorimetry and surface characterization techniques. Catalytic removal of carbon monoxide (CO) over Pd/C catalyst was studied under dynamic conditions.

A convenient first aid kit for chemical and biological agents and for radiation exposure.

The chemical and biological warfare agents are extremely toxic in nature. They act rapidly even in very small quantities and death may occur in minutes. Hence, physical and medical protection must be provided immediately to save life or avoid serious injury.

Kinetics of degradation of sulfur mustard and sarin simulants on HKUST-1 metal organic framework.

The applicability of HKUST-1 for the degradation of sulfur mustard and sarin simulants was studied with and without coadsorbed water. Degradation was found to be via hydrolysis and dependent on the nucleophilic substitution reaction, vapour pressure and molecular diameter of the toxicants.

Surface plasmon resonance immunosensor for the detection of Salmonella typhi antibodies in buffer and patient serum.

Surface plasmon resonance (SPR) immunosensor using 4-mercaptobenzoic acid (4-MBA) modified gold SPR chip was developed first time for the detection of flagellin specific antibodies of Salmonella typhi (S. typhi). Flagellin protein of S.

Removal of sulphur mustard, sarin and simulants on impregnated silica nanoparticles.

Silica nanoparticles of diameter, 24-75 nm and surface area, 875 m(2)/g were synthesized using aero-gel route. Thereafter, nanoparticles were impregnated with reactive chemicals, and used as reactive adsorbent to study the removal of toxic nerve and blister chemical warfare agents and their simulants from solutions. Trichloroisocyanuric acid impregnated silica nanoparticles showed the best performance and indicated physisorption followed by chemisorption/degradation of toxicants.

Effect of calcinations temperature of CuO nanoparticle on the kinetics of decontamination and decontamination products of sulphur mustard.

Present study investigates the potential of CuO nanoparticles calcined at different temperature for the decontamination of persistent chemical warfare agent sulphur mustard (HD) at room temperature (30 ± 2 °C). Nanoparticles were synthesized by precipitation method and characterized by using SEM, EDAX, XRD, and Raman Spectroscopy. Synthesized nanoparticles were tested as destructive adsorbents for the degradation of HD.

Significance of porous structure on degradatin of 2,2' dichloro diethyl sulphide and 2 chloroethyl ethyl sulphide on the surface of vanadium oxide nanostructure.

Degradation of the king of chemical warfare agent, 2,2' dichloro diethyl sulphide (HD), and its simulant 2 chloroethyl ethyl sulphide (CEES) were investigated on the surface of porous vanadium oxide nanotubes at room temperature (30 ± 2°C). Reaction kinetics was monitored by GC-FID technique and the reaction products were characterized by GC-MS. Data indicates that HD degraded faster relative to CEES inside the solid decontaminant compared to the reported liquid phase degradation of CEES and HD.

Supersensitive detection of T-2 toxin by the in situ synthesized π-conjugated molecularly imprinted nanopatterns. An in situ investigation by surface plasmon resonance combined with electrochemistry.

A π-conjugated molecularly imprinted polymer (MIP) with nanopatterns for T-2 toxin (T-2) was prepared on SPR chip by in situ electropolymerization of 3-aminophenylboronicacid (3-APBA) with T-2. The complete removal of T-2 from polymer was confirmed in situ by SPR and EIS and also ex situ by SEM, EDAX, fluorescence microscopy and Raman spectroscopy. SEM image of T-2 MIP exhibited nanopatterns due to imprinting of T-2.

Photocatalytic inactivation of spores of Bacillus anthracis using titania nanomaterials.

Studies on photocatalytic inactivation of spores of Bacillus anthracis have been carried out using nanosized titania materials and UVA light or sun light. Results demonstrated pseudo first order behaviour of spore inactivation kinetics. The value of kinetic rate constant increased from 0.

Decontamination of Yperite using mesoporous mixed metal oxide nanocrystals.

Mixed metal oxide nanocrystals of AP-Al(2)O(3), AP-Al(2)O(3)-Fe(2)O(3), AP-Al(2)O(3)-V(2)O(5) and AP-Al(2)O(3)-CuO have been prepared by aerogel process. XRD data of prepared materials revealed the formation of nanocrystals with a size range of 3-15 nm diameters. N(2) BET investigations on these materials revealed larger values of surface area ranging from 350 to 540 m(2)/g.

Kinetics of adsorptive removal of DEClP and GB on impregnated Al2O3 nanoparticles.

Nanoparticles of AP-Al(2)O(3) (aero-gel produced alumina) have been produced by an alkoxide based synthesis involving aluminum powder, methanol, toluene and water. Thus produced alumina nanoparticles were characterized and the data indicated the formation of nanoparticles of alumina in the size range of 2-30 nm with high surface area (375 m(2)/g). Thereafter, these nanoparticles were impregnated with reactive chemicals.

In-situ degradation of sulphur mustard using (1R)-(-)-(camphorylsulphonyl) oxaziridine impregnated adsorbents.

Bis-2-chloroethyl sulphide (sulphur mustard or HD) is an extremely toxic and persistent chemical warfare agent. For in-situ degradation of HD and its analogues (simulants), i.e.

Kinetics of adsorption of 2-chloroethylethylsulphide on Al2O3 nanoparticles with and without impregnants.

Alumina nanoparticles in the size range of 2-30 nm and surface area 375 m(2)/g were synthesized using aerogel route and then characterized using N(2)-BET, SEM, TEM, XRD, FTIR and TGA techniques. Thereafter, these were impregnated with reactive chemicals and tested for their potential by conducting studies on kinetics of adsorption of 2-chloroethylethylsulphide (2-CEES) under static conditions. Kinetics was studied using linear driving force and Fickian diffusion model.

Molecularly imprinted nanopatterns for the recognition of biological warfare agent ricin.

Molecularly imprinted polymer (MIP) for biological warfare agent (BWA) ricin was synthesized using silanes in order to avoid harsh environments during the synthesis of MIP. The synthesized MIP was utilized for the recognition of ricin. The complete removal of ricin from polymer was confirmed by fluorescence spectrometer and SEM-EDAX.