Single-molecule profiling of per- and polyfluoroalkyl substances by cyclodextrin mediated host-guest interactions within a biological nanopore.

Biological nanopores are increasingly used in molecular sensing due to their single-molecule sensitivity. The detection of per- and polyfluoroalkyl substances (PFAS) like perfluorooctanoic acid and perfluorooctane sulfonic acid is critical due to their environmental prevalence and toxicity. Here, we investigate selective interactions between PFAS and four cyclodextrin (CD) variants (α-, β-, γ-, and 2-hydroxypropyl-γ-CD) within an α-hemolysin nanopore.

Structure, orientation, and dynamics of per- and polyfluoroalkyl substance (PFAS) surfactants at the air-water interface: Molecular-level insights.

Hypothesis: Understanding the intricate molecular-level details of toxic per- and polyfluoroalkyl substances (PFAS) partitioning to the air-water interface holds paramount importance in evaluating their fate and transport, as well as for finding safer alternatives for various applications, including aqueous film forming foams. The behavior of these substances at interfaces strongly depends on molecular architecture, chemistry, and concentration, which define molecular packing, self-assembly, interfacial diffusion, and the surface tension.

Simulations: Modeling of three PFAS surfactants, namely, longer-tail (perfluorooctanoate (PFOA)) and shorter-tail (perfluorobutanoate (PFBA) and 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy) propanoate (GenX)) has been conducted using atomistic molecular dynamics simulations.

Interaction of Short-Chain PFAS with Polycationic Gels: How Much Fluorination is Necessary for Efficient Adsorption?

The short-chain per- and polyfluorinated alkyl substances (PFAS), introduced to replace the legacy PFAS compounds, turned out to be as toxic and harmful as their longer-chain predecessors and even harder to sequester from contaminated water sources. In this work, molecular dynamics (MD) simulations are employed to investigate the adsorption mechanism of GenX, a representative compound for short-chain PFAS, on a polycationic hydrogel with various extents of fluorination in its backbone and cross-linkers. Simulations indicate that the presence of fluorinated segments next to cationic groups in the polymer gel structure provides the most efficient environment for GenX adsorption.

Aqueous Electrolytes Reinforced by Mg and Ca Ions for Highly Reversible Fe Metal Batteries.

Iron (Fe) metal batteries, such as Fe-ion batteries and all Fe flow batteries, are promising energy storage technologies for grid applications due to the extremely low cost of Fe and Fe salts. Nonetheless, the cycle life of Fe metal batteries is poor primarily due to the low Coulombic efficiency of the Fe deposition/stripping reaction. Current aqueous electrolytes based on Fe chloride or sulfate salts can only operate at a Coulombic efficiency of <91% under mild operation conditions (<5 mA/cm), largely due to undesired hydrogen evolution reaction (HER).

Green Polymer Electrolytes Based on Polycaprolactones for Solid-State High-Voltage Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) have attracted considerable attention for high energy solid-state lithium metal batteries (LMBs). In this work, potentially ecofriendly, solid-state poly(ε-caprolactone) (PCL)-based star polymer electrolytes with cross-linked structures (xBt-PCL) are introduced that robustly cycle against LiNi Mn Co O (NMC622) composite cathodes, affording long-term stability even at higher current densities. Their superior features allow for sufficient suppression of dendritic lithium deposits, as monitored by Li solid-state NMR.

GenX in water: Interactions and self-assembly.

2,3,3,3-tetrafluoro-2-(heptafluoropropoxy) propanoate, a.k.a.

Structure and composition of mixed micelles formed by nonionic block copolymers and ionic surfactants in water determined by small-angle neutron scattering with contrast variation.

Hypothesis: Complex fluids comprising polymers and surfactants exhibit interesting properties which depend on the overall composition and solvent quality. The ultimate determinants of the macroscopic properties are the nano-scale association domains. Hence it is important to ascertain the structure and composition of the domains, and how they respond to the overall composition.

Structure and Interactions in Perfluorooctanoate Micellar Solutions Revealed by Small-Angle Neutron Scattering and Molecular Dynamics Simulations Studies: Effect of Urea.

The self-assembly of surfactants in aqueous solution can be modulated by the presence of additives including urea, which is a well-known protein denaturant and also present in physiological fluids and agricultural runoff. This study addresses the effects of urea on the structure of micelles formed in water by the fluorinated surfactant perfluoro--octanoic acid ammonium salt (PFOA). Analysis of small-angle neutron scattering (SANS) experiments and atomistic molecular dynamics (MD) simulations provide consensus strong evidence for the direct mechanism of urea action on micellization: urea helps solvate the hydrophobic micelle core by localizing at the surface of the core in the place of some water molecules.

Controlling the self-assembly of perfluorinated surfactants in aqueous environments.

Surface active per- and polyfluoroalkyl substances (PFAS) released in the environment generate great concern in the US and worldwide. The sequestration of PFAS amphiphiles from aqueous media can be limited by their strong tendency to form micelles that plug the pores in the adsorbent material, rendering most of the active surface inaccessible. A joint experimental and simulation approach has been used to investigate the structure of perfluorooctanoate ammonium (PFOA) micelles in aqueous solutions, focusing on the understanding of ethanol addition on PFOA micelle formation and structure.

Small Groups, Big Impact: Eliminating Li Traps in Single-Ion Conducting Polymer Electrolytes.

Single-ion conducting polymer electrolytes exhibit great potential for next-generation high-energy-density Li metal batteries, although the lack of sufficient molecular-scale insights into lithium transport mechanisms and reliable understanding of key correlations often limit the scope of modification and design of new materials. Moreover, the sensitivity to small variations of polymer chemical structures (e.g.

Transport Properties of Waxy Crude Oil: A Molecular Dynamics Simulation Study.

To study the effects of paraffin on viscosity of waxy crude oil and transport properties of small molecules, light and waxy crude oil models were investigated at atmospheric pressure and 293-323 K temperature range using atomistic molecular dynamics simulations. The optimized parameters for liquid simulations all-atom (OPLS-AA) and atomistic polarizable potential for liquids, electrolytes, and polymers (APPLE&P) force fields were employed. The self-diffusion coefficients, viscosity, and paraffin configurations were compared for two oil models and between the two employed force fields.

First-principles experimental demonstration of ferroelectricity in a thermotropic nematic liquid crystal: Polar domains and striking electro-optics.

We report the experimental determination of the structure and response to applied electric field of the lower-temperature nematic phase of the previously reported calamitic compound 4-[(4-nitrophenoxy)carbonyl]phenyl2,4-dimethoxybenzoate (RM734). We exploit its electro-optics to visualize the appearance, in the absence of applied field, of a permanent electric polarization density, manifested as a spontaneously broken symmetry in distinct domains of opposite polar orientation. Polarization reversal is mediated by field-induced domain wall movement, making this phase ferroelectric, a 3D uniaxial nematic having a spontaneous, reorientable polarization locally parallel to the director.

Molecular dynamics simulations of isothermal reactions in Al/Ni nanolaminates.

Molecular dynamics simulations of reactions in Al/Ni layered systems have been carried out under isothermal conditions for a wide range of temperatures and several system sizes. An embedded atom method potential, known to reasonably reproduce the phase behavior of Al/Ni, was employed. Simulations revealed reaction mechanisms involving an initial fast process and much slower more complex longer-time reactions.

Molecular Dynamics Simulations of Ionic Liquids and Electrolytes Using Polarizable Force Fields.

Many applications in chemistry, biology, and energy storage/conversion research rely on molecular simulations to provide fundamental insight into structural and transport properties of materials with high ionic concentrations. Whether the system is comprised entirely of ions, like ionic liquids, or is a mixture of a polar solvent with a salt, e.g.

Multiscale Modeling of Structure, Transport and Reactivity in Alkaline Fuel Cell Membranes: Combined Coarse-Grained, Atomistic and Reactive Molecular Dynamics Simulations.

In this study, molecular dynamics (MD) simulations of hydrated anion-exchange membranes (AEMs), comprised of poly(-phenylene oxide) (PPO) polymers functionalized with quaternary ammonium cationic groups, were conducted using multiscale coupling between three different models: a high-resolution coarse-grained (CG) model; Atomistic Polarizable Potential for Liquids, Electrolytes and Polymers (APPLE&P); and ReaxFF. The advantages and disadvantages of each model are summarized and compared. The proposed multiscale coupling utilizes the strength of each model and allows sampling of a broad spectrum of properties, which is not possible to sample using any of the single modeling techniques.

How efficient is Li ion transport in solvate ionic liquids under anion-blocking conditions in a battery?

An experimental analysis based on very-low-frequency (VLF) impedance spectra and the Onsager reciprocal relations is combined with advanced analysis of dynamic correlations in atomistic molecular simulations in order to investigate Li+ transport in solvate ionic liquids (SILs). SILs comprised of an equimolar mixture of a lithium salt with glyme molecules are considered as a promising class of highly concentrated electrolytes for future Li-ion batteries. Both simulations and experiments on a prototypical Li-bis(trifluoromethanesulfonyl)imide (TFSI) salt/tetraglyme mixture show that while the ionic conductivity and the Li+ transport number are quite high, the Li+ transference number under 'anion-blocking conditions' is extremely low, making these electrolytes rather inefficient for battery applications.

The 1-ethyl-3-methylimidazolium bis(trifluoro-methylsulfonyl)-imide ionic liquid nanodroplets on solid surfaces and in electric field: A molecular dynamics simulation study.

Atomistic molecular dynamics simulations were conducted to study the wetting states of 1-ethyl-3-methylimidazolium bis(trifluoro-methylsulfonyl)-imide ionic liquid (IL) nanodroplets on surfaces with different strengths of van der Waals (VDW) interactions and in the presence of an electric field. By adjusting the depth of Lennard-Jones potential, the van der Waals interaction between the solid surface and ionic liquid was systematically varied. The shape of the droplets was analyzed to extract the corresponding contact angle utilized to characterize wetting states of the nanodroplets.

Charge Transport in [Li(tetraglyme)][bis(trifluoromethane) sulfonimide] Solvate Ionic Liquids: Insight from Molecular Dynamics Simulations.

Molecular dynamics simulations using fully atomistic polarizable force field have been performed on solvate ionic liquids (SILs), comprised of tetraglyme (G4) solvent molecules, Li cations, and bis(trifluoromethane) sulfonimide (TFSI) anions, [Li(G4)][TFSI]. The SILs with equimolar salt:G4 composition were investigated in the 303-373 K temperature range, whereas several systems with lower salt concentrations were investigated at 373 K. The simulations using polarizable force field demonstrate very good consistency of structural and dynamic properties with experimental data.

Supramolecular Self-Assembly of Methylated Rotaxanes for Solid Polymer Electrolyte Application.

Li-conducting solid polymer electrolytes (SPEs) obtained from supramolecular self-assembly of trimethylated cyclodextrin (TMCD), poly(ethylene oxide) (PEO), and lithium salt are investigated for application in lithium-metal batteries (LMBs) and lithium-ion batteries (LIBs). The considered electrolytes comprise nanochannels for fast lithium-ion transport formed by CD threaded on PEO chains. It is demonstrated that tailored modification of CD beneficially influences the structure and transport properties of solid polymer electrolytes, thereby enabling their application in LMBs.

Role of cationic groups on structural and dynamical correlations in hydrated quaternary ammonium-functionalized poly(p-phenylene oxide)-based anion exchange membranes.

Extensive atomistic molecular dynamics (MD) simulations employing a polarizable force field have been conducted to study hydrated anion exchange membranes comprised of a poly(p-phenylene oxide) (PPO) homopolymer functionalized with quaternary ammonium cationic side groups and hydroxide anions. Representative membranes with different cationic structures have been investigated to study correlations between polymer architecture, morphology and transport properties of hydrated membranes. Specifically, hydrated polymers with five different quaternary ammonium cationic groups (R1: -CH3, R2: -C2H5, R3: -C3H7, R4: -C6H13 and R5: -C4H8OCH3) and degree of functionalization of 50% were investigated at three hydration levels (λ = Nwater/Ncation = 5, 10 and 17).

Understanding transport mechanisms in ionic liquid/carbonate solvent electrolyte blends.

To unravel mechanistic details of the ion transport in liquid electrolytes, blends of the ionic liquid (IL) 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Pyr14TFSI), ethylene carbonate (EC) and dimethyl carbonate (DMC) with the conducting salts lithium hexafluorophosphate (LiPF6) and lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) were investigated as a function of the IL concentration. Electrochemical impedance, Pulsed Field Gradient Nuclear Magnetic Resonance (PFG NMR) and Raman spectroscopy supported by Molecular Dynamics (MD) simulations allowed the structural and dynamic correlations of the ion motions to be probed. Remarkably, we identified that though the individual correlations among different ion types exhibit a clear concentration dependence, their net effect is nearly constant throughout the entire concentration range, resulting in approximately equal transport and transference numbers, despite a monitored cross-over from carbonate-based lithium coordination to a TFSI-based ion coordination.

Grotthuss versus Vehicular Transport of Hydroxide in Anion-Exchange Membranes: Insight from Combined Reactive and Nonreactive Molecular Simulations.

Combined reactive and nonreactive polarizable molecular dynamics simulations were used to probe the transport mechanisms of hydroxide in hydrated anion-exchange membranes (AEMs) composed of poly(p-phenylene oxide) functionalized with the quaternary ammonium cationic groups. The direct mapping of membrane morphologies between two models allowed us to investigate the contributions of vehicular and Grotthuss mechanisms in hydroxide motion and correlate these mechanisms with the details of local structure. In AEMs with nonblocky polymer structure, where anion transport occurs through narrow (subnanometer size) percolating water channels, simulations indicate the importance of the Grotthuss mechanism.

Application of Screening Functions as Cutoff-Based Alternatives to Ewald Summation in Molecular Dynamics Simulations Using Polarizable Force Fields.

The range-dependent screening of the charge-charge, charge-induced dipole, and induced dipole-induced dipole interactions was examined for a variety of liquids modeled using polarizable force fields. A cutoff-based method for calculation of the electrostatic interactions in molecular dynamics (MD) is presented as an alternative to Ewald-type summation for simulations of the disordered materials modeled using many-body polarizable force fields with permanent charges and induced point dipoles. The proposed approach was tested on bulk water, room-temperature ionic liquids, and solutions of ions in polar solvents.

Structural and Dynamical Properties of Tetraalkylammonium Bromide Aqueous Solutions: A Molecular Dynamics Simulation Study Using a Polarizable Force Field.

Understanding the behavior of aqueous solutions containing tetraalkylammonium (TAA) cations is of great significance in a number of applications, including polymer membranes for fuel cells. In this work, a polarizable force field has been used to perform atomistic molecular dynamics (MD) simulations of aqueous solutions containing tetramethylammonium (TMA) or tetrabutylammonium (TBA) cations and Br counterions. Extensive MD simulations of TMA-Br/water and TBA-Br/water systems were conducted as a function of solution composition (ion pair:water molar ratios of 1:10, 1:20, 1:30, 1:63, and 1:500) at atmospheric pressure and 298 K.

Molecular Dynamics Simulation of Alkylthiol Self-Assembled Monolayers on Liquid Mercury.

We report computer simulation of the self-assembly of alkylthiols on the surface of liquid mercury. Here we focus mainly on the alkylthiol behavior on mercury as a function of the surfactant surface coverage, which we study by means of large-scale molecular dynamics simulations of the equilibrium structure at room temperature. The majority of the presented results are obtained for octa- and dodecanethiol surfactants.