Semiochemical delivery systems based on natural polymers to attract sand flies (Diptera: Psychodidae).

Background: The successful use of semiochemicals to attract insects to traps is based on research on the most suitable compounds and their release profiles over time. Based on the group's promising results, matrices with a more adequate release profile and more eco-friendly properties for the release of 1-hexanol were developed. To use a more suitable prototype in the field, the most promising systems were added to a capsule and evaluated in a wind tunnel.

Solid dispersions based on chitosan/hypromellose phthalate blends to modulate pharmaceutical properties of zidovudine.

Zidovudine (AZT) has been widely used alone or in combination with other antiretroviral drugs for the treatment of human immunodeficiency virus. Its erratic oral bioavailability necessitates frequent administration of high doses, resulting in severe side effects. In this study, the design of mucoadhesive solid dispersions (SDs) based on chitosan (CS) and hypromellose phthalate (HP) was rationalized as a potential approach to modulate AZT physicochemical and pharmaceutical properties.

Nose-to-brain co-delivery of drugs for glioblastoma treatment using nanostructured system.

Mutations on the epidermal growth factor receptor (EGFR), induction of angiogenesis, and reprogramming cellular energetics are all biological features acquired by tumor cells during tumor development, and also known as the hallmarks of cancer. Targeted therapies that combine drugs that are capable of acting against such concepts are of great interest, since they can potentially improve the therapeutic efficacy of treatments of complex pathologies, such as glioblastoma (GBM). However, the anatomical location and biological behavior of this neoplasm imposes great challenges for targeted therapies.

Ionic Cross-Linking as a Strategy to Modulate the Properties of Oral Mucoadhesive Microparticles Based on Polysaccharide Blends.

Polymer blends of gellan gum (GG)/retrograded starch(RS) and GG/pectin (P) were cross-linked with calcium, aluminum, or both to prepare mucoadhesive microparticles as oral carriers of drugs or nano systems. Cross-linking with different cations promoted different effects on each blend, which can potentially be explored as novel strategies for modulating physical-chemical and mucoadhesive properties of microparticles. Particles exhibited spherical shapes, diameters from 888 to 1764 µm, and span index values lower than 0.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review.

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability.

Computational and experimental approaches for chitosan-based nano PECs design: Insights on a deeper comprehension of nanostructure formation.

Nanostructured polyelectrolyte complexes (nano PECs) based on biopolymers are an important technological strategy to target drugs to the action and/or absorption site in a more effective way. In this work, computational studies were performed to predict the ionization, spatial arrangement and interaction energies of chitosan (CS), hyaluronic acid (HA), and hypromellose phthalate (HP), for the design of nano PEC carriers for methotrexate (MTX). The optimal pH range (5.

Design of chitosan-based particle systems: A review of the physicochemical foundations for tailored properties.

Chitosan-based particles are widely proposed as biocompatible drug delivery systems with mucoadhesive and permeation enhancing properties. However, strategies on how to modulate the intended biological responses are still scarce. Considering that particle properties affect the biological outcome, the rational design of the synthesis variables should be proposed to engineer drug delivery systems with improved biological performance.

Modulating chitosan-PLGA nanoparticle properties to design a co-delivery platform for glioblastoma therapy intended for nose-to-brain route.

Nose-to-brain delivery is a promising approach to target drugs into the brain, avoiding the blood-brain barrier and other drawbacks related to systemic absorption, and enabling an effective and safer treatment of diseases such as glioblastoma (GBM). Innovative materials and technologies that improve residence time in the nasal cavity and modulate biological interactions represent a great advance in this field. Mucoadhesive nanoparticles (NPs) based on poly(lactic-co-glycolic acid) (PLGA) and oligomeric chitosan (OCS) were designed as a rational strategy and potential platform to co-deliver alpha-cyano-4-hydroxycinnamic acid (CHC) and the monoclonal antibody cetuximab (CTX) into the brain, by nasal administration.

Mucin-polysaccharide interactions: A rheological approach to evaluate the effect of pH on the mucoadhesive properties.

The design of mucoadhesive drug delivery systems (DDS) based on polysaccharides at nanoscale or microscale is a relevant technological strategy for the mucosal delivery of several drugs. Findings about the potential mucoadhesive ability of these materials and the mechanisms that drive such interactions represents an important advance for the rational modulation of these properties, according to specific uses. The potential mucoadhesive abilities of gellan gum (GG) and retrograded starch (RS) were investigated at pH 1.

Oral nanoparticles based on gellan gum/pectin for colon-targeted delivery of resveratrol.

Nanoparticles based on gellan gum/pectin blends were designed for colon-targeted release of resveratrol (RES). Their impact on drug release rates and permeability were evaluated using Caco-2 cell model and mucus secreting triple co-culture model. Polymeric nanoparticles (PNP) were successfully prepared by nebulization/ionotropic gelation, achieving high drug loading (>80%).

Mucoadhesive films based on gellan gum/pectin blends as potential platform for buccal drug delivery.

Films of gellan gum:pectin blends were prepared by solvent casting method. Gellan gum:pectin mass ratios were varied (4:1; 1:1; 1:4) at different concentrations (3% or 4%) and glycerol was used as plasticizer (1 or 2%). The films were thin (18-30 µm), translucent, flexible, and homogeneous.

Gellan Gum/Pectin Beads Are Safe and Efficient for the Targeted Colonic Delivery of Resveratrol.

This work addresses the establishment and characterization of gellan gum:pectin (GG:P) biodegradable mucoadhesive beads intended for the colon-targeted delivery of resveratrol (RES). The impact of the polymer carrier system on the cytotoxicity and permeability of RES was evaluated. Beads of circular shape (circularity index of 0.

Retrograded starch/pectin coated gellan gum-microparticles for oral administration of insulin: A technological platform for protection against enzymatic degradation and improvement of intestinal permeability.

Gellan gum microparticles coated with colon-specific films based on retrograded starch and pectin was developed for enhancing the oral release of insulin (INS). The system developed promoted an impressive protection of INS (80%) after 120 min of incubation with trypsin and alpha-chymotrypsin, while only 3% of free INS remained intact after the same time, possibility due to the calcium chelating activity of the polymers in inhibiting the proteolytic activity. In vitro INS release in media simulating the gastrointestinal portions revealed a pH-dependent behavior, as well as the significance of the coating in lowering the release rates in relation to their counterparts.

Effect of in situ modification of bacterial cellulose with carboxymethylcellulose on its nano/microstructure and methotrexate release properties.

Bacterial cellulose/carboxymethylcelullose (BC/CMC) biocomposites with different DS-CMC (DS from 0.7 to 1.2) were developed in order to evaluate their impact as a drug delivery system.

Mucoadhesive nanostructured polyelectrolytes complexes modulate the intestinal permeability of methotrexate.

Nanostructured polyelectrolytes complexes (nano PECs) loaded with methotrexate (MTX) were obtained by the polyelectrolyte complexation of chitosan (CS) and hyaluronic acid (HA), further incorporating hypromellose phthalate (HP). The mean diameter of nano PECs ranged from 325 to 458nm, with a narrow size distribution. Zeta potential was close to +30mV, decreasing to +21mV after the incorporation of HP, a range of values that favour the physical stability of system as the interaction with cationic biological membranes.

Cellulose triacetate films obtained from sugarcane bagasse: Evaluation as coating and mucoadhesive material for drug delivery systems.

Cellulose triacetate (CTA) films were produced from cellulose extracted from sugarcane bagasse. The films were characterized using scanning electron microscopy (SEM), water vapor permeability (WVP), mechanical properties (MP), enzymatic digestion (ED), and mucoadhesive properties evaluation (MPE). WVP showed that more concentrated films have higher values; asymmetric films had higher values than symmetric films.

Gellan gum microspheres crosslinked with trivalent ion: effect of polymer and crosslinker concentrations on drug release and mucoadhesive properties.

Gellan gum microspheres were obtained by ionotropic gelation technique, using the trivalent ion Al(3+). The percentage of entrapment efficiency ranged from 48.76 to 87.

Preparation and Characterization of Amylose Inclusion Complexes for Drug Delivery Applications.

Amylose complexes with nimesulide (NMS) and praziquantel (PZQ) were prepared by a simple and low cost method, so that high yield (>57%) and drug content (up to 68.16%) were achieved. The influence of drug:polymer ratio, temperature, and presence of palmitic acid on the complexes properties was evaluated.

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs.

Gellan gum/pectin beads were prepared by ionotropic gelation, using Al(3+) as crosslinker. High yield (92.76%) and entrapment efficiency (52.

Films from resistant starch-pectin dispersions intended for colonic drug delivery.

Free films were obtained by the solvent casting method from retrograded starch-pectin dispersions at different polymer proportions and concentrations with and without plasticizer. Film forming dispersions were characterized according to their hardness, birefringence and rheological properties. The polymer dispersions showed a predominantly viscous behavior (G″>G') and the absence of plasticizers lead to building of stronger structures, while the occurrence of Maltese crosses in the retrograded dispersions indicates the occurrence of a crystalline organization.

Blends of cross-linked high amylose starch/pectin loaded with diclofenac.

Polymers blends represent an important approach to obtain materials with modulated properties to reach different and desired properties in designing drug delivery systems in order to fulfill therapeutic needs. The aim of this work was to evaluate the influence of drug loading and polymer ratio on the physicochemical properties of microparticles of cross-linked high amylose starch-pectin blends loaded with diclofenac for further application in controlled drug delivery systems. Thermal analysis and X-ray diffractograms evidenced the occurrence of drug-polymer interactions and the former pointed also to an increase in thermal stability due to drug loading.

Effect of drying technique on some physical properties of cross-linked high amylose/pectin mixtures.

Polymers mixtures as well as cross-linking reactions are approaches that have been used successfully to modulate the polymers characteristics in order to improve the control over drug release rate. High amylose and pectin are polysaccharides frequently used to prepare drug delivery systems. Since the drying technique can strongly influence the properties of such systems, the aim of this work was to characterize high amylose/pectin mixtures cross-linked with sodium trimetaphosphate and dried by different techniques - oven and lyophilization.

Preparation and characterization of free films of high amylose/pectin mixtures cross-linked with sodium trimetaphosphate.

High amylose and pectin were mixed at 1:1 mass ratio and cross-linked with sodium trimetaphosphate (STMP) in alkaline medium. Films were prepared from aqueous dispersions of these cross-linked polymer blend at three different concentrations (3, 4 and 5%), by solvent casting method. Characterization of the films included thickness, surface morphology, water uptake, water vapor permeability (WVP), tensile strength measurements and enzymatic digestion.

Physical properties of pectin-high amylose starch mixtures cross-linked with sodium trimetaphosphate.

Pectin-high amylose starch mixtures (1:4; 1:1; 4:1) were cross-linked at different degrees and characterized by rheological, thermal, X-ray diffraction and NMR analyses. For comparison, samples without cross-linker addition were also prepared and characterized. Although all samples behaved as gels, the results evidenced that the phosphorylation reaction promotes the network strengthening, resulting in covalent gels (highest critical stress, G' and recovery %).