Unveiling Intrinsic Bulk Photovoltaic Effect in Atomically Thin ReS.

The bulk photovoltaic effect (BPVE) offers a promising avenue to surpass the efficiency limitations of current solar cell technology. However, disentangling intrinsic and extrinsic contributions to photocurrent remains a significant challenge. Here, we fabricate high-quality, lateral devices based on atomically thin ReS with minimal contact resistance, providing an optimal platform for distinguishing intrinsic bulk photovoltaic signals from other extrinsic photocurrent contributions originating from interfacial effects.

Validity and Reliability of 2 Cirrus Optical Coherence Tomography Procedures for Measuring Objective Ocular Torsion.

Purpose: Torsional eye position by the disc-fovea angle (DFA) is a relevant objective parameter in vertical strabismus. DFA measurement with optical coherence tomography (OCT) has proven to be a good alternative to the gold standard measurement in fundus photography. Our study aims to analyze the validity and reliability of 2 undescribed Cirrus high-definition OCT (HD-OCT; Carl Zeiss Meditec) methods that offer clinical advantages for measuring objective cycloposition in normal patients compared with Spectralis spectral-domain OCT (Heidelberg Engineering) and the reference method.

Pesticides and winemaking: A comprehensive review of conventional and emerging approaches.

The use of pesticides in viticulture may play a crucial role in ensuring the health and quality of grapes. This review analyzes the most common pesticides used, illustrating their classification and toxicity, and their variations throughout the winemaking process. Fungicides are generally harmless or mildly toxic, whereas insecticides are classified as either highly or moderately hazardous.

Enhanced Superconductivity in 2H-TaS Devices through in Situ Molecular Intercalation.

The intercalation of guest species into the gap of van der Waals materials often leads to the emergence of intriguing phenomena such as superconductivity. While intercalation-induced superconductivity has been reported in several bulk crystals, reaching a zero-resistance state in flakes remains challenging. Here, we show a simple method for enhancing the superconducting transition in tens-of-nanometers thick 2H-TaS crystals contacted by gold electrodes through in situ intercalation.

Strain in Hybrid Organic-Inorganic Metal Halide Perovskites Microstructures by Numerical Simulations.

Hybrid organic-inorganic metal halide perovskites (HOIPs) are promising materials for optoelectronics applications. Their optical and electrical properties can be controlled by strain engineering, that results from application of local elastic deformation or deposition on pre-patterned substrates acquiring a conformal 3D shape. Most interesting, their mechanical properties depend on their crystal structure, composition and dimensionality.

Microscale Chiral Rectennas for Energy Harvesting.

Wireless radiofrequency rectifiers have the potential to power the billions of "Internet of Things" (IoT) devices currently in use by effectively harnessing ambient electromagnetic radiation. However, the current technology relies on the implementation of rectifiers based on Schottky diodes, which exhibit limited capabilities for high-frequency and low-power applications. Consequently, they require an antenna to capture the incoming signal and amplify the input power, thereby limiting the possibility of miniaturizing devices to the millimeter scale.

Lifestyle Factors in Myopic Spanish Children.

Background: Childhood myopia represents a global concern with increasing prevalence in recent decades. Lifestyle factors significantly impact myopia.

Aim: To evaluate lifestyle factors in myopic children from a metropolitan area in Europe.

Odd Nonlinear Conductivity under Spatial Inversion in Chiral Tellurium.

Electrical transport in noncentrosymmetric materials departs from the well-established phenomenological Ohm's law. Instead of a linear relation between current and electric field, a nonlinear conductivity emerges along specific crystallographic directions. This nonlinear transport is fundamentally related to the lack of spatial inversion symmetry.

Unveiling Coformulants in Plant Protection Products by LC-HRMS Using a Polyhydroxy Methacrylate Stationary Phase.

A polyhydroxy methacrylate-based stationary reversed phase was used for the determination of coformulants in 20 plant protection products (PPPs). These samples were analyzed by liquid chromatography coupled to Q-Orbitrap high-resolution mass spectrometry (LC-Q-Orbitrap-HRMS) in full-scan MS and data-dependent acquisition (ddMS) modes. A total of 92 coformulants were tentatively identified in these formulations by nontargeted and unknown analyses.

Suspect screening of pesticide co-formulants in fruits, vegetables and leaves by liquid and gas chromatography coupled to high resolution mass accuracy spectrometry: Potential impact on human health.

Vegetables can contain co-formulants derived from the use of plant protection products (PPPs) in crops. Thus, in the current study co-formulants were determined in different fruits and vegetables and their leaves by gas and liquid chromatography coupled to Q-Orbitrap high-resolution mass spectrometry (GC-Q-Orbitrap and LC-Q-Orbitrap-MS). A total of 37 co-formulants were tentatively identified, and among them, 12 compounds were quantified by LC-Q-Orbitrap-MS and 9 by GC-Q-Orbitrap-MS.

Mixed Organic Cations Promote Ambient Light-Induced Formation of Metallic Lead in Lead Halide Perovskite Crystals.

One major concern toward the performance and stability of halide perovskite-based optoelectronic devices is the formation of metallic lead that promotes nonradiative recombination of charge carriers. The origin of metallic lead formation is being disputed whether it occurs during the perovskite synthesis or only after light, electron, or X-ray beam irradiation or thermal annealing. Here, we show that the quantity of metallic lead detected in perovskite crystals depends on the concentration and composition of the precursor solution.

Gate-Tunable Spin Hall Effect in an All-Light-Element Heterostructure: Graphene with Copper Oxide.

Graphene is a light material for long-distance spin transport due to its low spin-orbit coupling, which at the same time is the main drawback for exhibiting a sizable spin Hall effect. Decoration by light atoms has been predicted to enhance the spin Hall angle in graphene while retaining a long spin diffusion length. Here, we combine a light metal oxide (oxidized Cu) with graphene to induce the spin Hall effect.

Lower tear meniscus height measured by optical coherence tomography in children.

Introduction: While optical coherence tomography (OCT) measurements of the lower tear meniscus height (LTMH) have been reported in adults, here we obtained LTMH measurements through Fourier Domain OCT in healthy children and compared these with values obtained in healthy adults.

Methods: Participants were children 7-17 years of age and a control group of adults 20-40 years of age. Inclusion criteria were no abnormal eye conditions or the use of contact lenses.

Bioconversion of Cheese Whey and Food By-Products by into Fucoxanthin and n-3 Lc-PUFA through a Biorefinery Approach.

This study investigates the potential of utilizing three food wastes: cheese whey (CW), beet molasses (BM), and corn steep liquor (CSL) as alternative nutrient sources for the cultivation of the diatom , a promising source of polyunsaturated eicosapentaenoic acid (EPA) and the carotenoid fucoxanthin. The CW media tested did not significantly impact the growth rate of ; however, CW hydrolysate significantly enhances cell growth. BM in cultivation medium enhances biomass production and fucoxanthin yield.

Charge Carrier Dynamics in Colloidally Synthesized Monolayer MoX Nanosheets.

Transition metal dichalcogenides (TMDs) are nanostructured semiconductors with prospects in optoelectronics and photocatalysis. Several bottom-up procedures to synthesize such materials have been developed yielding colloidal transition metal dichalcogenides (c-TMDs). Where such methods initially yielded multilayered sheets with indirect band gaps, recently, also the formation of monolayered c-TMDs became possible.

A colloidal route to semiconducting tungsten disulfide nanosheets with monolayer thickness.

Transition metal dichalcogenides (TMDs) are a class of materials that have been extensively studied in the last decade, with molybdenum disulfide (MoS) being the main protagonist. Typically, the interesting TMD properties, a direct band gap transition, or broken inversion symmetry, are only present in monolayer thick TMDs, and in the absence of strong lateral confinement, we require different materials or alloys thereof when we want to obtain TMDs with varying (direct) band gap energies. With this in mind, tungsten disulfide (WS) is emerging as a direct competitor of MoS due to its similar properties but larger band gap energy.

Solid State Fermentation of Olive Leaves as a Promising Technology to Obtain Hydroxytyrosol and Elenolic Acid Derivatives Enriched Extracts.

Extraction of valuable bioactive compounds from olive leaves is a hot topic and the use of sustainable and green technologies is mandatory in terms of circular economy. In this way, the use of fermentation technologies showed very interesting results in terms of phenolic compound recovery. Because of that in this work the use of solid state fermentations, as valuable tool to improve the phenolic extraction has been checked.

Development of an Effective Sonotrode Based Extraction Technique for the Recovery of Phenolic Compounds with Antioxidant Activities in Cherimoya Leaves.

The leaves of Mill (cherimoya) are a potential source of phenolic compounds that have been shown to have beneficial properties. Therefore, this study focuses on establishing an ultrasonic-assisted extraction of phenolic compounds in cherimoya leaves using a sonotrode. For that purpose, a Box-Behnken design based on a response surface methodology (RSM) was used to optimize factors, such as amplitude, extraction time and solvent composition to obtain the maximum content of phenolic compounds by HPLC-MS and the maximum in-vitro antioxidant activity by DPPH, ABTS and FRAP assays in 'Fino de Jete' cherimoya leaves.

Tailoring Photoluminescence by Strain-Engineering in Layered Perovskite Flakes.

Strain is an effective strategy to modulate the optoelectronic properties of 2D materials, but it has been almost unexplored in layered hybrid organic-inorganic metal halide perovskites (HOIPs) due to their complex band structure and mechanical properties. Here, we investigate the temperature-dependent microphotoluminescence (PL) of 2D (CHCHCHNH)CsPbBr HOIP subject to biaxial strain induced by a SiO ring platform on which flakes are placed by viscoelastic stamping. At 80 K, we found that a strain of <1% can change the PL emission from a single peak (unstrained) to three well-resolved peaks.

Sulfonated NbS-based proton-exchange membranes for vanadium redox flow batteries.

In this work, novel proton-exchange membranes (PEMs) based on sulfonated poly(ether ether ketone) (SPEEK) and two-dimensional (2D) sulfonated niobium disulphide (S-NbS) nanoflakes are synthesized by a solution-casting method and used in vanadium redox flow batteries (VRFBs). The NbS nanoflakes are produced by liquid-phase exfoliation of their bulk counterpart and chemically functionalized with terminal sulfonate groups to improve dimensional and chemical stabilities, proton conductivity () and fuel barrier properties of the as-produced membranes. The addition of S-NbS nanoflakes to SPEEK decreases the vanadium ion permeability from 5.

Exchange Bias in Molecule/Fe GeTe van der Waals Heterostructures via Spinterface Effects.

The exfoliation of layered magnetic materials generates atomically thin flakes characterized by an ultrahigh surface sensitivity, which makes their magnetic properties tunable via external stimuli, such as electrostatic gating and proximity effects. Another powerful approach to engineer magnetic materials is molecular functionalization, generating hybrid interfaces with tailored magnetic interactions, called spinterfaces. However, spinterface effects have not yet been explored on layered magnetic materials.

Comparative Extraction of Phenolic Compounds from Olive Leaves Using a Sonotrode and an Ultrasonic Bath and the Evaluation of Both Antioxidant and Antimicrobial Activity.

A sonotrode ultrasound-assisted extraction of phenolic compounds from olive leaves has been developed using a Box-Behnken design to optimize the effects of solvent composition and ultrasound parameters. The determination of single phenolic compounds was performed by HPLC-MS and the highest recovery in total compounds, oleuropein and hydroxytyrosol was achieved using EtOH/HO (55:45, /), 8 min and 100% of amplitude. The optimal conditions were applied on leaves from seven olive cultivars grown under the same conditions and the results were compared with those found by using a conventional ultrasonic bath, obtaining no statistical differences.

Gate-tuneable and chirality-dependent charge-to-spin conversion in tellurium nanowires.

Chiral materials are an ideal playground for exploring the relation between symmetry, relativistic effects and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as tellurium have excellent electrical conductivity, but their potential for enabling the electrical control of spin polarization in devices remains unclear.