A review of L. genus (Moraceae): a source of bioactive compounds for health and disease. Part 1.

The L. genus, belonging to the Moraceae family, includes around 850 species that are widely distributed in tropical and subtropical regions around the world; including the Eastern Mediterranean, Asia, Africa, Australia, and a large territory of America. Among the most important species are , , , , , Vahl, , , , and .

Development of a Nanostructured Electrochemical Genosensor for the Detection of the K-ras Gene.

In the scientific literature, it has been documented that electrochemical genosensors are novel analytical tools with proven clinical diagnostic potential for the identification of carcinogenic processes due to genetic and epigenetic alterations, as well as infectious diseases due to viruses or bacteria. In the present work, we describe the construction of an electrochemical genosensor for the identification of the k12p.1 mutation; it was based on use of Screen-Printed Gold Electrode (SPGE), Cyclic Voltammetry (CV), and Atomic Force Microscopy (AFM), for the monitoring the electron transfer trough the functionalized nanostructured surface and corresponding morphological changes.

Non-Genomic Actions of Estrogens on the DNA Repair Pathways Are Associated With Chemotherapy Resistance in Breast Cancer.

Estrogens have been implicated in the etiology of breast cancer for a long time. It has been stated that long-term exposure to estrogens is associated with a higher incidence of breast cancer, since estradiol (E) stimulates breast cell growth; however, its effect on DNA damage/repair is only starting to be investigated. Recent studies have documented that estrogens are able to modify the DNA damage response (DDR) and DNA repair mechanisms.

Enzymatically assisted isolation of high-quality cellulose nanoparticles from water hyacinth stems.

High quality cellulose nanoparticles (CNP) were isolated from water hyacinth stem cellulose (Cel-WH) extracted via successive thermochemical and alkaline-peroxide treatments, and further enzymatically hydrolysed using the commercial cellulase complex, NS22086, at 50ºC. The maximum CNP concentration was reached after 120 min of enzymatic hydrolysis, with a hydrodynamic diameter in the order of 200-250 nm and an increase of 5% in crystallinity as compared with Cel-WH. The obtained rod-shaped cellulose nanocrystals, as revealed by atomic force microscopy (AFM), exhibited a nominal diameter of 15.

Gold nanoparticle uptake is enhanced by estradiol in MCF-7 breast cancer cells.

In the present study, we investigated the effects of 17β-estradiol (E) on membrane roughness and gold nanoparticle (AuNP) uptake in MCF-7 breast cancer cells. Estrogen receptor (ER)-positive breast cancer cells (MCF-7) were exposed to bare 20 nm AuNPs in the presence and absence of 1×10 M E for different time intervals for up to 24 hrs. The effects of AuNP incorporation and E incubation on the MCF-7 cell surface roughness were measured using atomic force microscopy (AFM).

Development of a Nanostructured Platform for Identifying HER2-Heterogeneity of Breast Cancer Cells by Surface-Enhanced Raman Scattering.

Biosensor technology has great potential for the detection of cancer through tumor-associated molecular biomarkers. In this work, we describe the immobilization of the recombinant humanized anti-HER2 monoclonal antibody (trastuzumab) on a silver nanostructured plate made by pulsed laser deposition (PLD), over a thin film of Au(111). Immobilization was performed via 4-mercapto benzoic acid self-assembled monolayers (4-MBA SAMs) that were activated with coupling reagents.

Simultaneous recording of electrical activity and the underlying ionic currents in NG108-15 cells cultured on gold substrate.

This paper shows the simultaneous recording of electrical activity and the underlying ionic currents by using a gold substrate to culture NG108-15 cells. Cells grown on two different substrates (plastic Petri dishes and gold substrates) were characterized quantitatively through scanning electron microscopy (SEM) as well as qualitatively by optical and atomic force microscopy (AFM). No significant differences were observed between the surface area of cells cultured on gold substrates and Petri dishes, as indicated by measurements performed on SEM images.

Acquisition and persistence of strain-specific methicillin-resistant Staphylococcus aureus and their determinants in community nursing homes.

Background: Nursing home residents are frequently colonized with various strains of methicillin-resistant Staphylococcus aureus (MRSA) but the intra-facility dynamics of strain-specific MRSA remains poorly understood. We aimed at identifying and quantifying the associations between acquisition and carriage of MRSA strains and their potential risk factors in community nursing homes using mathematical modeling.

Methods: The data was collected during a longitudinal MRSA surveillance study in six nursing homes in South Central Wisconsin.

Increasing roughness of the human breast cancer cell membrane through incorporation of gold nanoparticles.

Gold nanoparticles (AuNPs) have been proposed for use in the treatment of different types of cancer, including breast cancer. At present, neither the mechanisms of AuNP interaction with the plasma membrane surface and their delivery and intracellular distribution in cancer cells nor their effect on the plasma membrane so as to allow cell incorporation of larger amounts of AuNPs is known. The objective of this work was to study the interaction of bare 20 nm diameter AuNPs with the plasma membrane of human MCF-7 breast cancer cells, as well as their uptake, intracellular distribution, and induction of changes on the cell surface roughness.

Identifying conditions for elimination and epidemic potential of methicillin-resistant Staphylococcus aureus in nursing homes.

Background: Residents of nursing homes are commonly colonized with methicillin-resistant Staphylococcus aureus (MRSA) but there is a limited understanding of the dynamics and determinants of spread in this setting. To address this gap, we sought to use mathematical modeling to assess the epidemic potential of MRSA in nursing homes and to determine conditions under which non-USA300 and USA300 MRSA could be eliminated or reduced in the facilities.

Methods: Model parameters were estimated from data generated during a longitudinal study of MRSA in 6 Wisconsin nursing homes.

Patterning highly ordered arrays of complex nanofeatures through EUV directed polarity switching of non chemically amplified photoresist.

Given the importance of complex nanofeatures in the filed of micro-/nanoelectronics particularly in the area of high-density magnetic recording, photonic crystals, information storage, micro-lens arrays, tissue engineering and catalysis, the present work demonstrates the development of new methodology for patterning complex nanofeatures using a recently developed non-chemically amplified photoresist (n-CARs) poly(4-(methacryloyloxy)phenyl)dimethylsulfoniumtriflate) (polyMAPDST) with the help of extreme ultraviolet lithography (EUVL) as patterning tool. The photosensitivity of polyMAPDST is mainly due to the presence of radiation sensitive trifluoromethanesulfonate unit (triflate group) which undergoes photodegradation upon exposure with EUV photons, and thus brings in polarity change in the polymer structure. Integration of such radiation sensitive unit into polymer network avoids the need of chemical amplification which is otherwise needed for polarity switching in the case of chemically amplified photoresists (CARs).

Models to predict prevalence and transition dynamics of methicillin-resistant Staphylococcus aureus in community nursing homes.

Background: Recent spread of USA300 methicillin-resistant Staphylococcus aureus (MRSA) to nursing homes has been of particular concern. We sought to predict the ultimate prevalence of USA300 and non-USA300 MRSA and to examine the influence of potential risk factors on MRSA acquisition in community nursing homes.

Methods: The data were collected during a longitudinal MRSA surveillance study that involved 449 residents in 6 community nursing homes in Wisconsin.

Variation in tumor natural history contributes to racial disparities in breast cancer stage at diagnosis.

Black women tend to be diagnosed with breast cancer at a more advanced stage than whites and subsequently experience elevated breast cancer mortality. We sought to determine whether there are racial differences in tumor natural history that contribute to these disparities. We used the University of Wisconsin Breast Cancer Simulation Model, a validated member of the National Cancer Institute's Cancer Intervention and Surveillance Modeling Network, to evaluate the contribution of racial differences in tumor natural history to observed disparities in breast cancer incidence.

Laser-induced micron and submicron ordering effects in quasi-percolated nanostructured silver thin films.

Quasi-percolated nanostructured silver thin films are used as the starting morphology for inducing simultaneously changes in shape and ordering effects by laser irradiation. The complex fingered nanostructures are transformed into nanospheres which in turn are arranged in micro-circular patterns when irradiated through a pinhole. These transformations are characterized by transmission electron microscopy and atomic force microscopy.

Classification of hexagonal adlayer arrangements by means of collective geometrical properties.

Unequal-sphere packing model is applied for the simulation of large number of hexagonal adlayer structures with surface coverage between theta=13 and theta=1 on the hexagonal substrate, with atomic radius of the adsorbate and substrate atoms as the only input. Each structure is characterized with respect to collective adlayer properties: the average adlayer height and the adlayer roughness. The distribution of hexagonal arrangements is presented in a special plot, which can be used for identification and characterization of hexagonal adlayers of different surface coverages and atomic registries.

Potential energy landscape of monolayer-surface systems governed by repulsive lateral interactions: the case of (3 x 3)-I-Pt(111).

Combined density functional theory (DFT) and Monte Carlo (MC) approach is applied to study the potential energy landscape of four iodine atoms adsorbed on the Pt(111) surface in a (3 x 3) unit cell. Three critical points were identified: (3 x 3)-sym and (3 x 3)-asym, corresponding to structures well known from experimental studies, while the third one (3 x 3)-zigzag is a new structure not reported before. An interaction model fitted to DFT calculations allows us to explain the difference between arrangements of iodine monolayer in vacuum, air, and solution environments as a result of different repulsion regimes.

The relationship between the surface composition and electrical properties of corrosion films formed on carbon steel in alkaline sour medium: an XPS and EIS study.

This work studies the evolution of 1018 carbon steel surfaces during 3-15 day immersion in alkaline sour medium 0.1 M (NH4)2S and 10 ppm CN(-) as (NaCN). During this period of time, surfaces were jointly characterized by electrochemical techniques in situ (electrochemical impedance spectroscopy, EIS) and spectroscopic techniques ex situ (X-ray photoelectron spectroscopy, XPS).

Unequal-sphere packing model for simulation of the uniaxially compressed iodine adlayer on Au(111).

A simple unequal-sphere packing (USP) model, based on pure geometrical principles, was applied to study the centered-rectangular iodine c(px radical3)R30 degrees adlayer on the Au(111) surface, well-known from surface X-ray structure (SXS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM) experiments. To reproduce the exact patterns observed in experiments, two selective conditions-minimum average adsorbate height and minimum adlayer roughness-were imposed. As a result, a series of adlayer patterns with c(px radical3)R30 degrees symmetry (2.

Detailed characterization of (3 x 3) iodine adlayer on Pt(111) by unequal-sphere packing model.

A simple unequal-sphere packing model is applied to study the iodine (3x3) adlayer on the Pt(111) surface. By using a newly introduced parameter, defined as the average adsorbate height, three characteristic adlattices, (3x3)-sym, (3x3)-asym, and (3x3)-lin, have been selected and characterized in great detail, including the exact adatom registry. The (3x3)-sym iodine adlattice, observed in many experimental studies, appears to be, on average, the closest one to the substrate surface.

Ultrastructure of dental enamel afflicted with hypoplasia: an atomic force microscopic study.

The ultrastructure of the human tooth enamel from a patient diagnosed with hypoplasia (HYP) was investigated using atomic force microscopy (AFM) and compared with the surface of normal human tooth enamel. Hypoplasia is a hereditary defect of dental enamel in which the enamel is deficient in either quality or quantity. AFM results presented for the HYP tooth enamel clearly demonstrate that the apatite crystal morphology in hypoplasia tooth enamel is perturbed in the diseased state which could result from a defective synthesis of the extracellular matrix proteins, e.

An atomic force microscopic study of the ultrastructure of dental enamel afflicted with amelogenesis imperfecta.

The ultrastructure of human tooth enamel from a patient diagnosed to have amelogenesis imperfecta (AI) was investigated using atomic force microscopy (AFM) and compared with normal human tooth enamel. AI is a hereditary defect of dental enamel in which the enamel is deficient in either quality or quantity. Tissue-specific proteins, especially amelogenins, have been postulated to play a central role in amelogenesis.

Imaging surface atomic structure by means of auger electrons.

Measurements of the complete angular distribution of Auger electrons emitted from well-defined platinum[111] single-crystal surfaces have led to the discovery that the distributions are composed of "silhouettes" of surface atoms "back lit" by emission from atoms deeper in the solid. Theoretical simulations of Auger electron angular distributions based upon atomic point emitters and spherical atomic scatterers of uniform cross section are in close agreement with these experimental results, but opposite to previous theoretical predictions. In view of the definitive results obtained and the straightforward agreement between theory and experiment, angular distribution Auger microscopy (ADAM) is useful for direct imaging of interfacial structure and investigation of electron-solid interactions in the physical and biological sciences and engineering.