Partial Water Intrusion and Extrusion in Hydrophobic Nanopores for Thermomechanical Energy Dissipation.

Forced wetting (intrusion) and spontaneous dewetting (extrusion) of hydrophobic/lyophobic nanoporous materials by water/nonwetting liquid are of great importance for a broad span of technological and natural systems such as shock-absorbers, molecular springs, separation, chromatography, ion channels, nanofluidics, and many more. In most of these cases, the process of intrusion-extrusion is not complete due to the stochastic nature of external stimuli under realistic operational conditions. However, understanding of these partial processes is limited, as most of the works are focused on an idealized complete intrusion-extrusion cycle.

Bubbles enable volumetric negative compressibility in metastable elastocapillary systems.

Although coveted in applications, few materials expand when subject to compression or contract under decompression, i.e., exhibit negative compressibility.

Exploring the Heat of Water Intrusion into a Metal-Organic Framework by Experiment and Simulation.

Wetting of a solid by a liquid is relevant for a broad range of natural and technological processes. This process is complex and involves the generation of heat, which is still poorly understood especially in nanoconfined systems. In this article, scanning transitiometry was used to measure and evaluate the pressure-driven heat of intrusion of water into solid ZIF-8 powder within the temperature range of 278.

Tuning Wetting-Dewetting Thermomechanical Energy for Hydrophobic Nanopores via Preferential Intrusion.

Heat and the work of compression/decompression are among the basic properties of thermodynamic systems. Being relevant to many industrial and natural processes, this thermomechanical energy is challenging to tune due to fundamental boundaries for simple fluids. Here via direct experimental and atomistic observations, we demonstrate, for fluids consisting of nanoporous material and a liquid, one can overcome these limitations and noticeably affect both thermal and mechanical energies of compression/decompression exploiting preferential intrusion of water from aqueous solutions into subnanometer pores.

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process.

Zeolitic imidazolate framework (ZIF) microporous materials have already been employed in many fields of energetic and environmental interest since the last decade. The commercial scale production of some of these materials makes them more accessible for their implementation in industrial processes; however, their massive synthesis may entail modifications to the preparation protocols, which may result in a loss in the optimization of this process and a drop in the material's quality. This fact may have implications for the performance of these materials during their lifetime, especially when they are used in applications such as energy dissipation, in which they are subjected to several operating cycles under high pressures.

Hydrophobicity of molecular-scale textured surfaces: The case of zeolitic imidazolate frameworks, an atomistic perspective.

Hydrophobicity has proven fundamental in an inexhaustible amount of everyday applications. Material hydrophobicity is determined by chemical composition and geometrical characteristics of its macroscopic surface. Surface roughness or texturing enhances intrinsic hydrophilic or hydrophobic characteristics of a material.

Bimetallic Zeolitic Imidazole Frameworks for Improved Stability and Performance of Intrusion-Extrusion Energy Applications.

Hydrophobic flexible zeolitic imidazole frameworks (ZIFs) represent reference microporous materials in the area of mechanical energy storage, conversion, and dissipation via non-wetting liquid intrusion-extrusion cycle. However, some of them exhibit drawbacks such as lack of stability, high intrusion pressure, or low intrusion volume that make them non-ideal materials to consider as candidates for real applications. In this work, we face these limitations by exploiting the hybrid ZIF concept.

Real-World Treatment Patterns among Patients with Alopecia Areata in the USA: A Retrospective Claims Analysis.

Alopecia areata is an autoimmune disorder characterized by hair loss, for which there are few treatment options. This claims-based study characterized recent real-world treatment patterns among patients in the USA with alopecia areata, including the subtypes alopecia totalis and alopecia universalis, in the first year after diagnosis of an episode of alopecia areata. Approximately 5% of all patients (adults (age ≥ 18 years), n = 7,703; adolescents (age 12-17 years), n = 595) had alopecia totalis or alopecia universalis.

Mechanism of Water Intrusion into Flexible ZIF-8: Liquid Is Not Vapor.

Zeolitic Imidazolate Frameworks (ZIF) find application in storage and dissipation of mechanical energy. Their distinctive properties linked to their (sub)nanometer size and hydrophobicity allow for water intrusion only under high hydrostatic pressure. Here we focus on the popular ZIF-8 material investigating the intrusion mechanism in its nanoscale cages, which is the key to its rational exploitation in target applications.

Optimization of the wetting-drying characteristics of hydrophobic metal organic frameworks via crystallite size: The role of hydrogen bonding between intruded and bulk liquid.

Hypothesis: The behavior of Heterogeneous Lyophobic Systems (HLSs) comprised of a lyophobic porous material and a corresponding non-wetting liquid is affected by a variety of different structural parameters of the porous material. Dependence on exogenic properties such as crystallite size is desirable for system tuning as they are much more facilely modified. We explore the dependence of intrusion pressure and intruded volume on crystallite size, testing the hypothesis that the connection between internal cavities and bulk water facilitates intrusion via hydrogen bonding, a phenomenon that is magnified in smaller crystallites with a larger surface/volume ratio.

Trends in Prevalence and Incidence of Alopecia Areata, Alopecia Totalis, and Alopecia Universalis Among Adults and Children in a US Employer-Sponsored Insured Population.

Importance: Alopecia areata (AA) is characterized by nonscarring hair loss of the scalp, face, and/or body. Alopecia totalis (AT) and alopecia universalis (AU) involve complete loss of the scalp and body hair, respectively. The epidemiology of AA in the US remains unclear, having previously been extrapolated from older studies that were limited to specific geographic areas or clinical settings, or from self-reported data.

Turning Molecular Springs into Nano-Shock Absorbers: The Effect of Macroscopic Morphology and Crystal Size on the Dynamic Hysteresis of Water Intrusion-Extrusion into-from Hydrophobic Nanopores.

Controlling the pressure at which liquids intrude (wet) and extrude (dry) a nanopore is of paramount importance for a broad range of applications, such as energy conversion, catalysis, chromatography, separation, ionic channels, and many more. To tune these characteristics, one typically acts on the chemical nature of the system or pore size. In this work, we propose an alternative route for controlling both intrusion and extrusion pressures proper arrangement of the grains of the nanoporous material.

Effectiveness of crizotinib versus entrectinib in -positive non-small-cell lung cancer using clinical and real-world data.

To compare clinical trial results for crizotinib and entrectinib in -positive non-small-cell lung cancer and compare clinical trial data and real-world outcomes for crizotinib. We analyzed four phase I-II studies using a simulated treatment comparison (STC). A STC of clinical trial versus real-world evidence compared crizotinib clinical data to real-world outcomes.

Real-World Outcomes Among Crizotinib-Treated Patients with ROS1-Positive Advanced Non-Small-Cell Lung Cancer: A Community Oncology-Based Observational Study.

Background: Crizotinib was the first oral targeted therapy approved by the US Food and Drug Administration (FDA), on 11 March 2016, for c-ros oncogene 1 (ROS1)-positive advanced non-small-cell lung cancer (NSCLC). Data to support long-term clinical benefit in a real-world setting are limited.

Objective: This study aimed to assess real-world clinical outcomes among patients with ROS1-positive advanced NSCLC treated with crizotinib in the US community oncology setting.

Estimation of the post-mortem interval of human skeletal remains using Raman spectroscopy and chemometrics.

An important demand exists in the field of forensic analysis to objectively determine the post-mortem interval (PMI) when human skeletal remains are discovered. It is widely known that bones undergo different chemical and physical processes after death, mainly due to their interaction with the environment in which they are found, although it is not known exactly what these processes consist of. Multiple techniques have been used so far to follow up these and other post-mortem changes and thus establish the time elapsed since the individual's death, but they present important drawbacks in terms of reliability and accuracy.

Midterm results and complications rates in vancouver type B2 and B3 periprosthetic femoral fractures treated with modular fluted tapered stems.

Unlabelled: Evaluate the mid-term success rate of these stems in periprosthetic femur fractures and to analyze the complications observed with the use of these stems.

Methods: Thirty five patients that underwent hip revision surgery secondary to Vancouver type B2 and B3 periprosthetic femur fracture were evaluated. In all cases, modular fluted tapered stems were used.

Patients' Experiences in Transitioning to Secondary Progressive Multiple Sclerosis: Qualitative Interviews.

Introduction: Critical gaps exist in the understanding of the continuum of multiple sclerosis (MS) progression, particularly with regard to the patient experience prior to and during the transition from relapsing-remitting MS (RRMS) to secondary-progressive MS (SPMS) stages. To date, there are no clear diagnostic criteria in the determination of the clinical transition. We report here the use of patient experience data to support the development of a qualitative conceptual model of MS that describes the patient journey of transition from active-relapsing disease to progressive MS.

Identification and diagnosis of Secondary Progressive Multiple Sclerosis during the clinical encounter: Results from a physician survey.

Background: It is difficult to characterize the transition from relapsing-remitting multiple sclerosis (RRMS) to secondary progressive MS (SPMS), due to symptomatic variability across patients. Diagnosis of SPMS is prolonged and often established retrospectively, as it is based on patient clinical history and symptoms. This cross-sectional study aimed to identify MS neurologist reported clinical indicators deemed important in diagnosing SPMS in clinical practice.

Health care resource utilization and disease modifying treatment use in multiple sclerosis patients by age and insurance type.

Objective: The objective of this study was to describe and compare health care resource utilization (HCRU) and disease modifying treatment (DMT) use among US adults <65 years with multiple sclerosis (MS), across commercial and Medicare Advantage plans.

Methods: Medical and pharmacy claims data from commercial and Medicare Advantage with Part D (MAPD) plans were extracted for MS patients age 18 - 64 identified between 1 January 2014 and 31 May 2017. Comparisons were made between commercial and MAPD enrollees for all-cause HCRU and DMT use over 1 year, overall and by 5 year age groups.

Identifying disability level in multiple sclerosis patients in a U.S.-based health plan claims database.

Aims: In clinical trials, disability progression in multiple sclerosis (MS) is measured by the Kurtzke expanded disability status scale (EDSS), which is not captured in routine clinical care in the U.S. This study developed a claims-based disability score (CDS) based on the EDSS for assigning MS disability level in a U.

OPLS multivariate regression of FTIR-ATR spectra of acrylic paints for age estimation in contemporary artworks.

In recent years the interest and demand for artworks has been increasing as they are an interesting commercial investment due to their growing value in the market. This explains the increasing number of counterfeits dealing with artworks that has led to the development of new methodologies for their characterization. The material characterization of these types of works can provide relevant information for both authentication and conservation/restoration.

Do Employees From Less-Healthy Communities Use More Care and Cost More? Seeking to Establish a Business Case for Investment in Community Health.

Introduction: Few studies have examined the impact of community health on employers. We explored whether employed adults and their adult dependents living in less-healthy communities in the greater Philadelphia region used more care and incurred higher costs to employers than employees from healthier communities.

Methods: We used a multi-employer database to identify adult employees and dependents with continuous employment and mapped them to 31 zip code regions.