Laboratory Evaluation of Shell Add-On Products for American Football Helmets for Professional Linemen.

The Guardian Cap NXT (GC NXT) and the ProTech Helmet Cap (ProTech) are commercially available aftermarket products designed to augment the energy attenuation characteristics of American football helmets. The ability of these helmet shell add-on products to mitigate the severity of impacts typically experienced by professional offensive and defensive linemen was evaluated for seven helmet models using two test series. In linear impactor tests, the GC NXT reduced head impact severity as measured by the head acceleration response metric (HARM) by 9% relative to the helmets only, while the ProTech reduced HARM by 5%.

Position-Specific Circumstances of Concussions in the NFL: Toward the Development of Position-Specific Helmets.

Consideration of position-specific features of the NFL concussion environment could enable improved risk mitigation through the design of position-specific helmets to improve self-protection as well as protection for the other player with whom the contact occurs. The purpose of this paper is to quantify position-specific features of scenarios resulting in concussions to NFL players, and the players they contact, by reviewing all game footage (broadcast and non-broadcast) over 4 seasons. Position-specific features were documented for 647 concussions in which a primary exposure could be visualized, including impact source, helmet impact location, activity, and the other player with whom the contact occurred.

Development and Evaluation of a Test Method for Assessing the Performance of American Football Helmets.

As more is learned about injury mechanisms of concussion and scenarios under which injuries are sustained in football games, methods used to evaluate protective equipment must adapt. A combination of video review, videogrammetry, and laboratory reconstructions was used to characterize concussive impacts from National Football League games during the 2015-2017 seasons. Test conditions were generated based upon impact locations and speeds from this data set, and a method for scoring overall helmet performance was created.

Comparison of Laboratory and On-Field Performance of American Football Helmets.

The relationship between laboratory and on-field performance of football helmets was assessed for 31 football helmet models selected from those worn by players in the 2015-2019 National Football League (NFL) seasons. Linear impactor tests were conducted with helmets placed on an instrumented Hybrid III head and neck assembly mounted on a sliding table. Based on impacts to each helmet at six impact locations and three velocities, a helmet performance score (HPS) was calculated using a linear combination of the head injury criterion (HIC) and the diffuse axonal multi-axis general evaluation (DAMAGE).

Laboratory Reconstructions of Concussive Helmet-to-Helmet Impacts in the National Football League.

Seventeen concussive helmet-to-helmet impacts occurring in National Football League (NFL) games were analyzed using video footage and reconstructed by launching helmeted crash test dummies into each other in a laboratory. Helmet motion on-field and in the laboratory was tracked in 3D before, during, and after impact in multiple high frame rate video views. Multiple (3-10) tests were conducted for each of the 17 concussive cases (100 tests total) with slight variations in input conditions.

Surface Contact Features, Impact Obliquity, and Preimpact Rotational Motion in Concussive Helmet-to-Ground Impacts: Assessment via a New Impact Test Device.

This paper reports the development of a test device for replicating unique features of concussion-causing helmet-to-ground impacts. Helmet-to-ground impacts are characterized by an oblique impact velocity vector, preimpact rotational motion of the helmeted head, and an impact into a compliant frictional surface of unknown effective mass. No helmet assessment testing program replicates these impact characteristics, yet they influence brain injury risk and therefore may influence helmet design priorities.

The biomechanics of concussive helmet-to-ground impacts in the National Football league.

This paper presents a detailed characterization of helmet-to-ground impacts in the National Football League. Video analysis was performed for 16 head-to-ground impacts that caused concussions. Average resultant closing velocity was 8.

Facilitating translational team science: The project leader model.

Project management expertise is employed across many professional sectors, including clinical research organizations, to ensure that efforts undertaken by the organization are completed on time and according to specifications and are capable of achieving the needed impact. Increasingly, project leaders (PLs) who possess this expertise are being employed in academic settings to support clinical and preclinical translational research team science. Duke University's clinical and translational science enterprise has been an early adopter of project management to support clinical and preclinical programs.

The response of the pediatric head to impacts onto a rigid surface.

The study of pediatric head injury relies heavily on the use of finite element models and child anthropomorphic test devices (ATDs). However, these tools, in the context of pediatric head injury, have yet to be validated due to a paucity of pediatric head response data. The goal of this study is to investigate the response and injury tolerance of the pediatric head to impact.

Video Analysis of Reported Concussion Events in the National Football League During the 2015-2016 and 2016-2017 Seasons.

Background: Concussions in American football remain a high priority of sports injury prevention programs. Detailed video review provides important information on causation, the outcomes of rule changes, and guidance on future injury prevention strategies.

Purpose: Documentation of concussions sustained in National Football League games played during the 2015-2016 and 2016-2017 seasons, including consideration of video views unavailable to the public.

On the relative importance of bending and compression in cervical spine bilateral facet dislocation.

Background: Cervical bilateral facet dislocations are among the most devastating spine injuries in terms of likelihood of severe neurological sequelae. More than half of patients with tetraparesis had sustained some form of bilateral facet fracture dislocation. They can occur at any level of the sub-axial cervical spine, but predominate between C5 and C7.

Spectroscopic Analysis for Mapping Wildland Fire Effects from Remotely Sensed Imagery.

1.5 to 4 million hectares of land burns in wildfire across the United States each year, contributing to post-fire erosion, ecosystem degradation and loss of wildlife habitat. Unmanned Aircraft Systems (UAS) and sensor miniaturization offer a new paradigm, providing an affordable, safe, and responsive on-demand tool for monitoring fire effects at a much finer spatial resolution than is possible with current technology.

The compressive stiffness of human pediatric heads.

Head injury is a persistent and costly problem for both children and adults. Globally, approximately 10 million people are hospitalized each year for head injuries. Knowing the structural properties of the head is important for modeling the response of the head in impact, and for providing insights into mechanisms of head injury.

Pediatric Coronal Suture Fiber Alignment and the Effect of Interdigitation on Coronal Suture Mechanical Properties.

The morphological and mechanical properties of the pediatric skull are important in understanding pediatric head injury biomechanics. Although previous studies have analyzed the morphology of cranial sutures, none has done so in pediatric specimens nor have previous studies related the morphology to mechanical properties of human sutures. This study quantified the geometry of pediatric cranial sutures and investigated its correlation with the suture mechanical properties.

The response of the adult and ATD heads to impacts onto a rigid surface.

Given the high incidence of TBI, head injury has been studied extensively using both cadavers and anthropomorphic test devices (ATDs). However, few studies have benchmarked the response of ATD heads against human data. Hence, the objective of this study is to investigate the response of adult and ATD heads in impact, and to compare adult Hybrid III head responses to the adult head responses.

Three-dimensional adult male head and skull contours.

Objective: Traumatic brain injury (TBI) is a major public health issue, affecting millions of people annually. Anthropomorphic test devices (ATDs) and finite element models (FEMs) provide a means of understanding factors leading to TBI, potentially reducing the occurrence. Thus, there is a need to ensure that these tools accurately model humans.

Pediatric head and neck dynamics in frontal impact: analysis of important mechanical factors and proposed neck performance corridors for 6- and 10-year-old ATDs.

Objective: Traumatic injuries are the leading cause of death of children aged 1-19 in the United States and are principally caused by motor vehicle collisions, with the head being the primary region injured. The neck, though not commonly injured, governs head kinematics and thus influences head injury. Vehicle improvements necessary to reduce these injuries are evaluated using anthropomorphic testing devices (ATDs).

Importance of muscle activations for biofidelic pediatric neck response in computational models.

Objective: During dynamic injury scenarios, such as motor vehicle crashes, neck biomechanics contribute to head excursion and acceleration, influencing head injuries. One important tool in understanding head and neck dynamics is computational modeling. However, realistic and stable muscle activations for major muscles are required to realize meaningful kinematic responses.

The mechanical and morphological properties of 6 year-old cranial bone.

Traumatic Brain Injury (TBI) is a leading cause of mortality and morbidity for children in the United States. The unavailability of pediatric cadavers makes it difficult to study and characterize the mechanical behavior of the pediatric skull. Computer based finite element modeling could provide valuable insights, but the utility of these models depends upon the accuracy of cranial material property inputs.

Attenuation of blast pressure behind ballistic protective vests.

Background: Clinical studies increasingly report brain injury and not pulmonary injury following blast exposures, despite the increased frequency of exposure to explosive devices. The goal of this study was to determine the effect of personal body armour use on the potential for primary blast injury and to determine the risk of brain and pulmonary injury following a blast and its impact on the clinical care of patients with a history of blast exposure.

Methods: A shock tube was used to generate blast overpressures on soft ballistic protective vests (NIJ Level-2) and hard protective vests (NIJ Level-4) while overpressure was recorded behind the vest.

Development of a finite element model for blast brain injury and the effects of CSF cavitation.

Blast-related traumatic brain injury is the most prevalent injury for combat personnel seen in the current conflicts in Iraq and Afghanistan, yet as a research community,we still do not fully understand the detailed etiology and pathology of this injury. Finite element (FE) modeling is well suited for studying the mechanical response of the head and brain to blast loading. This paper details the development of a FE head and brain model for blast simulation by examining both the dilatational and deviatoric response of the brain as potential injury mechanisms.

Mesh considerations for finite element blast modelling in biomechanics.

Finite element (FE) modelling is a popular tool for studying human body response to blast exposure. However, blast modelling is a complex problem owing to more numerous fluid-structure interactions (FSIs) and the high-frequency loading that accompanies blast exposures. This study investigates FE mesh design for blast modelling using a sphere in a closed-ended shock tube meshed with varying element sizes using both tetrahedral and hexahedral elements.

Evaluation of pediatric skull fracture imaging techniques.

Radiologic imaging is crucial in the diagnosis of skull fracture, but there is some doubt as to whether different imaging modalities can accurately identify fractures present on a human skull. While studies have been performed to evaluate the efficacy of radiologic imaging at other anatomical locations, there have been no systematic studies comparing various CT techniques, including high resolution imaging with and without 3D reconstructions to conventional radiologic imaging in children, we investigated which imaging modalities: high-resolution CT scan with 3D projections, clinical-resolution CT scans or X-rays, best showed fracture occurrence in a pediatric human cadaver skull by having an expert pediatric radiologist examine radiologic images from fractured skulls. The skulls used were taken from pediatric cadavers ranging in age from 5 months to 16 years.

Pediatric head contours and inertial properties for ATD design.

Child head trauma in the United States is responsible for 30% of all childhood injury deaths with costs estimated at $10 billion per year. The common tools for studying this problem are the child anthropomorphic test devices (ATDs). The headform sizes and structural properties of child ATDs are based on various anthropometric studies and scaled Hybrid III mass and center of gravity (CG) properties.