Publications by authors named "Barkay Z"

The Smith-Purcell effect allows for coherent free-electron-driven compact light sources over the entire electromagnetic spectrum. Intriguing interaction regimes, with prospects for quantum optical applications, are expected when the driving free electron enters the sub-keV range, though this has until now remained an experimental challenge. Here, we demonstrate the Smith-Purcell light emission from UV to visible using engineerable, fabricated gratings with periodicities as low as 19 nm and with electron energies as low as 300 eV.

View Article and Find Full Text PDF
Article Synopsis
  • The study explores the use of localized microwave heating (LMH) in a continuous process for solidifying metal powder, comparing it to traditional laser-based additive manufacturing techniques.
  • Researchers implemented LMH in a lateral scanning method, successfully solidifying bronze powder at a rate of ~1 mm/s, creating solid bars with rough surfaces.
  • The resulting products showed similar hardness and density properties to those made with laser methods, and the research assesses both the potential advantages and limitations of this LMH approach in metal manufacturing.
View Article and Find Full Text PDF
Article Synopsis
  • This paper examines the elastic properties of Ti6Al4V alloy in four manufacturing conditions, revealing differences in Young's modulus, shear modulus, and Poisson's ratio.
  • A specially designed sample was used to measure sound wave velocities, helping to derive elastic constant tensors and 3D Young's modulus maps, while EBSD and μCT techniques analyzed grain structures and defects.
  • Findings indicate that AM materials are less anisotropic than hot rolled alloys; the study emphasizes the importance of manufacturing methods and orientations in material properties for better mechanical design and quality control.
View Article and Find Full Text PDF
Article Synopsis
  • Recent advancements in soft electronics and applications like soft robotics and health monitoring emphasize the need for materials that maintain softness while offering electrical conductivity.
  • Traditional conductive fillers compromise the mechanical properties (like softness and elasticity) of rubbers.
  • This research presents a composite of vinyl methyl silicone rubber and multi-walled carbon nanotubes (MWCNTs), highlighting its conductive capabilities (comparable to carbon black-based options) with minimal hardness and excellent elastic recovery, along with self-sensing properties.
View Article and Find Full Text PDF
Article Synopsis
  • Surveys in Eilat's upper mesophotic coral ecosystem revealed that colonies of the Sinularia octocoral create unique columnar structures known as spiculites, marking a new finding in coral reef studies.
  • The research focused on understanding the spatial distribution, microstructure, and elemental makeup of these spiculites, confirming they are produced exclusively by the species S. vrijmoethi.
  • Advanced analysis techniques showed that the spiculites consist of both magnesium-calcite sclerites and crystallites, suggesting the living coral may gain benefits from improved water flow due to these protruding structures.
View Article and Find Full Text PDF

We evaluate the effect of mechanical exfoliation of van der Waals materials on crystallographic orientations of the resulting flakes. Flakes originating from a single crystal of graphite, whose orientation is confirmed using STM, are studied using facet orientations and electron back-scatter diffraction (EBSD). While facets exhibit a wide distribution of angles after a single round of exfoliation ([Formula: see text]), EBSD shows that the true crystallographic orientations are more narrowly distributed ([Formula: see text]), and facets have an approximately [Formula: see text] error from the true orientation.

View Article and Find Full Text PDF
Article Synopsis
  • Researchers have successfully created "radial" silicon/NiSi core-shell nanowire heterostructures by controlling nickel atom diffusion into silicon cores, followed by nickel silicide phase formation.
  • This process uses a two-step thermal method involving low-temperature metal diffusion (200-400 °C) and a higher-temperature curing step (400 °C), allowing precise control over the thickness of the silicide shell formed.
  • The resulting structures have potential applications in optoelectronics, such as enhancing solar cells by providing an embedded conductive layer, which can improve charge collection and minimize electron recombination.
View Article and Find Full Text PDF

The formation of intricately shaped crystalline minerals by organisms is orchestrated by specialized biomacromolecules. The macromolecules associated with coccoliths, nanometer-sized calcite crystal arrays produced by marine microalgae, can form a distinct calcium-rich phase via macromolecular recognition. Here, we show that this calcium-rich phase can be mineralized into a thin film of single-crystalline calcite by the balanced addition of carbonate ions.

View Article and Find Full Text PDF

Cold radiofrequency plasma treatment modified wetting and floating regimes of pepper seeds. The wetting regime of plasma-treated seeds was switched from the Wenzel-like partial wetting to the complete wetting. No hydrophobic recovery following the plasma treatment was registered.

View Article and Find Full Text PDF

The opening of holes in self-supported thin (nanoscaled) water films has been investigated in situ with the environmental scanning electron microscope. The opening of a hole occurs within a two-stage process. In the first stage, the rim surrounding a hole is formed, resembling the process that is observed under the puncturing of soap bubbles.

View Article and Find Full Text PDF

The fine structure of the three-phase (triple) line was studied for different liquids, various topographies of micro-rough substrates and various wetting regimes. Wetting of porous and pillar-based micro-scaled polymer surfaces was investigated. The triple line was visualized with the environmental scanning electron microscope and scanning electron microscope for the "frozen" triple lines.

View Article and Find Full Text PDF

Increase in anthropogenic pCO2 alters seawater chemistry and could lead to reduced calcification or skeleton dissolution of calcifiers and thereby weaken coral-reef structure. Studies have suggested that the complex and diverse responses in stony coral growth and calcification, as a result of elevated pCO2, can be explained by the extent to which their soft tissues cover the underlying skeleton. This study compared the effects of decreased pH on the microstructural features of both in hospite (within the colony) and isolated sclerites (in the absence of tissue protection) of the zooxanthellate reef-dwelling octocoral Ovabunda macrospiculata.

View Article and Find Full Text PDF

Two related aspects of nano-droplet condensation and droplets coalescence are studied for droplets on self-supported thin water films. The experiments are conducted in the environmental scanning electron microscope using wet scanning transmission electron microscopy. Favorable condensation sites are examined and in-situ position-controlled condensation experiments are conducted.

View Article and Find Full Text PDF

The fine structure of the triple line for water droplets deposited on porous polymer substrates was investigated. Substrates were obtained with the breath-figures self-assembly. Water droplets demonstrated the pronounced Cassie-Baxter wetting regime.

View Article and Find Full Text PDF

A prize for the ribbons: High-quality crystalline semiconducting nanoribbons can be prepared by "unwrapping" core-shell nanowire precursors. For example, Ge nanowires were coated with a Si shell and the top surface was carved by etching whereas the sides were protected by a thin layer of photoresist material. Finally the Ge core was removed selectively by chemical means to give fully opened and flat nanoribbon structures.

View Article and Find Full Text PDF

This paper presents experimental characterization of plasmoids (fireballs) obtained by directing localized microwave power (<1 kW at 2.45 GHz) onto a silicon-based substrate in a microwave cavity. The plasmoid emerges up from the hotspot created in the solid substrate into the air within the microwave cavity.

View Article and Find Full Text PDF

In this work, the electrophoretic-deposition (EPD) method was used to fabricate pristine and composite ceramic-polymer membranes for application in planar and 3D microbattery configurations. The major focus was on the effect of polyethyleneimine additive on the morphology, composition, and electrochemical properties of the membrane. The ionic conductivity, cycleability, and charge/discharge behavior of planar LiFePO(4)/Li cells comprising composite porous YSZ-based membrane with impregnated LiPF(6) EC:DEC electrolyte were found to be similar to the cells with commercial Celgard membrane.

View Article and Find Full Text PDF

To fully exploit their full potential, new semiconductor nanowire building blocks with ab initio controlled shapes are desired. However, and despite the great synthetic advances achieved, the ability to control nanowire's geometry has been significantly limited. Here, we demonstrate a simple confinement-guided nanowire growth method that enables to predesign not only the chemical and physical attributes of the synthesized nanowires but also allows a perfect and unlimited control over their geometry.

View Article and Find Full Text PDF

Phase transitions in organic and inorganic materials are well-studied classical phenomena, where a change in the crystal space group symmetry induces a wide variation of physical properties, permitted by the crystalline symmetry in each phase. Here we observe a conformational induced transition in bioinspired peptide nanotubes (PNTs). We found that the PNTs change their original molecular assembly from a linear peptide conformation to a cyclic one, followed by a change of the nanocrystalline structure from a noncentrosymmetric hexagonal space group to a centrosymmetric orthorhombic space group.

View Article and Find Full Text PDF

The dynamics of water condensation on self-supported thin films was studied at the nanoscale using transmitted electrons in an environmental scanning electron microscope. The initial stages of nucleation and growth over nanothick water films have been investigated. Irregularities at the water-film boundaries constituted nucleation sites for asymmetric dropwise and filmwise condensation.

View Article and Find Full Text PDF

The preparation of conductive and transparent gold/silver nanowire mesh films is reported. The nanowires formed after the reduction of the metal ions was triggered and a thin growth solution film was spread on a substrate. Metal reduction progressed within a template of a highly concentrated surfactant liquid crystalline mesostructure formed on the substrate during film drying to form ordered bundles of ultrathin nanowires.

View Article and Find Full Text PDF

The secondary electron (SE) signal over a cleaved surface of GaAs p-i-n solar cells containing stacks of quantum wells (QWs) is analyzed by high-resolution scanning electron microscopy. The InGaAs QWs appear darker than the GaAsP barriers, which is attributed to the differences in electron affinity. This method is shown to be a powerful tool for profiling the conduction band minimum across junctions and interfaces with nanometer resolution.

View Article and Find Full Text PDF

Osseointegration, in terms of the bone apposition ratio (BAR) and the new bone area (NBA), was measured by backscattered electron imaging. The results were compared for four implant types: grit-blasted and NaOH-treated Ti-6Al-4V (Uncoated-NaOH), electrodeposited with hydroxyapatite without alkali treatment (ED-HAp), electrodeposited with hydroxyapatite after alkali treatment (NaOH-ED-HAp), and plasma sprayed with hydroxyapatite (PS-HAp). No heat treatment was done after soaking in NaOH.

View Article and Find Full Text PDF

The mechanisms of floating and sliding of liquid marbles are studied. Liquid marbles containing CaCl(2) and marbles containing NaOH water solutions float on water containing Na(2)CO(3) and an alcoholic solution of phenolphthalein with no chemical reaction. Sliding of liquid marbles, consisting of NaOH water solutions, on polymer substrates coated with phenolphthalein is studied as well.

View Article and Find Full Text PDF

New drug-encapsulating particles were investigated using bright field (BF) scanning transmission electron microscopy (STEM) in a field emission gun (FEG) scanning electron microscope (SEM). Thickness characterization was done based on measuring the effective cross-section for interaction in our sample-detector configuration using calibration particles. A simplified analytical model, taking account of BF-STEM contrast and effective cross-section for interaction, was utilized for transforming projected two-dimensional BF-STEM images into three-dimensional thickness images.

View Article and Find Full Text PDF