Porous titanium scaffolds modified with Zeolitic Imidazolate Framework (ZIF-8) with enhanced osteogenic activity for the prevention of implant-associated infections.

In this study, zeolitic imidazolate framework 8 (ZIF-8) was coated on porous Ti6Al4V scaffolds, either bare or previously modified using hydroxyapatite (HA) or HA and gelatin (HAgel), via a growing single-step method in aqueous media using two contact times at 6 h and 24 h. The coated scaffolds termed ZIF-8@Ti, ZIF-8@HA/Ti, and ZIF-8@HAgel/Ti were characterized via scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR), and molecular plasma-atomic emission spectroscopy (MP-AES). In order to assess the cell proliferation rate, the cytocompatibility of the scaffolds was evaluated in primary osteoblasts (hOBs) using alamarBlue assay, while the osteoconductivity was analyzed in hOBs using a real-time approach, evaluating the expression of secreted phosphoprotein 1 (SPP1).

Re-designing nano-silver technology exploiting one-pot hydroxyethyl cellulose-driven green synthesis.

Re-designing existing nano-silver technologies to optimize efficacy and sustainability has a tangible impact on preventing infections and limiting the spread of pathogenic microorganisms. Advancements in manufacturing processes could lead to more cost-effective and scalable production methods, making nano-silver-based antimicrobial products more accessible in various applications, such as medical devices, textiles, and water purification systems. In this paper, we present a new, versatile, and eco-friendly one-pot process for preparing silver nanoparticles (AgNPs) at room temperature by using a quaternary ammonium salt of hydroxyethyl cellulose (HEC), a green ingredient, acting as a capping and reducing agent.

Multi-Layer PVA-PANI Conductive Hydrogel for Symmetrical Supercapacitors: Preparation and Characterization.

This work describes a simple, inexpensive, and robust method to prepare a flexible "all in one" integrated hydrogel supercapacitors (HySCs). Preparing smart hydrogels with high electrical conductivity, ability to stretch significantly, and excellent mechanical properties is the last challenge for tailored wearable devices. In this paper, we employed a physical crosslinking process that involves consecutive freezing and thawing cycles to prepare a polyvinyl alcohol (PVA)-based hydrogel.

Preparation and Characterization of Self-Healing PVA-HSO Hydrogel for Flexible Energy Storage.

In the past decade, hydrogels have attracted growing interest for emerging applications in flexible electronic devices, human-machine interactions, energy supply, or energy storage. Developing a multifunctional gel architecture with superior ionic conductivity and good mechanical flexibility is a bottleneck to overcome. Herein, poly(vinyl alcohol)/sulfuric acid (PVA-HSO) hydrogels were prepared via a freeze-thaw method.

Cellulose/Zeolitic Imidazolate Framework (ZIF-8) Composites with Antibacterial Properties for the Management of Wound Infections.

Metal-organic frameworks (MOFs) are a class of crystalline porous materials with outstanding physical and chemical properties that make them suitable candidates in many fields, such as catalysis, sensing, energy production, and drug delivery. By combining MOFs with polymeric substrates, advanced functional materials are devised with excellent potential for biomedical applications. In this research, Zeolitic Imidazolate Framework 8 (ZIF-8), a zinc-based MOF, was selected together with cellulose, an almost inexhaustible polymeric raw material produced by nature, to prepare cellulose/ZIF-8 composite flat sheets via an in-situ growing single-step method in aqueous media.

Polyaniline/poly (2-acrylamido-2-methyl-1-propanesulfonic acid) modified cellulose as promising material for sensors design.

A material based on cellulose coated with polyaniline/poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (Cell/PANI-PAMPSA) was synthesized in a simple way starting from cellulose fibres, aniline and using PAMPSA as dopant. The morphology, mechanical properties, thermal stability, and electrical conductivity were investigated by means of several complementary techniques. The obtained results highlight the excellent features of the Cell/PANI-PAMPSA composite with respect to the Cell/PANI one.

A resistive sensor for humidity detection based on cellulose/polyaniline.

Ambient humidity is an important parameter that affects the manufacturing and storage of several industrial and agricultural goods. In the view of the Internet of Things (IoT), single sensors could be associated with an object for smart monitoring enabling optimum conditions to be maintained. Nevertheless, the production of cost-effective humidity sensors for indoor and outdoor environmental monitoring currently represents the main bottleneck in the development of this technology.

Effectiveness of Snail Slime in the Green Synthesis of Silver Nanoparticles.

The development of green, low cost and sustainable synthetic routes to produce metal nanoparticles is of outmost importance, as these materials fulfill large scale applications in a number of different areas. Herein, snail slime extracted from snails was successfully employed both as bio-reducing agent of silver nitrate and as bio-stabilizer of the obtained nanoparticles. Several trials were carried out by varying temperature, the volume of snail slime and the silver nitrate concentration to find the best biogenic pathway to produce silver nanoparticles.

A Cu(II)-MOF Based on a Propargyl Carbamate-Functionalized Isophthalate Ligand as Nitrite Electrochemical Sensor.

This paper investigates the electrochemical properties of a new Cu(II)-based metal-organic framework (MOF). Noted as Cu-YBDC, it is built upon a linker containing the propargyl carbamate functionality and immobilized on a glassy carbon electrode by drop-casting (GC/Cu-YBDC). Afterward, GC/Cu-YBDC was treated with HAuCl and the direct electro-deposition of Au nanoparticles was carried at 0.

A simple and industrially scalable method for making a PANI-modified cellulose touch sensor.

In this work we present a simple, inexpensive, and easily scalable industrial paper process to prepare sheets of conductive cellulose fibers coated with polyanilines. First, bare fibers were coated by in situ oxidative polymerization of polyaniline then, the resulting composite fibers were used to fabricate electroactive sheets. The resistivity of the sheets is 14 ± 1 Ω sq, a value around 1000 times lower than those reported in literature.

Magnetic Nanoparticles Coated with ()-9-Acetoxystearic Acid for Biomedical Applications.

The well-known ability to selectively drive nanomagnetic materials coated with anticancer drugs into tumor cells suggested the synthesis and the characterization of magnetic nanoparticles (MNPs) functionalized with ()-9-acetoxystearic acid, the acetic ester of ()-9-hydroxystearic acid (9-HSA), an antiproliferative agent active against different cancer cells. The acyl chloride of ()-9-acetoxystearic acid, synthesized in two steps from 9-HSA, was reacted with (3-aminopropyl)triethoxysilane, chosen as a linker between MNPs and the stearyl moiety. In the last step, the novel amide was bound to magnetite NPs by reaction with silyl groups.

Discovery and development of NA-1 for the treatment of acute ischemic stroke.

Stroke creates a complex interplay of multiple signaing pathways including excitotoxicity, ionic imbalance, inflammation, oxidative stress and apoptosis. There are very few treatments that have been shown to be beneficial in acute stroke. Recent findings have provided insights into the pathophysiology and mechanisms of ischemic stroke, complementing the traditional glutamate hypothesis: the molecular interaction between PSD95 and GluN2B has been identified as a culprit in stroke-mediated excitotoxicity, leading to the discovery of NA-1, a peptide that disrupts that interaction, as a potent neuroprotective agent for the treatment of acute stroke.

A new model of nerve injury in the rat reveals a role of Regulator of G protein Signaling 4 in tactile hypersensitivity.

Tactile hypersensitivity is one of the most debilitating symptoms of neuropathic pain syndromes. Clinical studies have suggested that its presence at early postoperative stages may predict chronic (neuropathic) pain after surgery. Currently available animal models are typically associated with consistent tactile hypersensitivity and are therefore limited to distinguish between mechanisms that underlie tactile hypersensitivity as opposed to mechanisms that protect against it.

Speciation of Gold Nanoparticles by Ex Situ Extended X-ray Absorption Fine Structure and X-ray Absorption Near Edge Structure.

A combined X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) methodology is here presented on a series of partially and fully reduced Au(III) samples. This allows monitoring the relative fraction of Au(III) and Au(0) in the studied samples, displaying a consistent and independent outcome. The strategy followed is based, for the first time, on two structural models that can be fitted simultaneously, and it evaluates the correlation among strongly correlated parameters such as coordination number and the Debye-Waller factor.

Hydrogen Adsorption Properties of Carbon Nanotubes and Platinum Nanoparticles from a New Ammonium-Ethylimidazolium Chloroplatinate Salt.

Self-supporting membranes built entirely of carbon nanotubes have been prepared by wet methods and characterized by Raman spectroscopy. The membranes are used as supports for the electrodeposition of Pt nanoparticles without the use of additional additives and/or stabilizers. The Pt precursor is an ad hoc synthesized ammonium-ethylimidazolium chloroplatinate(IV) salt, [NH3 (CH2 )2 MIM)][PtCl6 ].

Injectable hydrogel promotes early survival of induced pluripotent stem cell-derived oligodendrocytes and attenuates longterm teratoma formation in a spinal cord injury model.

Transplantation of pluripotent stem cells and their differentiated progeny has the potential to preserve or regenerate functional pathways and improve function after central nervous system injury. However, their utility has been hampered by poor survival and the potential to form tumors. Peptide-modified biomaterials influence cell adhesion, survival and differentiation in vitro, but their effectiveness in vivo remains uncertain.

Fluoroalkylsilanes with Embedded Functional Groups as Building Blocks for Environmentally Safer Self-Assembled Monolayers.

The fabrication of silane-based fluorinated self-assembled monolayers (FSAMs) on indium tin oxide (ITO, a transparent electrode) was carried out making use of the following fluoroalkylsilanes (FAS): 2,2,3,3,4,4,5,5,6,6,6-undecafluoro-N-[3-(trimethoxysilyl)propyl]hexanamide (1; R(F) = C5F11) and 1,1,2,2,3,3,4,4,4-nonafluoro-N-[3-(trimethoxysilyl)propyl]butane-1-sulfonamide (2; R(F) = C4F9), containing an embedded amide and a sulfonamide group, respectively, between the short perfluoroalkyl chain (R(F) with C < 6) and the syloxanic moiety. The obtained FSAM-modified/ITO systems were characterized by X-ray photoelectron spectroscopy (XPS), contact angle (CA), surface energy measurements, and electrochemical impedance spectroscopy (EIS) and compared to ITO modified with a 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyltriethoxysilane (3; R(F) = C6F13), with the perfluoroalkyl group linked to the syloxanic moiety through a simple hydrocarbon chain. The results obtained show that the presence of the -NHCO- and -NHSO2- groups have a different mode of action and, with the former, despite the short perfluoroalkyl chain, the ITO-1 system presents a CA (Θ(water )= 113.

Formaldehyde replacement with glyoxylic acid in semipermanent hair straightening: a new and multidisciplinary investigation.

Objective: Formaldehyde is an effective and popular semipermanent hair straightener, but the severe consequences for human health due to its toxicity have prompted the search for safer alternatives. Different carbonyl compounds, including glyoxylic acid, have recently been proposed as promising candidates. Despite the interest in this topic, there is a lack of information about the interactions between hair keratin and straightener agents.

Combined experimental and theoretical investigation of the hemi-squaraine/TiO2 interface for dye sensitized solar cells.

A simple hemi-squaraine dye (CT1) has been studied as a TiO2 sensitizer for application in dye sensitized solar cells (DSCs) by means of a combined experimental and theoretical investigation. This molecule is a prototype dye presenting an innovative anchoring group: the squaric acid moiety. Ab initio calculations based on Density Functional Theory (DFT) predict that this acid spontaneously deprotonates at the anatase (101) surface forming chemical bonds that are stronger than the ones formed by other linkers (e.

Synthesis of nanostructured magnetic photocatalyst by colloidal approach and spray-drying technique.

Nanostructured particles with a magnetic core and a photocatalytic shell are very interesting systems for their properties to be magnetically separable (and so reusable) in photocatalytic water depuration implant. Here, a robust, low time-consuming, easily scale up method to produce Fe(3)O(4)/SiO(2)/TiO(2) hierarchical nanostructures starting from commercial precursors (i.e.

Primary amino-functionalized N-heterocyclic carbene ligands as support for Au(I)···Au(I) interactions: structural, electrochemical, spectroscopic and computational studies of the dinuclear [Au2(NH2(CH2)2imMe)2][NO3]2.

The N-heterocyclic carbene (NHC) precursor, 1-(2-aminoethyl)-3-methylimidazolium nitrate, [NH(2)(CH(2))(2)imMe)]NO(3) ([3][NO(3)]) reacted with Ag(2)CO(3) in dimethyl sulfoxide readily yielding a Ag(I)-(NHC-NH(2)) complex presenting limited stability in solution. The in situ carbene transfer reaction of the latter with [Au(tht)Cl] afforded the first example of a dinuclear gold(I) complex [Au(2)(NH(2)(CH(2))(2)imMe)(2)][NO(3)](2) ([5][NO(3)](2)) bearing a primary amino-functionalized NHC ligand. The complex has been characterized by NMR, mass spectrometry, X-ray crystallography and cyclic voltammetry; the electrochemical behaviour and photophysical properties of [5][NO(3)](2) have been also investigated and the experimental data have been compared with density functional theory (DFT) and Time Dependent (TDDFT) calculations.

RF-sputtering preparation of gold-nanoparticle-modified ITO electrodes for electrocatalytic applications.

The preparation of gold-nanoparticle (AuNPs)-modified indium tin oxide (ITO) electrodes (AuNPs/ITO) was performed by radio-frequency (RF) sputtering from Ar plasmas at temperatures as low as 60 °C, tailoring the AuNP morphology and content as a function of the sole sputtering time. The latter parameter was varied from 5 to 20 min in order to investigate the influence of gold amount and distribution on the electrochemical performances of the resulting AuNPs/ITO systems. The electrodes were characterized using field emission-scanning electron microscopy (FE-SEM), UV-vis absorption and x-ray photoelectron spectroscopies (XPS); moreover variable scan rate cyclic voltammetry (CV) studies were performed to examine their electrochemical behavior.

A templated electrosynthesis of macroporous NiAl layered double hydroxides thin films.

Colloidal crystals of polystyrene (PS) beads self-assembled on Pt electrode were used as a sacrificial template to electrosynthesis thin films of macroporous Layered Double Hydroxides (LDH). Such nanostructured materials display a high internal surface area and porosity leading to enhanced electrochemical performance.