Direct observation of β-alkynyl eliminations from unstrained propargylic alkoxide Cu(i) complexes by C-C bond cleavage.

β-Carbon eliminations of aryl, allylic, and propargylic alkoxides of Rh(i), Pd(ii), and Cu(i) are key elementary reactions in the proposed mechanisms of homogeneously catalysed cross-coupling, group transfer, and annulation. Besides the handful of studies with isolable Rh(i)-alkoxides, β-carbon eliminations of Pd(ii)- and Cu(i)-alkoxides are less definitive. Herein, we provide a comprehensive synthetic, structural, and mechanistic study on the β-alkynyl eliminations of isolable secondary and tertiary propargylic alkoxide Cu(i) complexes, LCuOC(H)(Ph)C[triple bond, length as m-dash]CPh and LCuOC(Ar)C[triple bond, length as m-dash]CPh (L = N-heterocyclic carbene (NHC), dppf, -BINAP), to produce monomeric (NHC)CuC[triple bond, length as m-dash]CPh, dimeric [(diphosphine)CuC[triple bond, length as m-dash]CPh], and the corresponding carbonyl.

Single-Crystal to Single-Crystal Transformations: Stepwise CO Insertions into Bridging Hydrides of [(NHC)CuH] Complexes.

Mechanistic studies of substrate insertion into dimeric [(NHC)CuH] (NHC=N-heterocyclic carbene) complexes with two bridging hydrides have been shown to require dimer dissociation to generate transient, highly reactive (NHC)Cu-H monomers in solution. Using single-crystal to single-crystal (SC-SC) transformations, we discovered a new pathway of stepwise insertion of CO into [(NHC)CuH] without complete dissociation of the dimer. The first CO insertion into dimeric [(IPr*OMe)CuH] (IPr*OMe=N,N'-bis(2,6-bis(diphenylmethyl)-4-methoxy-phenyl)imidazole-2-ylidene) produced a dicopper formate hydride [(IPr*OMe)Cu] (μ-1,3-O CH)(μ-H).

Mechanistic Studies of Carbonyl Allylation Mediated by (NHC)CuH: Isoprene Insertion, Allylation, and β-Hydride Elimination.

The ability of Cu-H complexes to undergo selective insertion of unsaturated hydrocarbons under mild conditions has rendered them valuable, versatile catalysts. The direct formation of Cu allyl intermediates from unfunctionalized 1,3-dienes and transient Cu hydrides is an appealing strategy for upgrading conjugated diene feedstocks. However, empirical mechanistic studies of the underlying elementary steps and characterization of key intermediates in Cu-H catalysis are sparse.

Challenges to developing materials for the transport and storage of hydrogen.

Hydrogen has the highest gravimetric energy density of any energy carrier and produces water as the only oxidation product, making it extremely attractive for both transportation and stationary power applications. However, its low volumetric energy density causes considerable difficulties, inspiring intense efforts to develop chemical-based storage using metal hydrides, liquid organic hydrogen carriers and sorbents. The controlled uptake and release of hydrogen by these materials can be described as a series of challenges: optimal properties fall within a narrow range, can only be found in few materials and often involve important trade-offs.

Isolation of a Cu-H Monomer Enabled by Remote Steric Substitution of a -Heterocyclic Carbene Ligand: Stoichiometric Insertion and Catalytic Hydroboration of Internal Alkenes.

Transient Cu-H monomers have long been invoked in the mechanisms of substrate insertion in Cu-H catalysis. Their role from Cu-H aggregates has been mostly inferred since ligands to stabilize these monomeric intermediates for systematic studies remain limited. Within the last decade, new sterically demanding -heterocyclic carbene (NHC) ligands have led to isolable Cu-H dimers and, in some cases, spectroscopic characterization of Cu-H monomers in solution.

Thermal stability and structural studies on the mixtures of Mg(BH) and glymes.

Coordination complexes of Mg(BH) are of interest for energy storage, ranging from hydrogen storage in BH to electrochemical storage in Mg based batteries. Understanding the stability of these complexes is crucial since storage materials are expected to undergo multiple charging and discharging cycles. To do so, we examined the thermal stabilities of the 1 : 1 mixtures of Mg(BH) with different glymes by DSC-TGA, TPD-MS and powder XRD analysis.

Accelerating the insertion reactions of (NHC)Cu-H remote ligand functionalization.

Most ligand designs for reactions catalyzed by (NHC)Cu-H (NHC = N-heterocyclic carbene ligand) have focused on introducing steric bulk near the Cu center. Here, we evaluate the effect of remote ligand modification in a series of [(NHC)CuH] in which the substituent (R) on the -aryl groups of the NHC is Me, Et, Bu, OMe or Cl. Although the R group is distant (6 bonds away) from the reactive Cu center, the complexes have different spectroscopic signatures.

Mechanistic Studies on the Insertion of Carbonyl Substrates into Cu-H: Different Rate-Limiting Steps as a Function of Electrophilicity.

We report mechanistic studies on the insertion reactions of [(NHC)Cu(μ-H)] complexes with carbonyl substrates by UV-vis and H NMR spectroscopic kinetic studies, H/D isotopic labelling, and X-ray crystallography. The results of these comprehensive studies show that the insertion of Cu-H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu-H monomer from Cu-H dimer for more electrophilic substrates, and hydride transfer from a transient Cu-H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu-hemiacetalate and Cu-hemiaminalate moieties from the insertion of an ester or amide into the Cu-H bond.

Cyclo-P₃ Complexes of Vanadium: Redox Properties and Origin of the ³¹P NMR Chemical Shift.

The synthesis and characterization of two high-valent vanadium-cyclo-P3 complexes, (nacnac)V(cyclo-P3)(Ntolyl2) (1) and (nacnac)V(cyclo-P3)(OAr) (2), and an inverted sandwich derivative, [(nacnac)V(Ntolyl2)]2(μ2-η(3):η(2)-cyclo-P3) (3), are presented. These novel complexes are prepared by activating white phosphorus (P4) with three-coordinate vanadium(II) precursors. Structural metrics, redox behavior, and DFT electronic structure analysis indicate that a [cyclo-P3](3-) ligand is bound to a V(V) center in monomeric species 1 and 2.

Addition of Si-H and B-H bonds and redox reactivity involving low-coordinate nitrido-vanadium complexes.

In this study we enumerate the reactivity for two molecular vanadium nitrido complexes of [(nacnac)V≡N(X)] formulation [nacnac = (Ar)NC(Me)CHC(Me)(Ar)(-), Ar = 2,6-(CHMe2)2C6H3); X(-) = OAr (1) and N(4-Me-C6H4)2 (Ntolyl2) (2)]. Density functional theory calculations and reactivity studies indicate the nitride motif to have nucleophilic character, but where the nitrogen atom can serve as a conduit for electron transfer, thus allowing the reduction of the vanadium(V) metal ion with concurrent oxidation of the incoming substrate. Silane, H2SiPh2, readily converts the nitride ligand in 1 into a primary silyl-amide functionality with concomitant two-electron reduction at the vanadium center to form the complex [(nacnac)V{N(H)SiHPh2}(OAr)] (3).

Copper-catalyzed oxidative dehydrogenative carboxylation of unactivated alkanes to allylic esters via alkenes.

We report copper-catalyzed oxidative dehydrogenative carboxylation (ODC) of unactivated alkanes with various substituted benzoic acids to produce the corresponding allylic esters. Spectroscopic studies (EPR, UV-vis) revealed that the resting state of the catalyst is [(BPI)Cu(O2CPh)] (1-O2CPh), formed from [(BPI)Cu(PPh3)2], oxidant, and benzoic acid. Catalytic and stoichiometric reactions of 1-O2CPh with alkyl radicals and radical probes imply that C-H bond cleavage occurs by a tert-butoxy radical.

Copper-catalyzed intermolecular amidation and imidation of unactivated alkanes.

We report a set of rare copper-catalyzed reactions of alkanes with simple amides, sulfonamides, and imides (i.e., benzamides, tosylamides, carbamates, and phthalimide) to form the corresponding N-alkyl products.

3d early transition metal complexes supported by a new sterically demanding aryloxide ligand.

The bulky aryloxide 2,6-bis(diphenylmethyl)-4-tert-butylphenol [HOAr(tBu)] (1) can be synthesized from 4-tert-butylphenol and benzhydrol in solvent-free conditions and obtained pure in 91% yield. Deprotonation of HOAr(tBu) is accomplished with M(N(SiMe3)2) (M = Na, Li), yielding the corresponding salts of the aryloxide [MOAr(tBu)] (M(+) = Na (2), Li(3)) in 83% and 73% yield, respectively. Facile salt formation of the aryloxide ligand allows for transmetalation to a variety of metal halides.

Uranium(III) complexes with bulky aryloxide ligands featuring metal-arene interactions and their reactivity toward nitrous oxide.

We report the synthesis and use of an easy-to-prepare, bulky, and robust aryloxide ligand starting from inexpensive precursor materials. Based on this aryloxide ligand, two reactive, coordinatively unsaturated U(III) complexes were prepared that are masked by a metal-arene interaction via δ-backbonding. Depending on solvent and uranium starting material, both a tetrahydrofuran (THF)-bound and Lewis-base-free U(III) precursor can easily be prepared on the multigram scale.

A four-coordinate thionitrosyl complex of vanadium.

Addition of elemental sulfur to the vanadium nitride [(nacnac)V≡N(OAr)] forms the first thionitrosyl complex of vanadium, [(nacnac)V(NS)(OAr)]. Single crystal X-Ray diffraction studies and DFT calculations reveal an almost linear thionitrosyl ligand resulting from an extended π-resonance across the VNS moiety.

A mononuclear Fe(III) single molecule magnet with a 3/2↔5/2 spin crossover.

The air stable complex [(PNP)FeCl(2)] (1) (PNP = N[2-P(CHMe(2))(2)-4-methylphenyl](2)(-)), prepared from one-electron oxidation of [(PNP)FeCl] with ClCPh(3), displays an unexpected S = 3/2 to S = 5/2 transition above 80 K as inferred by the dc SQUID magnetic susceptibility measurement. The ac SQUID magnetization data, at zero field and between frequencies 10 and 1042 Hz, clearly reveal complex 1 to have frequency dependence on the out-of-phase signal and thus being a single molecular magnet with a thermally activated barrier of U(eff) = 32-36 cm(-1) (47-52 K). Variable-temperature Mössbauer data also corroborate a significant temperature dependence in δ and ΔE(Q) values for 1, which is in agreement with the system undergoing a change in spin state.

A planar three-coordinate vanadium(II) complex and the study of terminal vanadium nitrides from N2: a kinetic or thermodynamic impediment to N-N bond cleavage?

We report the first mononuclear three-coordinate vanadium(II) complex [(nacnac)V(ODiiP)] and its activation of N2 to form an end-on bridging dinitrogen complex with a topologically linear V(III)N2V(III) core and where each vanadium center antiferromagnetically couples to give a ground state singlet with an accessible triplet state as inferred by HFEPR spectroscopy. In addition to investigating the conversion of N2 to the terminal nitride (as well as the microscopic reverse process), we discuss its similarities and contrasts to the isovalent d(3) system, [Mo(N[(t)Bu]Ar)3], and the S = 1 system [(Ar[(t)Bu]N)3Mo]2(μ2-η(1):η(1)-N2).

A four coordinate parent imide via a titanium nitridyl.

Treatment of d(1) [(nacnac)TiCl(Ntol(2))] with NaN(3) results in NaCl formation and N(2) ejection to yield the first four coordinate, parent imide [(nacnac)Ti=NH(Ntol(2))] (nacnac(-)=[ArNC(CH(3))](2)CH, Ar = 2,6-iPr(2)C(6)H(3), tol = 4-CH(3)C(6)H(4)).

Low-coordinate and neutral nitrido complexes of vanadium.

Two neutral and four-coordinate vanadium(V)-nitrido complexes have been prepared via the thermolysis of metastable vanadium(III)-azido precursors. All complexes have been fully characterized by multinuclear NMR, FT-IR, isotopic labeling, and, in most instances, single crystal X-ray diffraction. On the basis of activation parameters, N(2) extrusion to form the V[triple bond]N moiety is proposed to occur via an ordered and early transition state having three- or four-triazametallacycle frameworks.

Facile entry to 3d late transition metal boryl complexes.

Mononuclear nickel and cobalt boryl complexes have been prepared via sigma-bond metathesis reactions and in the case of nickel, an intermediate comprised of a Lewis acid-base type adduct has been experimentally detected by (31)P NMR spectroscopy and its structure probed by DFT calculations.

Oxo-molybdenum(VI,V,IV) complexes of the facially coordinating tris(mercaptoimidazolyl)borate ligand: synthesis, characterization, and oxygen atom transfer reactivity.

A series of monooxo-Mo(IV,V) and dioxo-Mo(VI) complexes of the "soft" tripodal ligand, sodium tris(mercaptoimidazolyl)borate (NaTm(Me)), have been synthesized as potential oxygen atom transfer (OAT) models for sulfite oxidase. Complexes have been characterized by X-ray crystallography, cyclic voltammetry, and EPR, where appropriate. Oxygen atom transfer kinetics of Tm(Me)MoO(2)Cl, both stoichiometric and catalytic, have been studied by a combination of UV-vis and (31)P NMR spectroscopies under a variety of conditions.

Oxidation-state and metal-ion dependent stereoisomerization in oxo molybdenum and tungsten complexes of a bulky alkoxy heteroscorpionate ligand.

Monooxo Mo(V) complexes of a N2O heteroscorpionate ligand designated (L10O) are found to exist as isolable cis and trans isomers. We have been able to trap the kinetically labile cis isomer and follow its isomerization to the thermodynamically more stable trans form. We have also followed the kinetics of isomerization between the cis and trans isomers of the corresponding dioxo Mo(VI) and W(VI) species.

Flavothionato metal complexes: implications for the use of hydroxyflavothiones as green pesticides.

Transition-metal complexes of 3-hydroxyflavothiones have been prepared and structurally characterized; the photochemical properties of these complexes have been examined and are discussed in the context of the use of these compounds as photodegradable pesticides.

Potent, selective pyrone-based inhibitors of stromelysin-1.

In an effort to develop alternatives to hydroxamate-based matrix metalloproteinase inhibitors (MPIs), we have utilized the drug discovery program LUDI enhanced with the structural coordinates of a bioinorganic model complex. This method has yielded the first pyrone-based MPIs. The inhibitors demonstrate nanomolar potency against MMP-3 and are selective for MMP-3 over MMP-2 and MMP-1.