Publications by authors named "Aysun Savk"

Monodisperse nickel/copper nanohybrids (NiCu@MWCNT) based on multi-walled carbon nanotubes (MWCNT) were prepared for the Knoevenagel condensation of aryl and aliphatic aldehydes. The synthesis of these nanohybrids was carried out by the ultrasonic hydroxide assisted reduction method. NiCu@MWCNT nanohybrids were characterized by analytical techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy.

View Article and Find Full Text PDF

In this study, the effects of silica-based gold-nickel (AuNi@SiO) nanohybrid to the production of hydrogen from dimethylamine borane (DMAB) were investigated. AuNi@SiO nanohybrid constructs were prepared as nanocatalysts for the dimethylamine borane dehydrogenation. The prepared nanohybrid structures were exhibited high catalytic activity and a stable form.

View Article and Find Full Text PDF

In this study, we report a facile and effective production process of palladium nanoparticles supported on polypyrrole/reduced graphene oxide (rGO/Pd@PPy NPs). A novel electrochemical sensor was fabricated by incorporation of the prepared NPs onto glassy carbon electrode (GCE) for the simultaneous detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The electrodes modified with rGO/Pd@PPy NPs were well decorated on the GCE and exhibited superior catalytic activity and conductivity for the detection of these molecules with higher current and oxidation peak intensities.

View Article and Find Full Text PDF

In this work, highly monodispersed palladium-nickel (Pd-Ni) nanoparticles supported on reduced graphene oxide (rGO) were synthesized by the microwave-assisted methodology. The synthesized nanoparticles were used for modification of a glassy carbon electrode (GCE) to produce our final product as PdNi@rGO/GCE, which were utilized for non-enzymatic detecting of glucose. In the present study, electrochemical impedance spectroscopy (EIS), chronoamperometry (CA) and, cyclic voltammetry (CV) methods were implemented to investigate the sensing performance of the developed glucose electrode.

View Article and Find Full Text PDF

In this paper, we present the synthesis, characterization, catalytic and computational studies of Composites of Platinum-Iridium Alloy Nanoparticles and Graphene Oxide (PtIr@GO) for dimethylamine borane (DMAB) dehydrogenation. The prepared PtIr@GO nanocatalysts were synthesized using an ethanol super-hydride method, and the characterization procedures for PtIr@GO alloy nanoparticles were carried out by various advanced spectroscopic methods like X-ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission Electron Microscopy(TEM) and high-resolution transmission electron microscopy (HRTEM). Additionally, catalytic activity, reusability, substrate concentration, and catalyst concentration experiments were performed for DMAB dehydrogenation catalyzed by PtIr@GO alloy nanomaterials.

View Article and Find Full Text PDF

The ultimate aim of this study is to produce a composite of bimetallic platinum-cobalt nanoparticles and reduced graphene oxide (Pt-Co@rGO) based biosensor for the detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Those are biologically important molecules with the key functions for the human body. Pt-Co@rGO was synthesized using a microwave-assisted technique and utilized for the production of a highly sensitive and stable electrochemical biosensor.

View Article and Find Full Text PDF

An electrochemical non-enzymatic sensor was developed for the detection of glucose based on an electrode modified with monodisperse platinum-nickel nanocomposites-decorated on reduced graphene oxide (Pt/Ni@rGO) which was synthesized using a new ultrasonic hydroxide assisted reduction method. Because the nanocomposites prepared by using NaOH (OH ligands) are much smaller nanocomposites on the supports compared to the ones without OH ligands. Such a monodisperse Pt/Ni@rGO nanocomposites-based electrode exhibited a high electrochemical activity for electrocatalytic oxidation of glucose in alkaline solution.

View Article and Find Full Text PDF

A novel multiwalled carbon nanotube (MWCNT) based sensor was fabricated as a highly precise and stable electrochemical sensor. The synthesized sensor which consists of ZnNi bimetallic nanoalloy called the ZnNi NPs@f-MWCNT sensor, have been used for the simultaneous detection of uric acid (UA), dopamine (DA) and ascorbic acid (AA). The ZnNi NPs@f-MWCNT sensor obtained based on the microwave irradiation process, and its characterization was performed by using several physical techniques such as XRD, XPS, TEM, Raman, etc.

View Article and Find Full Text PDF

In the present study, highly effective and reusable monodisperse ruthenium-nickel (Ru-Ni) nanomaterials supported on poly(N-vinyl-2-pyrrolidone) (Ru-Ni@PVP) were synthesized (3.51 ± 0.38 nm) by a facile sodium-hydroxide-assisted reduction method; Ru and Ni reduction in PVP solution was accomplished.

View Article and Find Full Text PDF

Dimethylamine borane (DMAB) has been considered as one of the important hydrogen sources with a simple process by the help of the efficient catalyst. For this purpose, herein, platinum nanoparticles (Pt NPs), placed inside carbon black hybrid (Pt NPs@CBH), activated carbon (Pt NPs@AC) and Vulcan carbon (Pt NPs@VC), have been prepared as highly monodisperse catalysts for dehydrogenation reactions of DMAB at room temperature. The morphological and physical structure of the monodisperse catalysts have been identified by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) etc.

View Article and Find Full Text PDF

Glucose enzyme biosensors have been used for a variety of applications such as medical diagnosis, bioprocess engineering, beverage industry and environmental scanning etc. and there is still a growing interest in glucose sensors. For this purpose, addressed herein, as a novel glucose sensor, highly sensitive activated carbon (AC) decorated monodisperse nickel and palladium alloy nanocomposites modified glassy carbon electrode (Ni-Pd@AC/GCE NCs) have been synthesized by in-situ reduction technique.

View Article and Find Full Text PDF

Addressed herein, we report the synthesis and characterization of a tert-nonyl mercaptan (TNM) functionalized reduced graphene oxide (rGO) supported palladium (Pd) nanoparticles (NPs) (Pd/TNM@rGO) as electrochemical sensor. The highly monodisperse Pd/TNM@rGO nanocomposite was applied for electrochemical determination of hydrogen peroxide (HO) at a potential range of -0.6 to +0.

View Article and Find Full Text PDF

Addressed herein, functionalized multi-walled carbon nanotube (MWCNT) supported highly monodisperse nickel nanoparticles modified on glassy carbon electrode (Ni@f-MWCNT/GCE) were synthesized through microwave assisted method and examined for non-enzymatic glucose sensing in ionic liquids by cyclic voltammetry and chronoamperometry. The results of Ni@f-MWCNT/GCE electrode were compared with Ni NPs/GCE electrode and the results revealed that f-MWCNTs increased the electrocatalytic properties of Ni nanoparticles regarding glucose oxidation. They also demonstrated a good linear span of 0.

View Article and Find Full Text PDF

A PHP Error was encountered

Severity: Warning

Message: fopen(/var/lib/php/sessions/ci_sessionkfj48d1aod1ts85ui6c8qc54cg158uf2): Failed to open stream: No space left on device

Filename: drivers/Session_files_driver.php

Line Number: 177

Backtrace:

File: /var/www/html/index.php
Line: 316
Function: require_once

A PHP Error was encountered

Severity: Warning

Message: session_start(): Failed to read session data: user (path: /var/lib/php/sessions)

Filename: Session/Session.php

Line Number: 137

Backtrace:

File: /var/www/html/index.php
Line: 316
Function: require_once