Membranes Based on Aminated Graphene Oxide with High Selectivity Toward Organic Substances.

In this work, membranes based on graphene oxide, modified with oleylamine, have been prepared by a simple wet chemistry protocol without the use of complex equipment, elevated temperature, and additional reagents. The membrane material was characterized by a set of physicochemical methods: thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy. The prepared membranes are stable in both aqueous and organic media.

Mechanisms related to carbon nanotubes genotoxicity in human cell lines of respiratory origin.

Potential genotoxicity and carcinogenicity of carbon nanotubes (CNT), as well as the underlying mechanisms, remains a pressing topic. The study aimed to evaluate and compare the genotoxic effect and mechanisms of DNA damage under exposure to different types of CNT. Immortalized human cell lines of respiratory origin BEAS-2B, A549, MRC5-SV40 were exposed to three types of CNT: MWCNT Taunit-M, pristine and purified SWCNT TUBALL™ at concentrations in the range of 0.

Novel Biodegradable Chelating Agents for Micronutrient Fertilization.

Serious concerns about the negative impact of ethylenediaminetetraacetic acid (EDTA) on the environment resulted in severe restrictions imposed on this compound in many countries. One of the main concerns is related to the use of EDTA in agriculture as a chelator in microelement fertilizers: being introduced directly into the sawing fields, it penetrates into groundwater, with no chance to be captured/recycled. Respectively, there is an active search for environmentally friendly, biodegradable alternatives for this chelator.

High Permittivity Polymer Composites on the Basis of Long Single-Walled Carbon Nanotubes: The Role of the Nanotube Length.

Controlling the permittivity of dielectric composites is critical for numerous applications dealing with matter/electromagnetic radiation interaction. In this study, we have prepared polymer composites, based on a silicone elastomer matrix and Tuball carbon nanotubes (CNT) via a simple preparation procedure. The as-prepared composites demonstrated record-high dielectric permittivity both in the low-frequency range (102−107 Hz) and in the X-band (8.

Nickel on Oxidatively Modified Carbon as a Promising Cost-Efficient Catalyst for Reduction of -Nitrophenol.

The reduction of -nitrophenol to -aminophenol has become a benchmark reaction for testing the efficiency of new catalytic systems. In this study, we use oxidatively modified carbon (OMC) as a structural support to develop a new cost-efficient nickel-based catalytic system. The newly developed material comprises single nickel ions, chemically bound to the oxygen functional groups on the OMC surface.

Antibody mounting capability of 1D/2D carbonaceous nanomaterials toward rapid-specific detection of SARS-CoV-2.

Carbonaceous immunosensors are ideal nanoplatforms for developing rapid, precise, and ultra-specific diagnostic kits capable of early detection of viral infectious illnesses such as COVID-19. However, developing a proper carbonic immunosensor requires stepwise protocols to find optimum operating conditions to minimize drawbacks. Herein, for the first time and through a stepwise protocol, activation, and monoclonal IgG antibody mounting capability of multi-walled carbon nanotubes (MWCNTs) at two diverse outer diameters (ODs), viz.

Carboxyl groups do not play the major role in binding metal cations by graphene oxide.

In this study, we investigate the chemical interactions of Mn ions with graphene oxides, prepared by Hummers' (HGO) and Brodie's (BGO) methods in aqueous solutions by means of NMR relaxation. Carboxyl groups, which are always present in HGO in significant quantities, are often considered as the main binding sites for metal ions. Here we demonstrate that metal ions are bound efficiently by BGO, containing a negligibly small quantity of carboxyl groups.

Counterion Concentration Profiles at the Graphene Oxide/Water Interface.

Despite enormous interest toward graphene oxide (GO) from the research community, surprisingly, little is known about its solutions. In particular, the questions related to the structure of the GO/liquid interface have not been yet properly addressed. In this report, we use a simple but efficient experimental approach to investigate the distribution of the four metal cations Na, Cs, Ni, and Gd at the GO/water interface.

Magneto-Optical Properties of the Magnetite-Graphene Oxide Composites in Organic Solvents.

Graphene oxide (GO) aqueous solutions are known to form liquid crystals that can switch in electric fields. Magnetic fields as external stimuli are inefficient toward GO because of its diamagnetic properties, and GO is known to be insoluble in most of the organic solvents. In this study, composites of GO with oleate-protected magnetite nanoparticles were prepared as stable colloid solutions in the mixed isopropanol-chloroform solvents.

γ-Iron Phase Stabilized at Room Temperature by Thermally Processed Graphene Oxide.

Stabilizing nanoparticles on surfaces, such as graphene, is a growing field of research. Thereby, iron particle stabilization on carbon materials is attractive and finds applications in charge-storage devices, catalysis, and others. In this work, we describe the discovery of iron nanoparticles with the face-centered cubic structure that was postulated not to exist at ambient conditions.

Distribution of Gd(III) ions at the graphene oxide/water interface.

Graphene oxide (GO) have emerged recently as a novel material for sorbing metal cations from aqueous media. However, the literature data on sorption capacity differ by more than one order in magnitude, and the nature of the chemical bonding between GO and metal cations remains unclear. In this work we show that Gd ions are bound to GO by both coordinate-covalent bonding and electrostatic attraction with prevailing the former.

Revisiting the Mechanism of Oxidative Unzipping of Multiwall Carbon Nanotubes to Graphene Nanoribbons.

Unzipping multiwall carbon nanotubes (MWCNTs) attracted great interest as a method for producing graphene nanoribbons (GNRs). However, depending on the production method, the GNRs have been proposed to form by different mechanisms. Here, we demonstrate that the oxidative unzipping of MWCNTs is intercalation-driven, not oxidative chemical-bond cleavage as was formerly proposed.

Analysis of competitive binding of several metal cations by graphene oxide reveals the quantity and spatial distribution of carboxyl groups on its surface.

The sorption capacity of graphene oxide (GO) toward different metal cations has been the subject of several recent studies. However, the reported quantitative data are controversial, and the mechanism of chemical bonding between GO and metal cations is poorly understood. Clarifying these questions can eventually help to reveal the fine chemical structure of GO that remains ambiguous.

New insights into the solubility of graphene oxide in water and alcohols.

One of the main advantages of graphene oxide (GO) over its non-oxidized counterpart is its ability to form stable solutions in water and some organic solvents. At the same time, the nature of GO solutions is not completely understood; the existing data are scarce and controversial. Here, we demonstrate that the solubility of GO, and the stability of the as-formed solutions depend not just on the solute and solvent cohesion parameters, as commonly believed, but mostly on the chemical interactions at the GO/solvent interface.

Homogeneous Liquid Phase Transfer of Graphene Oxide into Epoxy Resins.

The quality of polymer composite materials depends on the distribution of the filler in the polymer matrix. Due to the presence of the oxygen functional groups, graphene oxide (GO) has a strong affinity to epoxy resins, providing potential opportunity for the uniform distribution of GO sheets in the matrix. Another advantage of GO over its nonoxidized counterpart is its ability to exfoliate to single-atomic-layer sheets in water and in some organic solvents.

Chemical Mass Production of Graphene Nanoplatelets in ∼100% Yield.

Successful application of graphene is hampered by the lack of cost-effective methods for its production. Here, we demonstrate a method of mass production of graphene nanoplatelets (GNPs) by exfoliation of flake graphite in the tricomponent system made by a combination of ammonium persulfate ((NH4)2S2O8), concentrated sulfuric acid, and fuming sulfuric acid. The resulting GNPs are tens of microns in diameter and 10-35 nm in thickness.

Mechanism of graphene oxide formation.

Despite intensive research, the mechanism of graphene oxide (GO) formation remains unclear. The role of interfacial interactions between solid graphite and the liquid reaction medium, and transport of the oxidizing agent into the graphite, has not been well-addressed. In this work, we show that formation of GO from graphite constitutes three distinct independent steps.

Enhanced MRI relaxivity of aquated Gd3+ ions by carboxyphenylated water-dispersed graphene nanoribbons.

The present study demonstrates that highly water-dispersed graphene nanoribbons dispersed by carboxyphenylated substituents and conjugated to aquated Gd(3+) ions can serve as a high-performance contrast agent (CA) for applications in T1- and T2-weighted magnetic resonance imaging (MRI) with relaxivity (r1,2) values outperforming currently-available clinical CAs by up to 16 times for r1 and 21 times for r2.

Direct real-time monitoring of stage transitions in graphite intercalation compounds.

Graphite intercalation compounds (GIC) possess a broad range of unique properties that are not specific to the parent materials. While the stage transition, changing the number of graphene layers sandwiched between the two layers of intercalant, is fundamentally important and has been theoretically addressed, experimental studies revealed only macroscopic parameters. On the microscale, the phenomenon remains elusive up to the present day.

Stable aqueous colloidal solutions of intact surfactant-free graphene nanoribbons and related graphitic nanostructures.

Here we demonstrate a simple, nondestructive method for the preparation of stable aqueous colloidal solutions of graphene nanoribbons and carbon nanotubes. The method includes sonication of carbon nanomaterials in hypophosphorous acid, filtration accompanied by washing the solids with water and dispersion of the solids in a fresh portion of water to form colloidal solutions.

Graphene oxide. Origin of acidity, its instability in water, and a new dynamic structural model.

The existing structural models of graphene oxide (GO) contradict each other and cannot adequately explain the acidity of its aqueous solutions. Inadequate understanding of chemical structure can lead to a misinterpretation of observed experimental phenomena. Understanding the chemistry and structure of GO should enable new functionalization protocols while explaining GO's limitations due to its water instability.

Reversible formation of ammonium persulfate/sulfuric acid graphite intercalation compounds and their peculiar Raman spectra.

Graphite intercalation compounds (GICs) can be considered stacks of individual doped graphene layers. Here we demonstrate a reversible formation of sulfuric acid-based GICs using ammonium persulfate as the chemical oxidizing agent. No covalent chemical oxidation leading to the formation of graphite oxide occurs, which inevitably happens when other compounds such as potassium permanganate are used to charge carbon layers.

In situ intercalation replacement and selective functionalization of graphene nanoribbon stacks.

A cost-effective and potentially industrially scalable, in situ functionalization procedure for preparation of soluble graphene nanoribbon (GNRs) from commercially available carbon nanotubes is presented. The physical characteristics of the functionalized product were determined using SEM, evolved gas analysis, X-ray diffraction, solid-state (13)C NMR, Raman spectroscopy, and GC-MS analytical techniques. A relatively high preservation of electrical properties in the bulk material was observed.