Computational challenges and solutions: Prime number generation for enhanced data security.

This paper addresses the computational methods and challenges associated with prime number generation, a critical component in encryption algorithms for ensuring data security. The generation of prime numbers efficiently is a critical challenge in various domains, including cryptography, number theory, and computer science. The quest to find more effective algorithms for prime number generation is driven by the increasing demand for secure communication and data storage and the need for efficient algorithms to solve complex mathematical problems.

Synthesis of spinel Nickel Ferrite (NiFeO)/CNT electrocatalyst for ethylene glycol oxidation in alkaline medium.

Nickel-iron-based spinel oxide was prepared and supported on multi-walled carbon nanotubes to enhance the electrochemical oxidation of ethylene glycol in an alkaline medium. NiFeO was prepared using facile sol-gel techniques. Then the prepared material was characterized using different bulk and surface techniques like powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and transmitted electron microscope (TEM).

Effect of Adsorption and Interactions of New Triazole-Thione-Schiff Bases on the Corrosion Rate of Carbon Steel in 1 M HCl Solution: Theoretical and Experimental Evaluation.

Due to the unique properties of steel, including its hardness, durability, and superconductivity, which make it an essential material in many industries, it lacks corrosion resistance. Herewith, two novel triazole-thione Schiff bases, namely, ()-5-methyl-4-((thiophen-2-ylmethylene)amino)-2,4-dihydro-3-1,2,4-triazole-3-thione (TMAT) and ()-4-(((5-(dimethylamino)thiophen-2-yl)methylene)amino)-5-methyl-2,4-dihydro-3-1,2,4-triazole-3-thione (DMTMAT), were synthesized and characterized. The corrosion inhibition (CI) ability of these two molecules on carbon steel in an aqueous solution of 1 M HCl as well as their interaction with its surface was studied using a number of different techniques.

Breast Ultrasound Images Augmentation and Segmentation Using GAN with Identity Block and Modified U-Net 3.

One of the most prevalent diseases affecting women in recent years is breast cancer. Early breast cancer detection can help in the treatment, lower the infection risk, and worsen the results. This paper presents a hybrid approach for augmentation and segmenting breast cancer.

Photodetection Properties of CdS/Si Heterojunction Prepared by Pulsed Laser Ablation in DMSO Solution for Optoelectronic Application.

The high-quality n-type CdS on a p-type Si (111) photodetector device was prepared for the first time by a one-pot method based on an ns laser ablation method in a liquid medium. Cadmium target was ablated in DMSO solution, containing sulfur precursor, and stirred, assisting in 1D-growth, to create the sulfide structure as CdS nano-ropes form, followed by depositing on the Si-substrate by spin coating. The morphological, structural, and optical characteristics of the CdS structure were examined using X-ray diffraction, transmission, and scanning electron microscopy, photoluminescence, and UV-VIS spectroscopy.

Comparative Study between First and Second Harmonics of a Nd:YAG Laser for Cleaning Manifestation Damages That Appeared in Pigments Used on Archaeological Cartonnage.

This study focused on identifying the effect of the laser wavelengths used in cleaning some manifestation damage appearing in pigments used on archaeological cartonnage preserved in the Egyptian Museum, Egypt. The manifestations of damage appear as mud, resin, color, dust and microbiological damage stains. Lasers were chosen as one of the modern applications that give good results when cleaning the pigment materials without making direct contact with the material.

Effect of CuO Nanoparticles on the Optical, Structural, and Electrical Properties in the PMMA/PVDF Nanocomposite.

A polymeric nanocomposite film, composed of PMMA/PVDF and different amounts of CuO NPs, was successfully prepared using the casting method to enhance its electrical conductivity. Various techniques were employed to investigate their physicochemical properties. The addition of CuO NPs causes a noticeable difference in the intensities and locations of vibrational peaks in all bands, confirming the incorporation of CuO NPs inside the PVDF/PMMA.

Photocatalytic Performance Improvement by Doping Ag on ZnO/MWCNTs Nanocomposite Prepared with Pulsed Laser Ablation Method Based Photocatalysts Degrading Rhodamine B Organic Pollutant Dye.

ZnO/MWCNTs nanocomposite has significant potential in photocatalytic and environmental treatment. Unfortunately, its photocatalytic efficacy is not high enough due to its poor light absorbance and quick recombination of photo-generated carriers, which might be improved by incorporation with noble metal nanoparticles. Herein, Ag-doped ZnO/MWCNTs nanocomposite was prepared using a pulsed laser ablation approach in the liquid media and examined as a degradable catalyst for Rhodamine B.

Ag/ZnO Thin Film Nanocomposite Membrane Prepared by Laser-Assisted Method for Catalytic Degradation of 4-Nitrophenol.

Zinc oxide thin film (ZnO thin film) and a silver-doped zinc oxide nanocomposite thin film (Ag/ZnO thin film) were prepared by the technique of the pulsed laser deposition at 600 °C to be applicable as a portable catalytic material for the removal of 4-nitrophenol. The nanocomposite was prepared by making the deposition of the two targets (Zn and Ag), and it was analyzed by different techniques. According to the XRD pattern, the hexagonal wurtzite crystalline form of Ag-doped ZnO NPs suggested that the samples were polycrystalline.

Removal of Ni(II) Ions by Poly(Vinyl Alcohol)/AlO Nanocomposite Film via Laser Ablation in Liquid.

AlO-poly(vinyl alcohol) nanocomposite (AlO-PVA nanocomposite) was generated in a single step using an -friendly method based on the pulsed laser ablation approach immersed in PVA solution to be applicable for the removal of Ni(II) from aqueous solution, followed by making a physicochemical characterization by SEM, XRD, FT-IR, and EDX. After that, the effect of adsorption parameters, such as pH, contact time, initial concentration of Ni(II), and medium temperature, were investigated for removal Ni(II) ions. The results showed that the adsorption was increased when pH was 5.

Multifunctional leather surface embedded with zinc oxide nanoparticles by pulsed laser ablation method.

A simple procedure was used to generate and decorate leather structures with different amounts from zinc oxide (ZnO) nanoparticles to produce multifunctional leather structure by pulsed laser ablation method in liquid media based on changing the ablation time in just one-pot method. The impact of varying concentrations of ZnO nanoparticles embedded on the surface of leather on water resistance, water vapor permeability, mechanical characteristics, and UV-shielding efficiency was examined by different characterization techniques like X-ray diffraction, surface area, UV-visible spectroscopy, scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. The results showed that the combination between the external functional groups of leather with ZnO nanoparticles was discovered.

Synthesis of Ag Nanoparticles-Decorated CNTs via Laser Ablation Method for the Enhancement the Photocatalytic Removal of Naphthalene from Water.

Silver nanoparticles (Ag NPs) were decorated with different amounts on the exterior walls of carbon nanotubes (CNTs) by a laser ablation assisted method, especially in liquid media to be applied as a good adsorption material against naphthalene. The laser ablation time was controlled the amount of decoration Ag NPs on CNTs. The prepared nanocomposite was analyzed via different analytical techniques.

Optical and Thermal Investigations of New Schiff Base/Ester Systems in Pure and Mixed States.

New mesomorphic series, 4-hexadecyloxy phenyl-imino-4'-(3-methoxyphenyl)-4″-alkoxybenzoates (), were prepared and investigated with different thermal and mesomorphic techniques. The synthesized homologous series constitutes four members that differ from each other in the terminal length of flexible chain () attached to phenyl ester moiety, which varies between = 6, 8, 10, and 12 carbons. A lateral CHO group is attached to the central benzene ring in the meta position with respect to the ester moiety.

A Gut Analysis Technique for Pinpointing Egg-Specific Predation Events.

A universal food immunomarking technique (UFIT) is described for postmortem gut analysis detection of predation on the egg stage of Lygus hesperus Knight (Hemiptera: Miridae). Collops vittatus Say (Coleoptera: Melyridae) and Hippodamia convergens Guérin-Méneville (Coleoptera: Coccinellidae) were fed a single L. hesperus egg that was marked with rabbit and chicken sera proteins.

Insecticide susceptibility of three species of cutworm (Lepidoptera: Noctuidae) pests of grapes.

Climbing cutworms in the genus Abagrotis are economically important pests of grapes in the Okanagan Valley of British Columbia (BC). Grapes are recently introduced into many areas of the region, and the association between crop and pest is new and still evolving. This has led to limited information being available on pest management strategies, including the evaluation of chemical controls compatible with local production practices.