Success of zygomatic plate-screw anchorage system.

Purpose: To evaluate the success of zygomatic plate-screw anchorage and to define the key points that help to improve the success of this system.

Materials And Methods: A total of 74 zygomatic plate-screw anchors were applied to 37 patients from 2 groups receiving orthodontic treatment. The first group consisted of 19 patients, and the zygoma anchors were applied bilaterally to distalize the maxillary buccal segment.

Urofacial (ochoa) syndrome: can a facial gestalt represent severe voiding dysfunction?

Urofacial (Ochoa) syndrome is a rare autosomal-recessive disorder that features an unusual "inverted" facial expression, such that patients appear to be crying when they smile. This syndrome also involves serious urinary tract disorders, though the diagnosis may be missed because of variability of these problems and failure to recognize the characteristic facial grimacing. The urinary issues usually result in enuresis, urinary tract infection, and hydronephrosis, and some severely affected patients become hypertensive and progress to end-stage renal disease.

A comparison of white spot lesion formation between a self-ligating bracket and a conventional preadjusted straight wire bracket.

Aim: Demineralization following removal of orthodontic appliances is a common problem. Presence of archwires, especially those with loops and different types of ligatures, complicate cleaning around bands and brackets during orthodontic treatment. These factors led clinicians to develop self-ligating brackets.

Comparison of the zygoma anchorage system with cervical headgear in buccal segment distalization.

This prospective study aimed to evaluate the effects of the zygoma anchorage system (ZAS) in buccal segment distalization in comparison with cervical headgear (CH). Thirty patients with Class II dental malocclusions were included in the study and were divided into two equal groups: the first group (10 females and 5 males, mean age 14.74 years at T1) received buccal segment distalization with ZAS and the second group (8 females and 7 males, mean age 15.

Effect of LED curing on marginal integrity of an ormocer-based sealant.

Purpose: The purpose of this study was to investigate the microleakage of a light cured, ormocer-based fissure sealant when photopolymerized with 2 different light emitting diode (LED) curing units and a conventional quartz-tungsten halogen (QTH) light-curing unit.

Methods: Thirty freshly extracted, unerupted human third molars from 9 adolescent were randomly assigned into 3 groups (N=10/group). Pits and fissures were acid etched for 30 seconds, rinsed for 15 seconds with an air-water spray, and air-dried.

Fiber-reinforced technology in multidisciplinary chairside approaches.

There is an increasing demand to improve dentofacial esthetics in the adult population. This demand usually requires a close collaboration within the various disciplines of dentistry and the patient at every stage of the therapy. The materials and techniques used by these interdisciplinary clinicians must be conservative and minimally invasive.

Stability of zygomatic plate-screw orthodontic anchorage system: a finite element analysis.

Objective: To evaluate the biomechanical properties of a standard and a newly designed plate-screw orthodontic anchorage system.

Materials And Methods: A three-dimensional model of the posterior maxilla, including the zygomatic buttress region, was prepared. Insertion of standard and newly designed plates was simulated on the three-dimensional model.

Orthodontic and surgical treatment of hemimandibular hyperplasia.

Correction of facial asymmetries is still a major problem in need of an adequate solution. In this case report, the differential diagnosis and treatment strategies of hemimandibular hyperplasia are described with the present patient.

Forced eruption and implant treatment in posterior maxilla: a clinical report.

Periodontal disease can result in bone defects that surround periodontally compromised teeth. After the loss of those teeth, remaining defects may compromise successful treatment with dental implants. Forced eruption, induced by applying light orthodontic forces in the coronal direction, provides enhancement of the implant recipient site by enabling the extraction of the periodontally hopeless teeth.

Unexpected breakage of mandibular midline distraction device: case report.

Management of the transverse mandibular deficiency and anterior crowding by mandibular midline distraction osteogenesis (MMDO) is an efficient and stable alternative to orthodontic mechanics with minor complications. Although the only major complication reported previously during MMDO is the nonunion of the segments, in the present case report an unexpected breakage of the distractor in MMDO during the consolidation period as a new major complication was presented.

Microleakage beneath ceramic and metal brackets photopolymerized with LED or conventional light curing units.

Objective: To test the null hypotheses that (1) the type of light curing unit used (quartz-tungsten-halogen [QTH] or light-emitting diode [LED]) would not affect the amount of microleakage observed beneath brackets, and (2) the bracket type used (ceramic or metal) would not influence the amount of microleakage observed beneath brackets.

Materials And Methods: 40 freshly-extracted human premolars were randomly assigned into 4 bonding groups (n = 10/group): group 1, metal bracket + LED-cured Transbond XT; group 2, ceramic bracket + LED-cured Transbond XT; group 3, metal bracket + QTH-cured Transbond XT; and group 4, ceramic bracket + QTH-cured Transbond XT. The teeth were kept in distilled water for 1 month, and thereafter subjected to 500 thermal cycles.

Microleakage beneath ceramic and metal brackets bonded with a conventional and an antibacterial adhesive system.

Objective: To assess microleakage of a tooth-adhesive-bracket complex when metal or ceramic brackets were bonded with a conventional and an antibacterial self-etching adhesive.

Materials And Methods: Forty freshly extracted human premolars were randomly assigned to four equal groups and received the following treatments: group 1 = Transbond XT + metal bracket, group 2 = Transbond XT + ceramic bracket, group 3 = Clearfil Protect Bond + ceramic bracket, and group 4 = Clearfil Protect Bond + metal bracket. After photopolymerization, the teeth were kept in distilled water for 1 month and thereafter subjected to thermal cycling (500 cycles).

Vector alignment in maxillary distraction osteogenesis.

Maxillary distraction osteogenesis is an alternative treatment of cleft patients with severe maxillary hypoplasia. The aim of this paper is to present the combined surgical/orthodontic treatment of a cleft lip and palate patient and to evaluate the maxillary distraction procedure and the distraction vector in high Le Fort I osteotomy.

Qualitative and quantitative evaluation of enamel after various stripping methods.

Introduction: In this study, we investigated ultramorphology, surface roughness, and microhardness of permanent and deciduous tooth enamel after various stripping methods.

Methods: One hundred twenty deciduous and permanent teeth (n = 60 each) were used. Qualitative (scanning electron microscopy) and quantitative (surface roughness and microhardness tests) experiments were carried out in the following experimental groups: group 1, stripping disk; group 2, diamond-coated metal strip; group 3, stripping disk and Sof-Lex discs (3M-ESPE, Seefeld, Germany); group 4, diamond-coated metal strip and Sof-Lex discs; group 5 (chemical stripping), 37% orthophosphoric acid in conjunction with diamond-coated metal strip; group 6 (control), no stripping.

Evaluation of maxillary protraction and fixed appliance therapy in Class III patients.

The aim of this study was to examine the dentofacial changes in Class III patients treated with fixed appliances subsequent to rapid maxillary expansion (RME) and facemask therapy. The material consisted of the cephalograms and hand-wrist films of 14 (9 girls, 5 boys) skeletal Class III and 15 (10 girls, 5 boys) untreated subjects obtained at the beginning of treatment/observation T1, immediately after orthopaedic therapy T2, and at the end of the observation period T3. The mean pre-treatment/control ages were approximately 11.

Mandibular midline distraction using a simple device.

Objective: Mandibular midline distraction osteogenesis represents a new option for creation of intra-arch space in the mandibular arch. The aim of this paper is to introduce a simple device (hyrax expander) and method for mandibular midline distraction.

Study Design: The sample consisted of 24 patients (mean age: 18.

Shear bond strength of orthodontic brackets with 3 self-etch adhesives.

Introduction: The purpose of this study was to compare shear bond strength and mode of failure of brackets bonded with 3 self-etching products.

Methods: The products tested were (1) a recently developed, modified self-etching, 1-step adhesive system (Adper Prompt L-Pop Self Etch Adhesive, 3M, St Paul, Minn); (2) a new fluoride-releasing, antibacterial, self-etching adhesive system (Clearfil Protect Bond, Kuraray, Osaka, Japan); and (3) a fluoride-releasing, self-etching adhesive system (Transbond Plus Self Etching Primer, 3M). Thirty-six defect-free premolars were randomly divided into 3 groups (n = 12 each), and metal brackets were bonded according to the manufacturer's instructions.

Effect of resin-removal methods on enamel and shear bond strength of rebonded brackets.

The objective of this study is to determine (1) the effect of different resin-removal methods on shear bond strength (SBS) of rebonded brackets, (2) condition of the enamel surface, (3) time spent to remove resin remnants, and (4) the location of the bond failure. A total of 80 premolars were included in the study. Fifty of them were divided into five groups and bonded using Light Bondtrade mark sealant and Quick Curetrade mark adhesive.

Mandibular midline distraction using a simple device.

Objective: Mandibular midline distraction osteogenesis represents a new option for creation of intra-arch space in the mandibular arch. The aim of this paper is to introduce a simple device (hyrax expander) and method for mandibular midline distraction.

Study Design: The sample consisted of 24 patients (mean age: 18.

Differential diagnosis of skeletal open bite based on sagittal components of the face.

Aims: This study examined the morphology of skeletal open bite with respect to the sagittal components of the face.

Methods: The material consisted of cephalometric and hand-wrist films of 49 girls and 22 boys with skeletal open bite. The samples were grouped into Class I, II, and III facial types on the basis of ANB angle.

Profile changes associated with different orthopedic treatment approaches in Class III malocclusions.

The aim of this study was to evaluate and compare the soft tissue effects of chincup (CC), chincup plus bite plate (CC+P), and reverse headgear (RHg) therapies with each other and with an untreated control group (C). The material consisted of lateral cephalometric and hand-wrist films of 59 Class III cases and 20 nontreated control subjects. Thirty-one cases were treated with CC, 14 with CC+P, and 14 with RHg, and Class I relation was achieved.

A cephalometric evaluation of lower lip in patients with unilateral cleft lip and palate.

Objective: The aim of this study was to evaluate cephalometrically the lower lip position and area of patients with unilateral cleft lip and palate (UCLP) comparatively with Class I skeletodental normal subjects.

Patients: Lateral cephalometric and hand-wrist radiographs obtained from 24 patients with UCLP (mean age 12.86 years), along with 20 normal individuals (mean age 12.