[Evaluation of Low-contrast Detectability Using the Digital Phantom Creation Tool in the Late Arterial Phase to Detect Liver Mass Lesions].

Purpose: Late arterial phase images of SD 8, SD 10, and SD 12 were acquired in the 3-phase dynamic study of the liver in combination with hybrid iterative reconstruction. We evaluated the low-contrast detectability by adding a simulated tumor to these images and aimed to formulate a standard image quality.

Methods: We prepared images with and without signal for 60 series of 20 samples, each with 3 image quality types (total: 120 series).

Nature of the liver volume depending on the gender and age assessing volumetry from a reconstruction of the computed tomography.

Although the liver is a regenerating organ, excessive loss of liver volume (LV) can cause fatal liver failure. It is unclear whether LV is correlated with age; however, it is known that liver function decreases with age. In addition, the gender-related role of LV remains unclear.

Contribution of Neuropilin-1 in Radiation-Survived Subclones of NSCLC Cell Line H1299.

Non-small cell lung cancer (NSCLC) is an aggressive lung cancer accounting for approximately 85% of all lung cancer patients. For the patients with Stages IIIA, IIIB, and IIIC, the 5-year survival is low though with the combination with radiotherapy and chemotherapy. In addition, the occurrence of tumor cells (repopulated tumors) that survive irradiation remains a challenge.

Degree of conversion and dentin bond strength of light-cured multi-mode adhesives pretreated or mixed with sulfinate agents.

The influence of sulfinate agents applied as a dentin pretreatment or a mixture with multi-mode one-step self-etch adhesives (1-SEAs) on the degree of conversion (DC) and micro-tensile bond strength (μTBS) of light-cured 1-SEAs was investigated. 1-SEAs Clearfil Universal Bond Quick (UBQ) or Scotchbond Universal Adhesive (SBU) were applied to dentin in etch&rinse or self-etch mode using various application strategies: 1) no pretreatment, 2) pretreatment with 90 wt% ethanol, 3) pretreatment with a sulfinate agent Clearfil DC Activator (UDC) or Scotchbond Universal DCA (SDC), or 4) a mixture of UBQ+UDC or SBU+SDC. μTBS was measured after 24 h.

Influence of central and peripheral dentin on micro-tensile bond strength estimated using a competing risk model.

The bonding performance of dental adhesives is most frequently evaluated using the micro-tensile bond strength (μTBS) test. Despite lacking evidence, peripheral specimens are often discarded to avoid regional variability. This study, therefore, examined whether μTBS to central and peripheral dentin differed.

Efficacy of non-rigid registration technique for misregistration in 3D-CTA fusion imaging.

Purpose: To assess whether fusion 3D-CTA images can be corrected using non-rigid registration (NRR) for gastroenterology imaging.

Methods: This study included 55 patients before gastroenterology surgery who underwent preoperative 3D-CTA prior to gastroenterological surgery. We recorded the coordinate of measurement points on the arterial vessels (X, Y, and Z) in each portal phase, original image of the arterial phase, and arterial phase with NRR.

Evaluation of computed tomography arterial portography scan timing using different bolus tracking methods.

Computed tomography arterial portography (CTAP) is widely used with a fixed scan timing and contrast medium quantity; however, these parameters are not necessarily optimal. In this study, CTAP scan timing was analyzed by different bolus tracking methods to monitor the inflow of the contrast medium in real-time. A total of 249 patients who underwent CTAP were assessed.

The combined effect of light-illuminating direction and enamel rod orientation on color adjustment at the enamel borders of composite restorations.

Objectives: To investigate the effect of light-illuminating direction (from composite or enamel side) on color adjustment at the coronal and cervical enamel borders in composite restorations.

Materials And Methods: Forty cylindrical holes (3.0-mm diameters) were prepared in bovine enamel disks (1.

[Development of New Digital Phantom Creation Tool for Evaluation of Low-contrast Detectability Using Iterative Reconstruction].

Purpose: We developed a novel digital phantom-creation tool that will help formulate the standard shooting method for a three-phase dynamic liver study. Here, we present data demonstrating the usefulness of this tool in the assessment of low-contrast detectability and visibility.

Methods: We performed a visual evaluation by adding a spherical digital phantom with a diameter of 8 mm and a computed tomography (CT) value difference of 10 Hounsfield unit (HU) to images taken using filtered back projection and seven types of adaptive iterative dose reduction 3D (Weak, Mild, eMild, Standard, eStandard, Strong, and eStrong).

The strategies used for curing universal adhesives affect the micro-bond strength of resin cement used to lute indirect resin composites to human dentin.

We evaluated the effect of different curing strategies for universal adhesives on micro-tensile bond strength (μTBS) between resin cement and dentin and/or between resin cement and indirect resin composite. Flat coronal dentin surfaces and composite resin disks were pretreated with silane-containing universal adhesives, with or without light-curing on the dentin-side and/or composite resin disk-side. Resin disks were luted onto the pretreated dentin surfaces with the corresponding dual-cure adhesive resin cements and light-cured, and cut into beams after 24-h water storage.

Stress distribution in tooth resin core build-ups with different post-end positions in alveolar bone level under two kinds of load directions.

This study aimed to evaluate influence of different post-end positions in alveolar bone level on stress distributions in resin-core build-up tooth under different load directions. Three-dimensional mathematical models of a root-filled mandibular premolar tooth were constructed. Resin post and core were built-up with six post lengths: 0, 1, 2, 3, 4, and 6 mm.

Estrogen alters gonadal soma-derived factor (Gsdf)/Foxl2 expression levels in the testes associated with testis-ova differentiation in adult medaka, Oryzias latipes.

Testis-ova differentiation in sexually mature male medaka (Oryzias latipes) is easily induced by estrogenic chemicals, indicating that spermatogonia persist in sexual bipotentiality, even in mature testes in medaka. By contrast, the effects of estrogen on testicular somatic cells associated with testis-ova differentiation in medaka remain unclear. In this study, we focused on the dynamics of sex-related genes (Gsdf, Dmrt1, and Foxl2) expressed in Sertoli cells in the mature testes of adult medaka during estrogen-induced testis-ova differentiation.

The influence of elastic moduli of core materials on shear stress distributions at the adhesive interface in resin built-up teeth.

This study aimed to investigate shear stress distributions in resin built-up teeth using resin composites of varying elastic moduli (E), with or without fiber posts. Three-dimensional mathematical models of a root-filled mandibular premolar tooth were constructed. Resin post and cores were built-up with resin composites of three different E: 12,000, 18,000 and 24,000 MPa, with or without fiber posts.

[Optimization of the Timing of the Portal Venous Phase in Preoperative 3DCT for Malignant Liver Tumors].

Preoperative three-dimensional computed tomography (3DCT) of the liver is the most important examination in performing preoperative simulation. Detailed visualization of the portal vein using the workstation is critical to enable accurate liver segmentation. However, the timing of imaging in the portal venous phase has mostly been reported equivalent to that of the liver screening examinations commonly performed.

Cross-linked dry bonding: A new etch-and-rinse technique.

Objective: To determine if acid-etched, cross-linked dentin can be dehydrated without lowering bond strength below that of cross-linked wet-bonded dentin in vitro.

Methods: Using extracted human third molars, control acid-etched dentin was bonded with Single Bond Plus, using either the wet- or dry-bonding technique. Experimental acid-etched dentin was treated with 5mass% grape seed extract (GSE) in different solvents for 1min before undergoing wet vs dry resin-dentin bonding with Single Bond Plus.

Effects of a Dicalcium and Tetracalcium Phosphate-Based Desensitizer on In Vitro Dentin Permeability.

The present study evaluated the effectiveness of a dicalcium and tetracalcium phosphate-based desensitizer in reducing dentin permeability in vitro. Dentin fluid flow was measured before and after treatment of dentin with patent dentinal tubules using 1 or 3 applications of the dicalcium and tetracalcium phosphate containing agent TeethmateTM (TM) and comparing the results with two sodium fluoride varnishes VellaTM (VLA) and VanishTM (VAN), after storage in artificial saliva for 24 h, 48 h and 7 days. Significant differences were observed among the 4 methods employed for reducing dentin permeability (p < 0.

Adhesive sealing of dentin surfaces in vitro: A review.

Purpose: This review describes the evolution of the use of dental adhesives to form a tight seal of freshly prepared dentin to protect the pulp from bacterial products, during the time between crown preparation and final cementation of full crowns. The evolution of these "immediate dentin sealants" follows the evolution of dental adhesives, in general. That is, they began with multiple-step, etch-and-rinse adhesives, and then switched to the use of simplified adhesives.

Is chlorhexidine-methacrylate as effective as chlorhexidine digluconate in preserving resin dentin interfaces?

Objectives: The aim of the current study was to evaluate the effect of 2% CHX and 2% CHX-methacrylate compared to the resin-dentin bonds created by a two-step etch-and-rinse adhesive system after 24h, 6min and 12min.

Methods: Microtensile bond strengths and interfacial nanoleakage within resin-dentin interfaces created by Adper Single Bond 2, with or without CHX or CHX-methacrylate pre-treatment for 30s on acid-etched dentin surfaces, were evaluated after 24h, 6min and 12min of storage in distilled water at 37°C.

Results: Twelve months of storage resulted in a significant decrease in microtensile bond strength in the control group, and significant increases in silver nanoleakage.

Application of ethanol improves the resin-dentin bond strength of a two-bottle, self-etching primer-adhesive.

Purpose: To investigate whether the application of ethanol to a two-step self-etching adhesive can improve its resin-dentin bond performance.

Methods: Four different ethanol concentrations were added to the adhesive of Clearfil SE Bond to create four ethanol primers (40, 60, 80 or 100% ethanol). 24 extracted third molars were divided into four groups.

Beta-cyanoalanine synthase as a molecular marker for induced resistance by fungal glycoprotein elicitor and commercial plant activators.

ABSTRACT The biocontrol agent Pythium oligandrum produces glycoprotein elicitor in the cell wall fraction, designated CWP, and induces resistance to a broad range of pathogens. To understand the mechanism of CWP-induced resistance to pathogens, gene expression at the early stage of CWP treatment in tomato roots was analyzed using a cDNA array. At 4 h after CWP treatment, 144 genes were up-regulated and 99 genes were down-regulated.