Extracting oil from used auto tires at low temperature after chemical treatment.

This study presents an alternative tactic to pyrolysis of auto tires avoiding the use of high temperature and increasing the yield of oil produced. It depends on a simple chemical treatment of auto tires with sodium carbonate at low temperature (50°C) followed by solvent extraction. This treatment produced two folds of the yield that can be obtained using normal solvent extraction.

Pyrolysis of poly(vinyl chloride) and-electric arc furnacedust mixtures.

An investigation into the pyrolysis kinetics of PVC mixed with electric arc furnace dust (EAFD) was performed. Mixtures of both materials with varying PVC ratios (1:1, 1:2, 1:3) were prepared and pyrolyzed in a nitrogen atmosphere under dynamic heating conditions at different heating rates (5, 10, 30 and 50 °C/min). The pyrolysis process proceeded through two main decomposition steps; the first step involved the release of HCl which reacted with the metal oxides present in the dust, subsequently forming metal chlorides and water vapor.

Experimental determination of the TG-43 dosimetric characteristics of EchoSeed model 6733 I25I brachytherapy source.

Recently an improved design of a 125I brachytherapy source has been introduced for interstitial seed implants, particularly for prostate seed implants. This design improves the in situ ultrasound visualization of the source compared to the conventional seed. In this project, the TG-43 recommended dosimetric characteristics of the new brachytherapy source have been experimentally determined in Solid Water phantom material.

Determination of the dosimetric characteristics of InterSource125 iodine brachytherapy source.

The TG-43 recommended dosimetric characteristics of a new 125I brachytherapy source have been experimentally and theoretically determined. The measurements were performed in Solid Water using LiF TLDs. The calculations were performed using Monte Carlo simulations in Solid Water and water.