Converting food waste into soil amendments for improving soil sustainability and crop productivity: A review.

One-third of the annual food produced globally is wasted and much of the food waste (FW) is unutilized; however, FW can be valorized into value-added industrial products such as biofuel, chemicals, and biomaterials. Converting FW into soil amendments such as compost, vermicompost, anaerobic digestate, biofertilizer, biochar, and engineered biochar is one of the best nutrient recovery and FW reuse approaches. The soil application of FW-based amendments can improve soil fertility, increase crop production, and reduce contaminants by altering soil's chemical, physical, microbial, and faunal properties.

Designer biochar with enhanced functionality for efficient removal of radioactive cesium and strontium from water.

Radioactive elements released into the environment by accidental discharge constitute serious health hazards to humans and other organisms. In this study, three gasified biochars prepared from feedstock mixtures of wood, chicken manure, and food waste, and a KOH-activated biochar (40% food waste + 60% wood biochar (WFWK)) were used to remove cesium (Cs) and strontium (Sr) ions from water. The physicochemical properties of the biochars before and after adsorbing Cs and Sr were determined using X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, extended X-Ray absorption fine structure (EXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX).

Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution.

To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages.

Biochar alters chemical and microbial properties of microplastic-contaminated soil.

The occurrence of microplastics (MPs) in soils can negatively affect soil biodiversity and function. Soil amendments applied to MP-contaminated soil can alter the overall soil properties and enhance its functions and processes. However, little is known about how soil amendments improve the quality of MP-contaminated soils.

Fe(III) loaded chitosan-biochar composite fibers for the removal of phosphate from water.

Excess phosphorous (P) in aquatic systems causes adverse environmental impacts including eutrophication. This study fabricated Fe(III) loaded chitosan-biochar composite fibers (FBC-N and FBC-C) from paper mill sludge biochar produced under N (BC-N) and CO (BC-C) conditions at 600 °C for adsorptive removal of phosphate from water. Investigations using SEM/EDX, XPS, Raman spectroscopy, and specific surface area measurement revealed the morphological and physico-chemical characteristics of the adsorbent.

Effects of field scale in situ biochar incorporation on soil environment in a tropical highly weathered soil.

Biochar has been proven as a soil amendment to improve soil environment. However, mechanistic understanding of biochar on soil physical properties and microbial community remains unclear. In this study, a wood biochar (WB), was incorporated into a highly weathered tropical soil, and after 1 year the in situ changes in soil properties and microbial community were evaluated.

Effects of aging and weathering on immobilization of trace metals/metalloids in soils amended with biochar.

Biochar is an effective amendment for trace metal/metalloid (TMs) immobilization in soils. The capacity of biochar to immobilize TMs in soil can be positively or negatively altered due to the changes in the surface and structural chemistry of biochar after soil application. Biochar surfaces are oxidized in soils and induce structural changes through physical and biochemical weathering processes.

Carbon dioxide capture in biochar produced from pine sawdust and paper mill sludge: Effect of porous structure and surface chemistry.

The CO concentration in the atmosphere is increasing and threatening the earth's climate. Selective CO capture at large point sources will help to reduce the CO emissions to the atmosphere. Biochar with microporous structure could be a potential material to capture CO.

Gasification biochar from biowaste (food waste and wood waste) for effective CO adsorption.

Biochar is newly proposed as an innovative and cost-effective material to capture CO. In this study, biochar was produced from feedstock mixtures of food waste and wood waste (i.e.

Sustainable removal of Hg(II) by sulfur-modified pine-needle biochar.

Sulfur-modified pine-needle biochar (BC-S) was produced for the removal of Hg(II) in aqueous media via post-pyrolysis S stream exposure. Fourier-transform infrared spectroscopy, elemental analysis, and X-ray photoelectron spectroscopy confirmed the addition of S(0) groups on the surface of BC-S. Hg(II) adsorption on BC-S was best described by the Freundlich isotherm with a K of 21.

Biochar-induced metal immobilization and soil biogeochemical process: An integrated mechanistic approach.

The nature of biochar-derived dissolved organic matter (DOM) has a crucial role in the interactions between biochar and metal immobilization, carbon dynamics, and microbial communities in soil. This study utilized excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC) modeling to provide mechanistic evidence of biochar-induced influences on main soil biogeochemical processes. Three biochars produced from rice straw, wood, and grass residues were added to sandy and sandy loam soils and incubated for 473 d.

Distribution characteristics of Cd in different types of leaves of Festuca arundinacea intercropped with Cicer arietinum L.: A new strategy to remove pollutants by harvesting senescent and dead leaves.

Although cost-effective, phytoremediation is too expensive when considering the large-scale pollution. Relative to harvesting the whole plant, it is more practicable to remove and dispose of senescent and dead leaves after phytoremediation. The phytoremediation efficiency of Festuca arundinacea for Cd was evaluated in this study, because over about 7% of the land area in China was contaminated with Cd.

Effects of elevated CO on the phytoremediation efficiency of Noccaea caerulescens.

Concentrations of atmospheric carbon dioxide have been continuously increasing, and more investigations are needed in regard to the responses of various plants to the corresponding climatic conditions. In particular, potential variations in phytoremediation efficiency induced by global warming have rarely been investigated. Objective of this research was to evaluate the changes in phytoremediation efficiency of Noccaea caerulescens exposed to different concentrations of CO.

Recent advances in mitigating membrane biofouling using carbon-based materials.

Biofouling is the Achilles Heel of membrane processes. The accumulation of organic foulants and growth of microorganisms on the membrane surface reduce the permeability, shorten the membrane life, and increase the energy consumption. Advancements in novel carbon-based materials (CBMs) present significant opportunities in mitigating biofouling of membrane processes.

Heavy metal dissolution mechanisms from electrical industrial sludge.

In this paper, we investigate the release of heavy metals from sludge produced from an electrical industry using both organic and inorganic acids. Single and sequential extractions were conducted to assess heavy metals in different phases of the sludge. Metal release from sludge was investigated in the presence of three inorganic acids (nitric, sulfuric, and phosphoric) and three organic acids (acetic, malic, and citric) at concentrations ranging from 0.

Biochar-supported nZVI (nZVI/BC) for contaminant removal from soil and water: A critical review.

The promising characteristics of nanoscale zero-valent iron (nZVI) have not been fully exploited owing to intrinsic limitations. Carbon-enriched biochar (BC) has been widely used to overcome the limitations of nZVI and improve its reaction with environmental pollutants. This work reviews the preparation of nZVI/BC nanocomposites; the effects of BC as a supporting matrix on the nZVI crystallite size, dispersion, and oxidation and electron transfer capacity; and its interaction mechanisms with contaminants.

Soil lead immobilization by biochars in short-term laboratory incubation studies.

Exchangeable lead (Pb) extracted by ammonium acetate from three independent incubation studies was assessed to understand the influence of feedstock, pyrolysis temperatures, and production conditions on Pb immobilization capacities of different biochars. Vegetable waste biochar, pine cone, wood bark, cocopeat, red pepper stalk, and palm kernel shell were used as feedstocks (food supply and agricultural wastes) to produce biochars at 200-650 °C with and without N/CO. Biochars were applied at 5 and 2.

Effect of biochars pyrolyzed in N and CO, and feedstock on microbial community in metal(loid)s contaminated soils.

Little is known about the effects of applying amendments on soil for immobilizing metal(loid)s on the soil microbial community. Alterations in the microbial community were examined after incubation of treated contaminated soils. One soil was contaminated with Pb and As, a second soil with Cd and Zn.

Removal of hexavalent chromium in aqueous solutions using biochar: Chemical and spectroscopic investigations.

Biochar is an emerging low-cost sorbent used for removing trace metals from water. In this study, we evaluated the removal potential of aqueous hexavalent chromium (Cr(VI)) by biochars produced from soybean (Glycinemax L.) and burcucumber (Sicyos angulatus L.

Characterization of bioenergy biochar and its utilization for metal/metalloid immobilization in contaminated soil.

This study is a comparison of the effect of biochar produced by bioenergy systems, via the pyrolysis and gasification processes, on the immobilization of metals/metalloids in soil. Because the processes for these two techniques vary, the feedstocks undergo different heating regimens and, as a result, their respective char products exhibit different physico-chemical properties. Therefore, this study focuses on (1) the characterization of derivative biochar from the bioenergy system to understand their features and (2) an exploration of various biochar impacts on the mobility of As and Pb in contaminated soil.

Metal(loid) immobilization in soils with biochars pyrolyzed in N and CO environments.

Previous studies indicated that using CO as a reaction agent in the pyrolysis of biomass led to an enhanced generation of syngas via direct reaction between volatile organic carbons (VOCs) evolved from the thermal degradation of biomass and CO. In addition, the physico-chemical properties of biochar in CO were modified. In this current study, biochars generated from red pepper stalks in N and CO (RPS-N and RPS-C, respectively) were tested for their effects on the immobilization of Pb, Cd, Zn, and As in contaminated soils.

Correction to: Determining soil quality in urban agricultural regions by soil enzyme-based index.

Unfortunately, in the original publication of the article, Prof. Yang Sik Ok's affiliation was incorrectly published. The author's affiliation is as follows.

Mechanistic insights of 2,4-D sorption onto biochar: Influence of feedstock materials and biochar properties.

Objective of this study was to investigate the mechanisms of 2,4-Dichlorophynoxy acetic acid (2,4-D) sorption on biochar in aqueous solutions. Sorption isotherm, kinetics, and desorption experiments were performed to identify the role of biochars' feedstock and production conditions on 2,4-D sorption. Biochars were prepared from various green wastes (tea, burcucumber, and hardwood) at two pyrolytic temperatures (400 and 700°C).

Determining soil quality in urban agricultural regions by soil enzyme-based index.

Urban agricultural soils are highly variable, and careful selection of sensitive indicators is needed for the assessment of soil quality. This study is proposed to develop an index based on soil enzyme activities for assessing the quality of urban agricultural soils. Top soils were collected from urban agricultural areas of Korea, and soil chemical properties, texture, microbial fatty acids, and enzyme activities were determined.

Slow pyrolyzed biochars from crop residues for soil metal(loid) immobilization and microbial community abundance in contaminated agricultural soils.

This study evaluated the feasibility of using biochars produced from three types of crop residues for immobilizing Pb and As and their effects on the abundance of microbial community in contaminated lowland paddy (P-soil) and upland (U-soil) agricultural soils. Biochars were produced from umbrella tree [Maesopsis eminii] wood bark [WB], cocopeat [CP], and palm kernel shell [PKS] at 500 °C by slow pyrolysis at a heating rate of 10 °C min. Soils were incubated with 5% (w w) biochars at 25 °C and 70% water holding capacity for 45 d.