Advanced statistical analyses to reduce inconsistencies in bond strength data focused on donor factors: A six-factor analysis using linear mixed and nonlinear regression models.

Purpose: This study aimed to investigate the effects of the age and sex of tooth donors on dentin bond strength.

Methods: A total of 38 extracted teeth (12 male and 26 female donors; age range: 17-82 years) were used in this study. In addition to donor age and sex, four other microtensile bond strength (μTBS) test specimen factors were evaluated: dentin position, bonding area, presence of voids at the interface, and computed tomography (CT) values of dentin.

Effect of filler contents on the bond strength of CAD/CAM resin crowns: New resin primer versus conventional silane agents.

Purpose This study aims to evaluate the effects of resin primers containing methyl methacrylate (MMA) and silane agent on the bonding effectiveness of indirect resin composite blocks with three different filler contents.Methods A commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite block and two experimental resin composite blocks with different filler contents were alumina-blasted and two surface treatments (primer and silane agent) were applied. The resin cement was built up, and the micro-tensile bond strength (μTBS) was measured after 24 hours, 1 month or 3 months of water storage (n = 24 per group).

Demonstration of an optical dentin hardness measuring device using bovine dentin with different demineralization times.

Significance: The increase in root caries is a serious problem as society ages. Root caries is diagnosed by inspection and palpation, which are qualitative. A method to objectively and quantitatively evaluate the progress of root caries in a clinical setting is strongly desired.

Effect of tooth temperature on the dentin bonding durability of a self-curing adhesives: The discrepancy between the laboratory setting and inside the mouth.

A two-bottle self-curing universal adhesive (Tokuyama Universal Bond; Tokuyama Dental) that does not require a long waiting time or light curing after application of the bonding material has been developed. This study aimed to evaluate the influence of tooth and adhesive temperature during the bonding procedure on the effectiveness of dentin bonding. The results showed that the tooth temperature affected the effectiveness of the dentin bonding; therefore, to determine the precise bonding ability in the laboratory, the temperature of the tooth must be raised until it is the same as that of the oral cavity.

Combination of a silane coupling agent and resin primer reinforces bonding effectiveness to a CAD/CAM indirect resin composite block.

The effects of silanization and resin primer application on CAD/CAM indirect resin composite block bonding were investigated. KATANA AVENCIA P blocks (Kuraray Noritake Dental) were treated with a silane coupling agent and/or a resin primer. The contact angles (CAs) of resin primer were observed before and after silanization.

Four-year clinical evaluation of CAD/CAM indirect resin composite premolar crowns using 3D digital data: Discovering the causes of debonding.

Purpose: To analyze the causes of debonding of computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin composite premolar crowns with a focus on the morphological factors of the crown and abutment teeth.

Methods: The clinical courses of 109 CAD/CAM indirect resin composite crowns were observed, and the patients' background characteristics, crown locations, luting methods, types of abutments, distal-most/non-distal-most molars, and types of resin blocks were confirmed. To investigate the influence of the morphology of the crown and abutment teeth, the 1) vertical dimension of the abutment teeth, 2) taper, and 3) thickness of the crown occlusal surface during events were measured from the three-dimensional digital data.

Status of decontamination methods after using dentin adhesion inhibitors on indirect restorations: An integrative review of 19 publications.

The purpose of this review was to assess the literature regarding the decontamination of resin cement before the luting procedure in order to provide clinicians with a comparative overview of decontamination effects. A total of 19 articles were selected for inclusion in this review. The results indicated that bonding effectiveness is reduced due to residual adhesion inhibitors such as saliva, blood, hemostatic agents, and temporary/provisional cement.

Does the bonding effectiveness of a fiber post/resin composite benefit from mechanical or chemical treatment? Seven methods for saliva-contaminated surfaces.

Purpose: This study examined four cleaning methods and three chemical treatments for artificial saliva-contaminated fiber posts in terms of bonding durability to resin composite core materials.

Methods: Non-contaminated fiber posts (Tokuyama FR Post, Tokuyama Dental) and those contaminated (GC Fiber Post, GC) with artificial saliva (Saliveht Aerosol, Teijin Pharma) were used. Washing and drying (WD), alcohol cleaning (AlC), H3PO4 etching (P/WD), alumina blasting (B/D) for decontamination and silanization (Clearfil Ceramic Primer Plus, Kuraray Noritake Dental, Si), resin priming (HC Primer, Shofu, MMA), and bonding resin application (Clearfil Universal Bond Quick, Kuraray Noritake Dental, BR) for chemical treatment were performed.

Development of dental inspection method: Nondestructive evaluation of an adhesive interface by ACTIVE acoustic emission.

Purpose: This study aims to confirm the usefulness of active acoustic emission (Active AE) for reproducible and non-invasive generation of physical external force which is required for conventional AE.

Methods: Experiment 1: A root dentin-resin adhesive interface was observed. The post space was filled with a dual-cure resin composite core material with and without adhesive.

Novel testing method to evaluate the mechanical strength of self-adhesive resin cements with reflection of cement thickness.

This study aimed to propose an evaluation method for testing the mechanical strength of film-formed self-adhesive resin cements (SARCs) while reflecting cement layer thickness. Three commercially available dual-cure type SARCs were used for tensile and shear tests using specimens with varying thicknesses (0.05, 0.

Do resin core build-ups obtain the benefits of higher bonding ability from direct or indirect technique?

Purpose This study evaluated the effects of different materials (composite resin system including a photo-cure adhesive (DC) vs. resin cement system including a self-etching primer (PV)) and techniques (direct vs. indirect) for resin core build-up on the bonding performance to root canal dentin.

Development of dental inspection method: nondestructive evaluation of a dentin-adhesive interface by acoustic emission.

Purpose The state of adhesion between root dentin and a resin composite core material was inspected using acoustic emission (AE).Methods A total of 14 human incisors and premolars were used to prepare "no-adhesive group" and "adhesive group" specimens. For "adhesive group" specimens, a bonding agent was applied to root canal dentin.

Development of novel measurement method for consistency of resin cements.

The aim of this study was to develop a new method to evaluate the consistency of resin cements by modeling the operation of setting a crown. First, the weight of the resin cements and the inner surface area of the crown were measured to configure the conditions for consistency evaluation using a model abutment tooth and a model crown. As the evaluation method, a 200 mm contact surface area of a glass plate was placed on top of 30.

Back to the multi-step adhesive system: A next-generation two-step system with hydrophobic bonding agent improves bonding effectiveness.

This study evaluated the bonding effectiveness of a newly developed two-step hydrophobic bonding material. Three groups using different bonding systems were compared: BZF group, using the new bonding system (BZF-29; GC, Tokyo, Japan); GPB group, using a one-step bonding system (G-Premio Bond; GC); and SE2 group, using a two-step bonding system (CLEARFIL SE Bond 2; Kuraray Noritake Dental, Tokyo, Japan). Microtensile bond strength (µTBS) was measured after storage in water for 24 h, 3 months and 6 months (n=25/group).

Critical review about two myths in fixed dental prostheses: Full-Coverage vs. Resin-Bonded, non-Cantilever vs. Cantilever.

The purpose of this review was to assess the literature regarding four types of fixed dental prostheses (FDPs)/resin-bonded FDPs (RBFDPs) to provide clinicians with a comparative overview of two myths: "RBFDPs are easy to debond in patients' mouths" and "cantilever RBFDPs still have some clinical problems, especially in terms of overloading the abutment teeth and being easy to debond". A total of 782 papers were identified, 753 of which were judged unsuitable and thus excluded, leaving a total of 29 articles for inclusion in this review. The results indicated that 1) Two-retainer RBFDPs achieve clinical results comparable to full-coverage three-unit FDPs; 2) Cantilever RBFDPs show excellent long-term clinical outcomes (especially in incisor teeth) compared with other FDPs; 3) RBFDPs typically show less catastrophic failure than conventional FDPs, rebonding should be considered when debonding occurs; and 4) Cantilever RBFDPs can be recommended as defect replacement prostheses for maxillary lateral incisors and mandibular incisor teeth.

MDP is effective for removing residual polycarboxylate temporary cement as an adhesion inhibitor.

The effect of cleaner containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) for removing temporary cement remnants on dentin surface was evaluated. Flat dentin surfaces were wet-polished (Co) and HY-BOND temporary cement hard (Shofu) was applied to the surface. This temporary cement was removed using an air-scaler (Sc), brush (Br), or phosphoric acid and NaOCl (NC).

Adhesion procedures for CAD/CAM indirect resin composite block: A new resin primer versus a conventional silanizing agent.

Purpose: The purpose of this study was to evaluate the effectiveness of both a resin primer containing methyl methacrylate (MMA) and a silanizing agent on bonding to indirect resin composite blocks, using two types of build-up hybrid resin composites.

Methods: SHOFU BLOCK HC (Shofu) specimens were blasted with alumina, after which one of two surface treatments was applied: CERA RESIN BOND (Shofu, the Silane group) or HC primer (Shofu, the MMA group). Resin composites made using either Solidex Hardura (SDH, Shofu) or Ceramage Duo (CMD, Shofu) were built up and micro-tensile bond strength (μTBS) values were measured after storage in water for either 24h or 6 months (n=24 per group).

Effectiveness of pretreatment with phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on root canal dentin resin bonding.

Purpose: The purpose of this study was to evaluate the effect of pretreatment using phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on the bonding of one-step self-etching adhesives to root canal dentin.

Methods: Thirty-six single-rooted sound human premolars were randomly assigned into three groups before applying the one-step self-etching adhesive. These comprised a control group with no pretreatment, an NC group that received phosphoric acid and subsequent sodium hypochlorite gel pretreatments, and an NC+AC group that received an additional treatment with sulfinic acid sodium salt following the same pretreatment applied to the NC group.

Effectiveness of current adhesive systems when bonding to CAD/CAM indirect resin materials: A review of 32 publications.

The purpose of this review was to assess the available literature regarding bonding between current adhesive systems and computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin materials, to provide clinicians with a comparative overview of the relevant bonding procedures. An electronic search was performed through PubMed based on the keywords CAD/CAM and dental bonding. Additional relevant literature was obtained from the citations in the articles.

Effects of exercise therapy on painful temporomandibular disorders.

Temporomandibular disorders (TMD) are common chronic musculoskeletal pain conditions among orofacial pain. Painful TMD condition such as myalgia and arthralgia can be managed by exercise therapy. However, as it is hard to access actual effect of each modality that is included in an exercise therapy programme due to multiple choice of the management modality, their efficacy remains controversial.

Effects of three drying methods of post space dentin bonding used in a direct resin composite core build-up method.

Purpose: The purpose of this study was to evaluate drying methods for post space dentin bonding in a direct resin composite core build-up method.

Methods: Experiment 1: Four root canal plastic models, having diameters of 1.0 or 1.

Effectiveness of sodium hypochlorite and sulfinic acid sodium salt treatment on dentin-resin bonding: Long-term durability of one-step self-etching adhesive.

This study aimed to evaluate the effect of sulfinic acid sodium salt interposition after acid and sodium hypochlorite treatment (NC treatment) on dentin bonding durability using a mild type one-step self-etching adhesive. Fifteen human third molars were randomly assigned into three experimental groups according to dentin pretreatment before applying the one-step self-etching adhesive: Cont group, without pretreatment; NC group, pretreatment with phosphoric acid and sodium hypochlorite gel; and NC+AC group, additional treatment with sulfinic acid sodium salt followed by the same pretreatment of the NC group. Microtensile bond strength was measured and the pre-treated dentin surface, fracture modes, and bonding interface were observed.