Depth of Cure of Resin-Based Composites Irradiated With Three Types of Light-Curing Units at Different Output Intensities.

Aim Dental light-curing units (LCUs) are used at Matsumoto Dental University Hospital (MDUH). However, the time of installation of the same type of light irradiator varies, which affects the output intensity of the LCU. The purpose of this study was to evaluate the performance of LCU with different output intensities by comparing the depth of cure (DOC) of resin-based composites (RBCs).

Changes in Gloss Alteration, Surface Roughness, and Color of Direct Dental Restorative Materials after Professional Dental Prophylaxis.

In the context of optimizing dental care for patients who are elderly, the purpose of this in vitro study was to evaluate the surface gloss (with a micro-area gloss meter) of, surface roughness (with a compact surface roughness measuring instrument) of, and color change (with a dental colorimeter) in two commercially available injectable resin-based composites (Estelite Universal Flow (EUF) and Beautifil Flow Plus F00 (BFP)) as well as two glass-ionomer cements (GC Fuji II LC CAPSULE (FLC) and GC Fuji IX GP EXTRA CAPSULE (FGP)), before and after dental prophylaxis. After 24 h, the surfaces of each specimen were polished at 2500 rpm with a prophy brush (Mersage Brush, Shofu) and one-step prophylaxis paste (Prophy Paste Pro, Directa): under 100 or 300 gf load, and for 10 or 30 s, 4× cycles of cleaning. After mechanical cleaning, conditions were found for a significant reduction in the gloss level (EUF, BFP, or FLC; < 0.

Lewis Adduct-Dissociating Hydrolysis of Boratrane for Water-Triggered Dehydration of Copolymers with a Hydrophobic Moiety.

As a new example of intrinsically water-triggered phenomena, we report underwater dehydration of the statistical copolymers synthesized from triethanolamine borate (TEAB) methacrylate and styrene (St) induced by the hydrolysis of the pendant TEAB group. TEAB possesses high polarity owing to its internal Lewis adduct structure, which is lost by hydrolysis to triethanolamine (TEA) with a lower dipole moment. Therefore, the hydration of the copolymers became unfavorable through the hydrolysis of the pendant TEAB to TEA, despite polyol formation, and through a hydrophobic interaction based on St moieties becoming alternatively dominant.

Combined use of baking soda and electric toothbrushing for removal of artificial extrinsic stain on enamel surface: An study.

Background: This study aimed to investigate the combined effect of baking soda and electric toothbrushing on the removal of artificial extrinsic stain .

Material And Methods: Flat enamel surfaces of 15 bovine incisors were artificially stained with 10% citric acid / 3% ferric chloride solution followed by 1% tannic acid solution. These specimens were randomly divided into three groups (n = 5) - Group S+B: brushing with an electric toothbrush and baking soda, Group S+C: brushing with an electric toothbrush and fluoride dentifrice, Group S: brushing only with an electric toothbrush.

Marginal Leakage of Endodontic Temporary Restorative Materials around Access Cavities Prepared with Pre-Endodontic Composite Build-Up: An In Vitro Study.

This study aimed to examine the marginal seal between various commercial temporary restorative materials and exposed dentin/built-up composite. Sixty bovine incisors were cut above the cemento-enamel junction, and half of the dentin was removed to form a step, which was built up using flowable resin composite. The root canals were irrigated, filled with calcium hydroxide, and sealed using one of six temporary sealing materials (hydraulic temporary restorative material, temporary stopping material, zinc oxide eugenol cement, glass-ionomer cement, auto-cured resin-based temporary restorative material, and light-cured resin-based temporary restorative material) ( = 10 for each material).

Combined effects of electric toothbrushing and dentifrice on artificial stain removal: An study.

Background: This study aimed to clarify the combined effect of electric toothbrushing and dentifrice on the removal of artificial stain.

Material And Methods: Twenty-five bovine incisors were cut at the cervix and the crown was embedded in auto-cured acrylic resin. Specimens were abraded using #240 SiC paper to obtain a flat enamel surface, and 20 specimens were treated with 10% citric acid / 3% ferric chloride solution followed by 1% tannic acid solution to produce surface staining.

GPDM- and 10-MDP-based Self-etch Adhesives Bonded to Bur-cut and Uncut Enamel - "Immediate" and "Aged" µTBS.

Purpose: To determine the microtensile bond strength (µTBS) of two 2-step self-etch adhesives (SEAs) to bur-cut and uncut enamel.

Materials And Methods: The buccal and lingual enamel surfaces of 15 teeth were ground flat ("bur-cut" enamel), while the enamel surface of another set of 15 teeth was solely prophylactically cleaned ("uncut" enamel). Resin composite was bonded to the surfaces using the GPDM-based SEA OptiBond XTR (Kerr), the 10-MDP-based SEA Clearfil SE Bond (Kuraray Noritake), or the 3-step etch-and-rinse adhesive (E&RA) OptiBond FL (Kerr) that served as the gold-standard control.

Effect of professional dental prophylaxis on the surface gloss and roughness of CAD/CAM restorative materials.

Background: This study aimed to evaluate the effect of dental prophylaxis on the surface gloss and roughness of different indirect restorative materials for computer-aided design/computer-aided manufacturing (CAD/CAM): two types of CAD/CAM composite resin blocks (Shofu Block HC and Estelite Block) and two types of CAD/CAM ceramic blocks (IPS Empress CAD and Celtra DUO).

Material And Methods: After polishing the CAD/CAM blocks and applying prophylaxis pastes, professional dental prophylaxis was performed using four different experimental protocols (n = 5 each): mechanical cleaning with Merssage Regular for 10 s four times (Group 1); four cycles of mechanical cleaning with Merssage Regular for 10 s and Merssage Fine for 10 s (Group 2); four cycles of mechanical cleaning with Merssage Regular for 10 s and Merssage Fine for 30 s (Group 3); and mechanical cleaning with Merssage Fine for 10 s four times (Group 4). A glossmeter was used to measure surface gloss before and after mechanical cleaning, and a contact stylus profilometer was used to measure surface roughness (Ra).

SURVEY OF DENTAL STUDENTS' ATTITUDE REGARDING ORIENTAL MEDICINE/COMPLEMENTARY AND ALTERNATIVE MEDICINE: COMPARISON BETWEEN TWO JAPANESE DENTAL SCHOOLS.

Background: The present study aimed to examine the impact of "curricula for undergraduate education in oriental medicine (OM)/complementary and alternative medicine (CAM)" on student awareness of OM. A questionnaire survey was conducted involving the Nagasaki University School of Dentistry (NUSD), a university that implements education in OM as part of its undergraduate curriculum, and Tokyo Dental College (TDC), which does not teach OM.

Materials And Methods: The third- and fifth-year students of both NUSD and TDC underwent the anonymous questionnaire survey, which included questions regarding their knowledge of OM and CAM, interests in these subjects, and their opinions on the necessity of teaching OM in the undergraduate dental education, and the results were collected for analysis.

Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber.

This study evaluated the microtensile bond strength (TBS) of 1-step self-etch adhesives (1-SEAs) and 2-step self-etch adhesives (2-SEAs) to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (HO) solution with quartz-tungsten-halogen light-curing unit (Group 1) and 3.5% HO-containing titanium dioxide (TiO) (Pyrenees®) activated with 405-nm violet diode laser for 15 min (Group 2).

Luting of CAD/CAM ceramic inlays: direct composite versus dual-cure luting cement.

The aim of this study was to investigate bonding effectiveness in direct restorations. A two-step self-etch adhesive and a light-cure resin composite was compared with luting with a conventional dual-cure resin cement and a two-step etch and rinse adhesive. Class-I box-type cavities were prepared.

Correlations between Perceived Oral Malodor Levels and Self-Reported Oral Complaints.

Objectives. Even though objective data indicating the absence of oral malodor are presented to patients, they may be skeptical about the results, possibly due to the presence of some discomfort in the oral cavity. The objective of this study was to investigate whether there is an association among self-perceptions of oral malodor, oral complaints, and the actual oral malodor test result.

Influence of hydrophilic pre-treatment on resin bonding to zirconia ceramics.

Atmospheric plasma or ultraviolet (UV) treatment alters the surface characteristics of tetragonal zirconia polycrystal (TZP), increasing its hydrophilicity by reducing the contact angle against water to zero. This suggests that such treatment would increase the wettability of bonding resin. The purpose of this study was to determine how increasing the hydrophilicity of TZP through plasma irradiation, UV treatment, or application of ceramic primer affected initial bonding with resin composites.

Personality traits in patients with oral malodor.

Many patients presenting at oral malodor clinics have psychological halitosis, which is characterized as being obsessive about having oral malodor or being distressed from a keen awareness of oral odor. We used the Tokyo University Egogram (TEG) to evaluate personality traits in patients presenting at the oral malodor clinic of this institute. The incidence of each TEG personality type was compared between a total of 600 patients presenting at the clinic and a cohort of healthy individuals.

Career paths and aspirations among postgraduate dental trainees on completion of clinical residency program at Tokyo Dental College.

Career paths and aspirations were investigated among postgraduate dental trainees on completion of clinical training at Tokyo Dental College between 2006, when clinical residency became mandatory, and 2011. Overall, those finding employment with independent general dental practitioners accounted for the majority (34%), followed by those entering postgraduate courses at the Chiba Hospital (20%), those embarking on a postgraduate clinical specialty course at the Chiba Hospital (16%), and those going on to other universities (7%). At the Chiba Hospital, the number selecting postgraduate courses, residency training (including further residency training or a postgraduate clinical specialty course), or employment with a general dental practitioner was almost the same; however, the number selecting postgraduate courses at the Suidobashi Hospital was low, showing a strong tendency toward becoming a general or clinical practitioner.

Influence of different rubber dam application on intraoral temperature and relative humidity.

The purpose of this study was to investigate the effect of type of rubber dam and application method on the moisture exclusion effect. The intraoral temperature and relative humidity were compared among various moisture exclusion appliances. Various dry field techniques were applied to 5 subjects and intraoral temperature and relative humidity measured 5 min after placing a digital hygro-thermometer in the mouth.

Recent trends among dental residents at Tokyo Dental College.

Trends among dental residents at Tokyo Dental College between 2006, at which time clinical residency became mandatory, and 2011 were analyzed and the following results obtained. Almost all the eligible students from our school participated in the orientation seminar on dental residency programs. Although the number varied slightly by year, approximately 70 to 150 students from other schools also participated in these orientation seminars.

Analysis of dental treatment performed by dental residents at General Dentistry Department of Tokyo Dental College Chiba Hospital over 6 years following introduction of mandatory dental clinical training system.

Six years have passed since the introduction of legislation mandating at least 1 year of clinical training for those who have passed the national dentist examination. To determine whether clinical training has been appropriately implemented at the General Dentistry Department of Tokyo Dental College Chiba Hospital, a managed-type clinical training facility, the number of patients treated and types of dental and dental technical work performed by dental residents trained by the department were summarized and analyzed. The number of patients treated per dental resident increased from 11 in 2006 to 15 in 2011.

Effect of emitted wavelength and light guide type on irradiance discrepancies in hand-held dental curing radiometers.

The purpose of this study was to determine any discrepancies in the outputs of five commercial dental radiometers and also to evaluate the accuracy of these devices using a laboratory-grade spectroradiometer. The power densities of 12 different curing light sources were repeatedly measured for a total of five times using each radiometer in a random order. The emission spectra of all of the curing light sources were also measured using the spectroradiometer, and the integral value of each spectrum was calculated to determine the genuine power densities, which were then compared to the displayed power densities measured by the dental radiometers.

Durable bonding to mechanically and/or chemically pre-treated dental zirconia.

Objectives: To evaluate the effect of mechanical and chemical surface pre-treatment on the bond durability of two composite cements to dental zirconia.

Methods: Fully sintered IPS e.max ZirCAD (Ivoclar-Vivadent) blocks were either subjected to tribochemical silica sandblasting (CoJet, 3M ESPE) or not mechanically pre-treated.

Character traits of malodor patients.

Many patients visit oral malodor clinics because of malodors which are brought to their attention by friends and family, or because they note the behavior of people around them, they suspect a problem and develop a fear of having an oral malodor. However, only around 30% of such patients actually have levels of malodor high enough to bother other people. Many patients exhibit halitophobia symptoms, which present as self-perception of malodor, and thus have a strong obsession about their smell which results in distress.

The effects of three dry-field techniques on intraoral temperature and relative humidity.

Background: The authors evaluated the effects of three dry-field techniques (rubber dam, Isolite i2 [Isolite Systems, Santa Barbara, Calif.] and Coolex [APT, Osaka, Japan]) on intraoral temperature and relative humidity (RH), compared with the effects of a nonisolated control on intraoral temperature and RH.

Methods: The authors measured the room's temperature and RH and then placed dry-field devices in five participants' mouths and measured the intraoral temperature and RH for 20 minutes.

Light-curing of dental resins with GaN violet laser diode: the effect of photoinitiator on mechanical strength.

The purpose of this study was to evaluate whether a Gallium Nitride (GaN) -based violet laser diode (VLM500) could be used as a light source for light-cured dental resins. Three experimental unfilled resins containing different photoinitiators (camphorquinone, CQ; phenyl propanedione, PPD; or mono acylphosphineoxide, MAPO) were evaluated. These resins were light-cured with a VLM500 laser diode, and their ultimate micro-tensile strengths (μTS) were compared to those cured with three different LED light sources (Curenos, G-Light Prima-normal mode and G-Light Prima-PL mode).

Light-curing efficiency of dental adhesives by gallium nitride violet-laser diode determined in terms of ultimate micro-tensile strength.

The purpose of this study was to evaluate whether violet-laser diode (VLD) can be used as light-curing source. The ultimate (micro-)tensile strength (μTS) of three adhesives was determined when cured by VLD in comparison with curing by two different types of commercial LED light-curing units. One VLD (VLM 500) and two LED units (Curenos and G-Light Prima) were used to cure the adhesive resin of the two-step self-etch adhesives Clearfil SE Bond, Tokuso Mac Bond II, and FL-Bond II.

Matching system within clinical training facilities group of clinical dental training in Tokyo Dental College Chiba Hospital.

Since clinical dental training became mandatory in April 2006, Tokyo Dental College Chiba Hospital has been offering the following two types of training system: 1. a single system, and 2. a clinical training facilities group system.