Accuracy of the Hounsfield Unit Values Measured by Implant Planning Software.

: The measurement of Hounsfield units (HU) during implant treatment planning is important. Currently, various manufacturers' implant planning software programs offer HU capabilities; however, their accuracy remains unverified. In this study, we aimed to validate the accuracy of HU values measured by implant planning software programs.

Verification of the accuracy of dynamic navigation for conventional and mouthpiece methods: in vivo study.

Background: Dynamic navigation for implant placement is becoming popular under the concept of top-down treatment. The purpose of this study is to verify the accuracy of a dynamic navigation system for implant placement.

Methods: Implant placement was performed on 38 patients using 50 implant fixtures.

Volume change after maxillary sinus floor elevation with apatite carbonate and octacalcium phosphate.

Purpose: Maxillary molars have low alveolar bone height diameter due to the presence of the maxillary sinus; thus, a sinus lift may be required in some cases. Changes in the volume of bone substitutes can affect the success of implant therapy. Therefore, this study aimed to compare the changes in the volume of two different bone substitutes-one based on carbonate apatite and the other on octacalcium phosphate-used in maxillary sinus floor elevation.

Haemodialysis patient with chronic kidney disease and pulmonary hypertension treated effectively with pulmonary vasodilators.

A male patient in his 70s on periodic haemodialysis complained of dysdialysis several months prior and was diagnosed subsequently with pulmonary hypertension (PH). To confirm this diagnosis, a catheter examination was performed after haemodialysis in the dry state. Pulmonary artery wedge pressure (PAWP), mean pulmonary artery (PA) pressure, cardiac index (CI) and pulmonary vascular resistance (PVR) were 9 mm Hg, 42 mm Hg, 2.

10-Valence-Electron C≡O and the 14-VE C≡Pt: Two Triple-Bonded Isoelectronic Families Differing by a δ Ring.

10-VE A≡A' Diatomics, such as N≡N, C≡O, etc., have a strong σπ triple bond plus a lone pair at each end. In our studies on 14-VE A≡B systems, such as C≡Pt, we find a similar bonding system plus a (5δ) ring.

Carbon dioxide adsorption to UiO-66: theoretical analysis of binding energy and NMR properties.

UiO-66 is one of the most valuable metal-organic frameworks because of its excellent adsorption capability for gas molecules and its high stability towards water. Herein we investigated adsorption of carbon dioxide (CO), acetone, and methanol to infinite UiO-66 using DFT calculations on an infinite system under periodic-boundary conditions and post-Hartree-Fock (SCS-MP2 and MP2.5) calculations on cluster models.

Comparative Verification of the Accuracy of Implant Models Made of PLA, Resin, and Silicone.

Polylactic acid (PLA) has gained considerable attention as an alternative to petroleum-based materials due to environmental concerns. We fabricated implant models with fused filament fabrication (FFF) 3D printers using PLA, and the accuracies of these PLA models were compared with those of plaster models made from silicone impressions and resin models made with digital light processing (DLP). A base model was obtained from an impact-training model.

Validation of an implant stability measurement device using the percussion response: a clinical research study.

Background: Several devices have been developed to measure implant-bone stability as an indicator of successful implant treatment; these include Osstell®, which measures the implant stability quotient (ISQ), and the more recent AnyCheck®, which relies on percussion for the implant stability test (IST). These devices make it possible to measure implant stability. However, no studies have compared the performance of AnyCheck® and Osstell® (i.

Fit accuracy of resin crown on a dental model fabricated using fused deposition modeling 3D printing and a polylactic acid filament.

Purpose We considered the possibility of reducing industrial waste by fabricating and reusing dental models prepared using a fused deposition modeling (FDM) 3D printer and polylactic acid (PLA) filaments. The purpose of this study was to verify the accuracy of models fabricated using FDM and PLA.Methods The same provisional crown was used to check the marginal fit on PLA models prepared using an intraoral scanner (IOS) and FDM, plaster models made with silicone impression material and plaster, and resin models prepared using an IOS and stereolithography apparatus (SLA) 3D printer.

Comparison of digital and silicone impressions for single-tooth implants and two- and three-unit implants for a free-end edentulous saddle.

Background: The use of intraoral scanners (IOS) has facilitated the use of digital workflows for the fabrication of implant-supported prostheses not only for single missing teeth, but also for multiple missing teeth. However, the clinical application of IOS and computer-aided design/manufacturing (CAD/CAM) in implant-supported prosthodontics remains unclear. This study aimed to compare the accuracy of digital and silicone impressions for single-tooth implants for bounded edentulous spaces and two-unit and three-unit implant-supported fixed dental prostheses for free-end edentulous spaces.

Accuracy of guided surgery using the silicon impression and digital impression method for the mandibular free end: a comparative study.

Background: Implant treatment using guided surgery is becoming widespread in clinical dental practice. Furthermore, the development of digital technology has enabled the use of intraoral scanners (IOSs) to fabricate surgical guide plates. The objective of this study was to compare the accuracy of guided surgery using the silicone impression method with a three-dimensional (3D) scanner and the digital impression method with IOS for one side of the mandibular free end.

Dental implant care and trouble among dependent patients based on the questionnaire survey among Japanese dental practitioners.

Background: Self-care and professional care of implants may prove difficult for elderly people who require nursing care. However, the actual state of care and problems remains unknown. In this study, we investigated the actual state of implant problems in elderly people living in their own home or in a nursing home who received visiting dental treatment.

Structural and Thermal Properties in Formamidinium and Cs-Mixed Lead Halides.

Formamidinium [FA, HC(NH)] lead iodide and its cation mixture have attracted interest as potentials in applications for efficient solar cells superior to well-known methylammonium lead iodide. We investigated the crystal structure and thermodynamic properties of high-quality single crystals of FACsPbI for = 0 and 0.1 through X-ray diffraction and heat capacity measurements.

Determination of Dipicolinic Acid in "Natto" by High-Performance Liquid Chromatography Coupled With Postcolumn Photoirradiation With Zinc Acetate.

A system was developed for determining dipicolinic acid in "natto" using liquid chromatography with fluorometric detection. The compound was separated by reversed-phase chromatography using a mobile phase of 0.1 mol/L disodium hydrogen phosphate, 0.

Simultaneous Determination of Kynurenine and Kynurenic Acid by High-Performance Liquid Chromatography Photoirradiation System Using a Mobile Phase Containing 18-crown-6.

A high-performance liquid chromatography (HPLC) system has been developed for the fluorometric determination of kynurenine (KYN) and kynurenic acid (KYNA) in human serum using a mobile phase containing 18-crown-6. A retention time of KYNA was adjusted with pH of phosphate buffer in 18-crown-6. KYN and KYNA were separated on a CAPCELLPAK C18 (250 × 4.

A preliminary report on dental implant condition among dependent elderly based on the survey among Japanese dental practitioners.

Background: The objective of this study was to ascertain the situation relevant to implants, the status of oral self-care, the status of aftercare provided by the dentist who placed the implant, and the usage status of the implant card, in homebound or institutionalized older adults who are receiving home-visit dental care due to the inability to visit a dental clinic on their own.

Methods: A survey questionnaire was sent by post mail to 2339 people who are representative members or dental specialists belonging to any of the following three academic societies: Japanese Society of Oral Implantology, Japanese Society of Gerodontology, and Japan Prosthodontic Society. The survey questions asked were about provision/no provision of implant treatment, provision/no provision of home-visit dental care, the situation of patients after implant treatment, the situation of implants in the context of home-visit dental care, and the usage status and recognition of the implant card.

Comparison of the paralogous transcription factors AraR and XlnR in Aspergillus oryzae.

The paralogous transcription factors AraR and XlnR in Aspergillus regulate genes that are involved in degradation of cellulose and hemicellulose and catabolism of pentose. AraR and XlnR target the same genes for pentose catabolism but target different genes encoding enzymes for polysaccharide degradation. To uncover the relationship between these paralogous transcription factors, we examined their contribution to regulation of the PCP genes and compared their preferred recognition sequences.

The effect of superior cervical ganglion resection on peripheral facial palsy in rats.

Purpose: Stellate ganglion block is performed to treat peripheral facial palsy because it increases blood flow and promotes nerve regeneration. Although stellate ganglion block increases blood flow around the facial nerve that runs outside the temporal bone, it may not affect blood flow inside the bone. Therefore, although stellate ganglion block is an effective procedure when the facial nerve is damaged outside the temporal bone, no studies have investigated the relationship between the site of nerve damage and the therapeutic effect of stellate ganglion block.

Pathological complete response rate in hormone receptor-negative breast cancer treated with neoadjuvant FEC, followed by weekly paclitaxel administration: A retrospective study and review of the literature.

While tumor size, the presence of inflammatory carcinoma and lymph node involvement are the main prognostic factors of women with locally advanced breast cancer, the prognostic value of the estrogen receptor, progesterone receptor and human epidermal growth factor receptor 2 (HER2) status has not been fully clarified. The present study examined the therapeutic efficacy of a neoadjuvant fluorouracil, epirubicin and cyclophosphamide regimen (FEC), followed by weekly paclitaxel and/or trastuzumab administration, in the treatment of hormone receptor-negative breast cancer patients. Between April 2012 and February 2014, 14 patients with hormone receptor-negative local breast cancer (triple-negative type, 9 patients; HER2 type, 5 patients) were included in the study.

Examination of the clinical efficacy of eribulin and trastuzumab in HER2-positive recurrent breast cancer.

There are limited studies reported that describe the efficacy of eribulin and trastuzumab in the treatment of recurrent breast cancer. The present study examined the therapeutic efficacy of eribulin and trastuzumab in the treatment of recurrent breast cancer. Between October 2011 and August 2013, 5 recurrent breast cancer patients who were treated with eribulin and trastuzumab were included in the study.

Pathological response rate in hormone-positive breast cancer patients treated with neoadjuvant FEC and triweekly docetaxel: a case series.

We recently reported that neoadjuvant 5-FU, epirubicin, and cyclophosphamide (FEC) followed by weekly paclitaxel and/or trastuzumab induced a high pathological complete response (pCR) rate in hormone-negative patients. The present study examined the therapeutic efficacy of neoadjuvant FEC followed by triweekly docetaxel and/or trastuzumab in the treatment of hormone-positive patients. Between February 2012 and December 2013, 16 hormone-positive patients with local breast cancer (luminal A type: six patients; luminal B type: two patients; luminal HER2 type: eight patients) were included in the study.

Cognitive impairment before changes appear on [18F]-fluoro-D-glucose positron emission tomography images in a patient with possible early-stage cerebellar-predominant multiple system atrophy.

Multiple system atrophy (MSA) is a sporadic, rapidly progressive neurodegenerative disorder characterized by autonomic dysfunction combined with parkinsonism or cerebellar ataxia. Patients with MSA typically suffer from cognitive disorders and rapid eye movement sleep behaviour disorder. F-fluorodeoxyglucose-positron emission tomography is used to assess MSA.

Bortezomib and dexamethasone for multiple myeloma: higher AST and LDH levels associated with a worse prognosis on overall survival.

Background: Bortezomib offers a novel approach to the treatment of multiple myeloma producing rapid control. The aim of this study was to investigate the outcomes of bortezomib and dexamethasone-treated patients with multiple myeloma.

Methods: We conducted a retrospective study of 44 consecutively-treated multiple myeloma patients with bortezomib (1.

Effective elimination of contaminants after oral care in elderly institutionalized individuals.

After mechanical cleaning in oral care, eliminating residual oral contaminants has an important role in preventing their aspiration, especially in individuals with weak airway protection. We examined the effectiveness of wiping the oral cavity after oral care on eliminating contaminants in 31 patients who were hospitalized in our neurology inpatient unit. The amount of bacteria on the tongue, palate, and buccal vestibule was counted before and just after oral care, after eliminating contaminants either by rinsing with water and suction or by wiping with mouth wipes, and 1 h after oral care.