Tissue engineered periosteum: Fabrication of a gelatin basedtrilayer composite scaffold with biomimetic properties for enhanced bone healing.

The periosteum, a vascularized tissue membrane, is essential in bone regeneration following fractures and bone loss due to some other reasons, yet there exist several research gaps concerning its regeneration. These gaps encompass reduced cellular proliferation and bioactivity, potential toxicity, heightened stiffness of scaffold materials, unfavorable porosity, expensive materials and procedures, and suboptimal survivability or inappropriate degradation rates of the implanted materials. This research used an interdisciplinary approach by forming a new material fabricated through electrospinning for the proposed application as a layer-by-layer tissue-engineered periosteum (TEP).

Graphene oxide reinforced silk fibroin nanocomposite as an electroactive interface for the estimation of dopamine.

The fabrication of 2D materials and polymer-based nanocomposites deposited on flexible conductive interfaces has unblocked new horizons to expedite reaction kinetics for developing highly selective and sensitive electrochemical biosensors. Herein, we developed a novel biosensing platform, comprising graphene oxide and a silk fibroin-based nanocomposite, drop-cast on a carbon cloth electrode. The fabricated interface was expected to be a robust and miniaturized sensing platform for precise detection of dopamine (DA).

Electrospun Antibacterial Composites for Cartilage Tissue Engineering.

Implantation of biomaterials capable of the controlled release of antibacterials during articular cartilage repair may prevent postoperative infections. Herein, biomaterials are prepared with biomimetic architectures (nonwoven mats of fibers) via electrospinning that are composed of poly(ɛ-caprolactone), poly(lactic acid), and Bombyx mori silk fibroin (with varying ratios) and, optionally, an antibiotic drug (cefixime trihydrate). The composition, morphology, and mechanical properties of the nanofibrous mats are characterized using scanning electron microscope, Fourier transform infrared spectroscopy, and tensile testing.

Smart injectable self-setting bioceramics for dental applications.

A thermo-responsive injectable bioactive glass (BAG) that has the ability to set at body temperature was prepared using pluronic F127 and hydroxypropyl methylcellulose as the carrier. The injectable composite has the advantage to fill irregular shape implantation sites and quick setting at body temperature. The structural and morphological analysis of injectable BAG before and after setting was done by using Fourier Transform Infrared spectroscopy (FTIR), and Scanning Electron Microscope (SEM).

Thyroxine-loaded chitosan/carboxymethyl cellulose/hydroxyapatite hydrogels enhance angiogenesis in in-ovo experiments.

Angiogenesis is one of the most important processes in repair and regeneration of many tissues and organs. Blood vessel formation also play a major role in repair of dental tissue(s) after ailments like periodontitis. Here we report the preparation of chitosan/carboxymethyl cellulose/hydroxyapatite based hydrogels, loaded with variable concentrations of thyroxin i.

Effects of Chromium-Loaded Chitosan Nanoparticles on the Intestinal Electrophysiological Indices and Glucose Transporters in Broilers.

The present study aimed to evaluate the effect of chromium-loaded chitosan nanoparticles (Cr-CNPs) on the electrophysiological indices, gene expression of glucose transporters, and tissue glycogen in broilers. A total of 200 one-day-old broilers were randomly divided into five groups, with each having five replicates (n = 8). Group A was fed a corn-soybean meal diet, while the diets of groups B, C, D, and E were supplemented with 200, 400, 800, and 1200 µg/kg of Cr as Cr-CNPs, respectively.

Bi-layered α-tocopherol acetate loaded membranes for potential wound healing and skin regeneration.

With an increase in the demand for skin regeneration products, there is a noticeable increase in developing materials that encourage, wound healing and skin regeneration. It has been reported that antioxidants play an important role in anti-inflammatory reactions, cellular proliferation and remodeling phase of wound healing. While consideration all these factors, a novel α-tocopherol acetate (vitamin E) (VE) loaded bi-layered electrospun membrane, based on lower polycaprolactone (PCL) layer and upper polylactic acid (PLA) layer, was fabricated through electrospinning.

Bacterial adaptability of enzyme and pH dual-responsive surface for infection resistance.

A major challenge in antibacterial surface preparation is the elaborated implementation of controlled antibacterial agent delivery on demand, typically at appropriate concentrations and sites, which can be an efficient way to lower bacteria resistance and improve therapy effectiveness. Herein, we present a bacterial hyaluronidase (HAase) and pH dual-responsive antimicrobial surface, which is constructed by sequential layer-by-layer (LbL) assembly of NHS-PEG-NHS (PEG-bis(succinimidyl succinate)) and PEI (polyethylenimine), immobilization of antibiotic vancomycin (Van) by an acid-labile β-carboxylic linker and electrostatic adsorption of HA. The HA upper layer can endow the multilayer surface with excellent biocompatibility under normal physiological conditions.

Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts.

Nanoparticles are well recognized for their biological applications including tissue-regeneration due to large surface area and chemical properties. In this study, K-doped zinc oxide (ZnO) nanoparticles containing porous hydrogels were synthesized via freeze gelation. The morphology and pore dimensions were studied by scanning electron microscopy (SEM).

Hydroxypropylmethyl cellulose (HPMC) crosslinked chitosan (CH) based scaffolds containing bioactive glass (BG) and zinc oxide (ZnO) for alveolar bone repair.

The success of a dental implant relies on the presence of an optimal alveolar ridge. The aim of this study was to fabricate HPMC crosslinked chitosan based scaffolds for alveolar bone repair. Our results indicated that HPMC crosslinked CH/BG foams presented better morphological structure (132-90.

Temperature-Responsive Hierarchical Polymer Brushes Switching from Bactericidal to Cell Repellency.

Unlike conventional poly(N-isopropylacrylamide) (PNIPAM)-based surfaces switching from bactericidal activity to bacterial repellency upon decreasing temperature, we developed a hierarchical polymer architecture, which could maintain bactericidal activities at room temperature while presenting bacterial repellency at physiological temperature. In this architecture, a thermoresponsive bactericidal upper layer consisting of PNIPAM-based copolymer and vancomycin (Van) moieties was built on an antifouling poly(sulfobetaine methacrylate) (PSBMA) bottom layer via sequential surface-initiated photoiniferter-mediated polymerization. At room temperature below the lower critical solution temperature (LCST), the PNIPAM-based upper layer was stretchable, facilitating contact killing of bacteria by Van.

Chitosan/hydroxyapatite (HA)/hydroxypropylmethyl cellulose (HPMC) spongy scaffolds-synthesis and evaluation as potential alveolar bone substitutes.

Alveolar bone loss is associated with infections and its augmentation is a pre-requisite for the success of dental implants. In present study, we aim to develop and evaluate novel freeze dried doxycycline loaded chitosan (CS)/hydroxyapatite (HA) spongy scaffolds where hydroxypropylmethyl cellulose (HPMC) was added as a crosslinker. Scaffolds displayed compressive strength of 14MPa/cm and 0.

Organocatalyzed Novel Synthetic Methodology for Highly Functionalized Piperidines as Potent α-Glucosidase Inhibitors.

An efficient atom-economic one-pot synthesis of highly functionalized piperidines was achieved by catalytic multicomponent reaction. A wide range of heterogeneous and homogenous catalysts were explored; however, promising results were achieved when a β-keto-ester was reacted with selected aromatic aldehydes and anilines by using N-acetyl glycine (NAG) as catalyst. The implication of this methodology is straightforward since the products were precipitated out from the reaction solution, eliminating the need of column chromatography purifications.

Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass.

In this manuscript for the first time calcium hydroxide (Ca(OH)2) has been used for preparation of bioactive glass (BG-2) by co-precipitation method and compared with glass prepared using calcium nitrate tetrahydrate Ca(NO3)2·4H2O (BG-1), which is a conventional source of calcium. The new source positively affected physical, biological and mechanical properties of BG-2. The glasses were characterized by Fourier transform infrared (FTIR), X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis/Differential Scanning Calorimetry (TGA-DSC), BET surface area analysis and Knoop hardness.

Cholinesterase Inhibitory Activities of N-Phenylthiazol-2-Amine Derivatives and their Molecular Docking Studies.

Alzheimer's disease (AD) is a type of neurodegenerative disorder which is responsible for many cognitive dysfunctions. According to the most accepted cholinergic hypothesis, cholinesterases have a major role in AD symptoms. The use of small molecules as inhibitors is one of the most useful strategies to control AD.

Novel synthesis of dihydropyrimidines for α-glucosidase inhibition to treat type 2 diabetes: in vitro biological evaluation and in silico docking.

A convenient and efficient new method has been established for the synthesis of dihydropyrimidines by inexpensive and non-toxic N-acetyl glycine (NAG) catalysed reaction of aromatic aldehydes with ethyl acetoacetate and urea/thiourea. This method is applicable for various substituted aldehydes as well as urea and thiourea. It has also been used to synthesize bicyclic oxygen-bridged pyrimidine derivatives (4d, 4j).

Bioactive behavior of silicon substituted calcium phosphate based bioceramics for bone regeneration.

Bone graft substitutes are widely used for bone regeneration and repair in defect sites resulting from aging, disease, trauma, or accident. With invariably increasing clinical demands, there is an urgent need to produce artificial materials, which are readily available and are capable of fast and guided skeletal repair. Calcium phosphate based bioactive ceramics are extensively utilized in bone regeneration and repair applications.

N-(2,4,6-Trimethyl-phen-yl)-1,3-thia-zol-2-amine.

In the title compound, C(12)H(14)N(2)S, the dihedral angle between the 1,3,5-trimethyl-benzene and 1,3-thia-zol-2-amine groups is 73.15 (4)°. In the crystal, inversion dimers linked by pairs of N-H⋯N hydrogen bonds generate R(2) (2)(8) loops.

Two new ballonigrin-type diterpenoids from the roots of Ballota limbata.

Two new ballonigrin type lactone diterpenoids, named ballonigrin lactone A and B, have been isolated from the roots of Ballota limbata. Structure elucidation of the isolated compounds was based on spectroscopic {IR, 1H- and 3C-NMR, and 2D-NMR (HMQC, HMBC, COSY and NOESY} and EI-MS data.

Halogen dance reactions--a review.

Halogen Dance (HD) reactions are a useful tool for synthetic chemists as they enable access to positions in aromatic and heteroaromatic systems for subsequent functionalization which are often difficult to address by other methods, hence, allowing entry to versatile scaffolds. While the method can be extremely useful, this transformation is often neglected upon designing synthetic sequences. This may be largely attributed to the lack of comprehensive reference works covering the general principles and outlining the versatility and limitations of the technique.