Experimental Measurement and Mathematical Quantification of Fixed-Charged Density in Rat and Pig Brain Tissue.

Cerebral edema is associated with poor prognosis because brain swelling within the rigid skull raises intracranial pressure, exacerbating secondary injuries following traumatic brain injury. Brain swelling can be characterized by triphasic biomechanics, which models brain tissue as a mixture of a deformable porous solid matrix with a negative fixed-charged density (FCD), water, and monovalent counterions. When brain cells die, the intracellular FCD is exposed, attracting cations into the cells.

Effect of Blood on Synovial Joint Tissues: Potential Role of Ferroptosis.

Recurrent bleeding in the synovial joint, such as the knee, can give rise to chronic synovitis and degenerative arthritis, which are major causes of morbidity. Whereas chronic arthropathy affects one-fifth of hemophiliacs, conditions such as rheumatoid arthritis (RA), periarticular and articular fractures, osteochondral autograft transplantation surgery, and anterior cruciate ligament (ACL) injury are also associated with joint bleeding. Synovial joint trauma is associated with inflammation, acute pain, bloody joint effusion, and knee instability.

Evaluation of Dexamethasone-Eluting Cell-Seeded Constructs in a Preclinical Canine Model of Cartilage Repair.

In this 12-month long, preclinical large animal study using a canine model, we report that engineered osteochondral grafts (comprised of allogeneic chondrocyte-seeded hydrogels with the capacity for sustained release of the corticosteroid dexamethasone [DEX], cultured to functional mechanical properties, and incorporated over porous titanium bases), can successfully repair damaged cartilage. DEX release from within engineered cartilage was hypothesized to improve initial cartilage repair by modulating the local inflammatory environment, which was also associated with suppressed degenerative changes exhibited by menisci and synovium. We note that not all histological and clinical outcomes at an intermediary time point of three months paralleled 12-month outcomes, which emphasizes the importance of studies in valid preclinical models that incorporate clinically relevant follow-up durations.

Synovial fluid does not retard fluid exudation during stress-relaxation of immature bovine cartilage.

Interstitial fluid load support (FLS) is a dominant mechanism of lubrication in cartilage, producing a low friction coefficient while enhancing the tissue's load bearing capabilities. Due to its viscosity, synovial fluid (SF) may retard loss of FLS by slowing the exudation of interstitial fluid from the cartilage. This study tested this hypothesis by comparing the stress-relaxation (SRL) response of immature bovine articular cartilage immersed either in phosphate buffered saline (PBS) or in healthy mature bovine SF, under unconfined compression (fluid exudation across cut lateral tissue boundary) and indentation testing (fluid exudation across articular surface).

A major functional role of synovial fluid is to reduce the rate of cartilage fatigue failure under cyclical compressive loading.

Objective: Based on our recent study, which showed that cartilage fatigue failure in reciprocating sliding contact results from cyclical compressive forces, not from cyclical frictional forces, we hypothesize that a major functional role for synovial fluid (SF) is to reduce the rate of articular cartilage fatigue failure from cyclical compressive loading.

Design: The rate of cartilage fatigue failure due to repetitive compressive loading was measured by sliding a glass lens against an immature bovine cartilage tibial plateau strip immersed in mature bovine SF, phosphate-buffered saline (PBS), or SF/PBS dilutions (50% SF and 25% SF; n = 8 for all four bath conditions). After 24 h of reciprocating sliding (5400 cycles), samples were visually assessed, and if damage was observed, the test was terminated; otherwise, testing was continued for 72 h (16,200 cycles), with solution refreshed daily.

Synovium friction properties are influenced by proteoglycan content.

The synovium plays a crucial role in diarthrodial joint health, and its study has garnered appreciation as synovitis has been linked to osteoarthritis symptoms and progression. Quantitative synovium structure-function data, however, remain sparse. In the present study, we hypothesized that tissue glycosaminoglycan (GAG) content contributes to the low friction properties of the synovium.

The Problem With National Institute of Standards and Technology Thermodynamics Tables in Continuum Mechanics.

Thermodynamics is a fundamental topic of continuum mechanics and biomechanics, with a wide range of applications to physiological and biological processes. This study addresses two fundamental limitations of current thermodynamic treatments. First, thermodynamics tables distributed online by the U.

Erratum: "A Numerical Scheme for Anisotropic Reactive Nonlinear Viscoelasticity" [ASME J. Biomech Eng., 2023, 145(1), p. 011004; DOI: 10.1115/1.4054983].

In this erratum, we correct a mistake in a subcomponent of the numerical algorithm proposed in our recent study for modeling anisotropic reactive nonlinear viscoelasticity (doi:10.1115/1.4054983), for the special case where multiple weak bond families may be recruited with loading.

Continuum Growth Mechanics: Reconciling Two Common Frameworks.

The objective of this study was to investigate whether the two most common growth mechanics modeling frameworks, the constrained-mixture growth model and the kinematic growth model, could be reconciled mathematically. The purpose of this effort was to provide practical guidelines for potential users of these modeling frameworks. Results showed that the kinematic growth model is mathematically consistent with a special form of the constrained-mixture growth model, where only one generation of a growing solid exists at any given time, overturning its entire solid mass at each instant of growth in order to adopt the reference configuration dictated by the growth deformation.

Simulating Cerebral Edema and Ischemia After Traumatic Acute Subdural Hematoma Using Triphasic Swelling Biomechanics.

Poor outcome following traumatic acute subdural hematoma (ASDH) is associated with the severity of the primary injury and secondary injury including cerebral edema and ischemia. However, the underlying secondary injury mechanism contributing to elevated intracranial pressure (ICP) and high mortality rate remains unclear. Cerebral edema occurs in response to the exposure of the intracellular fixed charge density (FCD) after cell death, causing ICP to increase.

Region-Dependent Mechanical Properties of Human Brain Tissue Under Large Deformations Using Inverse Finite Element Modeling.

This study aims to facilitate intracranial simulation of traumatic events by determining the mechanical properties of different anatomical structures of the brain. Our experimental indentation paradigm used fresh, post-operative human tissue, which is highly advantageous in determining mechanical properties without being affected by postmortem time. This study employed an inverse finite element approach coupled with experimental indentation data to characterize mechanical properties of the human hippocampus (CA1, CA3, dentate gyrus), cortex white matter, and cortex grey matter.

Spatial Configurations of 3D Extracellular Matrix Collagen Density and Anisotropy Simultaneously Guide Angiogenesis.

Extracellular matrix (ECM) collagen density and fibril anisotropy are thought to affect the development of new vasculatures during pathologic and homeostatic angiogenesis. Computational simulation is emerging as a tool to investigate the role of matrix structural configurations on cell guidance. However, prior computational models have only considered the orientation of collagen as a model input.

Immature bovine cartilage wear is due to fatigue failure from repetitive compressive forces and not reciprocating frictional forces.

Objective: Wear of articular cartilage is not well understood. We hypothesize that cartilage wears due to fatigue failure in repetitive compression instead of reciprocating friction.

Design: This study compares reciprocating sliding of immature bovine articular cartilage against glass in two testing configurations: (1) a stationary contact area configuration (SCA), which results in static compression, interstitial fluid depressurization, and increasing friction coefficient during reciprocating sliding, and (2) a migrating contact area configuration (MCA), which maintains pressurization and low friction while producing repetitive compressive loading in addition to reciprocating sliding.

Modeling Inelastic Responses Using Constrained Reactive Mixtures.

This study reviews the progression of our research, from modeling growth theories for cartilage tissue engineering, to the formulation of constrained reactive mixture theories to model inelastic responses in any solid material, such as theories for damage mechanics, viscoelasticity, plasticity, and elasto-plastic damage. In this framework, multiple solid generations can co-exist at any given time in the mixture. The oldest generation is denoted by and is called the master generation, whose reference configuration is observable.

Finite Element Implementation of Computational Fluid Dynamics With Reactive Neutral and Charged Solute Transport in FEBio.

The objective of this study was to implement a novel fluid-solutes solver into the open-source finite element software FEBio, that extended available modeling capabilities for biological fluids and fluid-solute mixtures. Using a reactive mixture framework, this solver accommodates diffusion, convection, chemical reactions, electrical charge effects, and external body forces, without requiring stabilization methods that were deemed necessary in previous computational implementations of the convection-diffusion-reaction equation at high Peclet numbers. Verification and validation problems demonstrated the ability of this solver to produce solutions for Peclet numbers as high as 1011, spanning the range of physiological conditions for convection-dominated solute transport.

Computational study of biomechanical drivers of renal cystogenesis.

Renal cystogenesis is the pathological hallmark of autosomal dominant polycystic kidney disease, caused by PKD1 and PKD2 mutations. The formation of renal cysts is a common manifestation in ciliopathies, a group of syndromic disorders caused by mutation of proteins involved in the assembly and function of the primary cilium. Cystogenesis is caused by the derailment of the renal tubular architecture and tissue deformation that eventually leads to the impairment of kidney function.

Pulsed Electromagnetic Field Therapy and Direct Current Electric Field Modulation Promote the Migration of Fibroblast-like Synoviocytes to Accelerate Cartilage Repair In Vitro.

Articular cartilage injuries are a common source of joint pain and dysfunction. As articular cartilage is avascular, it exhibits a poor intrinsic healing capacity for self-repair. Clinically, osteochondral grafts are used to surgically restore the articular surface following injury.

Pulse wave imaging of a stenotic artery model with plaque constituents of different stiffnesses: Experimental demonstration in phantoms and fluid-structure interaction simulation.

Vulnerable plaques associated with softer components may rupture, releasing thrombotic emboli to smaller vessels in the brain, thus causing an ischemic stroke. Pulse Wave Imaging (PWI) is an ultrasound-based method that allows for pulse wave visualization while the regional pulse wave velocity (PWV) is mapped along the arterial wall to infer the underlying wall compliance. One potential application of PWI is the non-invasive estimation of plaque's mechanical properties for investigating its vulnerability.

Damage Mechanics of Biological Tissues in Relation to Viscoelasticity.

This study examines the theoretical foundations for the damage mechanics of biological tissues in relation to viscoelasticity. Its primary goal is to provide a mechanistic understanding of well-known experimental observations in biomechanics, which show that the ultimate tensile strength of viscoelastic biological tissues typically increases with increasing strain rate. The basic premise of this framework is that tissue damage occurs when strong bonds, such as covalent bonds in the solid matrix of a biological tissue, break in response to loading.

Superficial zone chondrocytes can get compacted under physiological loading: A multiscale finite element analysis.

Recent in vivo and in vitro studies have demonstrated that superficial zone (SZ) chondrocytes within articular layers of diarthrodial joints die under normal physiologic loading conditions. In order to further explore the implications of this observation in future investigations, we first needed to understand the mechanical environment of SZ chondrocytes that might cause them to die under physiological sliding contact conditions. In this study we performed a multiscale finite element analysis of articular contact to track the temporal evolution of a SZ chondrocyte's interstitial fluid pressure, hydraulic permeability, and volume under physiologic loading conditions.

Bendable osteochondral allografts for patellar resurfacing: A finite element analysis of congruence.

Osteochondral allograft (OCA) transplantation provides a safe and effective treatment option for large cartilage defects, but its use is limited partly due to the difficulty of matching articular surface curvature between donor and recipient. We hypothesize that bendable OCAs may provide better curvature matching for patella transplants in the patellofemoral joint (PFJ). This finite element study investigates PFJ congruence for unbent and bendable OCAs, at various flexion angles.

A Numerical Scheme for Anisotropic Reactive Nonlinear Viscoelasticity.

Reactive viscoelasticity is a theoretical framework based on the theory of reactive constrained mixtures that encompasses nonlinear viscoelastic responses. It models a viscoelastic solid as a mixture of strong and weak bonds that maintain the cohesiveness of the molecular constituents of the solid matter. Strong bonds impart the elastic response while weak bonds break and reform into a stress-free state in response to loading.