Carbon dioxide-activated mesoporous date palm fronds carbon integrated with MnO/polyaniline for highly efficient capacitive deionization of water.

The continuous population growth and drying up the freshwater reservoirs around the world are increasing the demand for fresh water. Therefore, there is an urgent need to explore newer technologies able to purify water on large scales for human usage. Capacitive deionization is one of the most promising approaches to generate fresh water by the removal of salt ions from brackish water.

Enhancing the Photocatalytic Degradation of Methylene Blue with Graphene Oxide-Encapsulated g-CN/ZnO Ternary Composites.

Methylene blue (MB) is a toxic contaminant present in wastewater. Here, we prepared various composites of graphene oxide (GO) with graphitic carbon nitride (g-CN) and zinc oxide (ZnO) for the degradation of MB. In comparison to ZnO (22.

A critical review in recent progress of hollow fiber membrane contactors for efficient CO separations.

Among wide range of membrane-based operations, membrane contactors, as they reify comparatively modern membrane-based mechanism are gaining quite an attention in both pilot and industrial scales. In recent literature, carbon capture is one of the most researched applications of membrane contactors. Membrane contactors have the potential to minimize the energy consumption and capital cost of traditional CO absorptions columns.

Semiconductor Nanomaterial Photocatalysts for Water-Splitting Hydrogen Production: The Holy Grail of Converting Solar Energy to Fuel.

Nanomaterials have attracted attention for application in photocatalytic hydrogen production because of their beneficial properties such as high specific surface area, attractive morphology, and high light absorption. Furthermore, hydrogen is a clean and green source of energy that may help to resolve the existing energy crisis and increasing environmental pollution caused by the consumption of fossil fuels. Among various hydrogen production methods, photocatalytic water splitting is most significant because it utilizes solar light, a freely available energy source throughout the world, activated via semiconductor nanomaterial catalysts.

MoS-Cu/CuO@graphene Heterogeneous Photocatalysis for Enhanced Photocatalytic Degradation of MB from Water.

The industrial revolution resulted in the contamination of natural water resources. Therefore, it is necessary to save and recover the natural water resources. In this regard, polymer-based composites have attracted the scientific community for their application in wastewater treatment.

Freestanding Activated Carbon Nanocomposite Electrodes for Capacitive Deionization of Water.

Freshwater reserves are being polluted every day due to the industrial revolution. Man-made activities have adverse effects upon the ecosystem. It is thus the hour of need to explore newer technologies to save and purify water for the growing human population.

Challenges, Opportunities and Future Directions of Membrane Technology for Natural Gas Purification: A Critical Review.

Natural gas is an important and fast-growing energy resource in the world and its purification is important in order to reduce environmental hazards and to meet the required quality standards set down by notable pipeline transmission, as well as distribution companies. Therefore, membrane technology has received great attention as it is considered an attractive option for the purification of natural gas in order to remove impurities such as carbon dioxide (CO) and hydrogen sulphide (HS) to meet the usage and transportation requirements. It is also recognized as an appealing alternative to other natural gas purification technologies such as adsorption and cryogenic processes due to its low cost, low energy requirement, easy membrane fabrication process and less requirement for supervision.

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum.

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.

Development and Mechanistic Studies of Ternary Nanocomposites for Hydrogen Production from Water Splitting to Yield Sustainable/Green Energy and Environmental Remediation.

Photocatalysts lead vitally to water purifications and decarbonise environment each by wastewater treatment and hydrogen (H2) production as a renewable energy source from water-photolysis. This work deals with the photocatalytic degradation of ciprofloxacin (CIP) and H2 production by novel silver-nanoparticle (AgNPs) based ternary-nanocomposites of thiolated reduce-graphene oxide graphitic carbon nitride (AgNPs-S-rGO2%@g-C3N4) material. Herein, the optimised balanced ratio of thiolated reduce-graphene oxide in prepared ternary-nanocomposites played matchlessly to enhance activity by increasing the charge carriers’ movements via slowing down charge-recombination ratios.

Prewetting Induced Hydrophilicity to Augment Photocatalytic Activity of Nanocalcite @ Polyester Fabric.

To eliminate imidacloprid insecticide from wastewater, nanocalcite was grafted onto the surface of pretreated polyester fabric. The process of seeding was followed by the low temperature hydrothermal method for the growth of nanocalcite for the functionalization of fabric. The goal of this study was to improve the hydrophilicity of the nanocalcite photocatalyst that had been grafted onto the surface of polyester fabric (PF) using acidic and basic prewetting techniques.

Enhanced Solar Photocatalytic Reduction of Cr(VI) Using a (ZnO/CuO) Nanocomposite Grafted onto a Polyester Membrane for Wastewater Treatment.

Among chemical water pollutants, Cr(VI) is a highly toxic heavy metal; solar photocatalysis is a cost-effective method to reduce Cr(VI) to innocuous Cr(III). In this research work, an efficient and economically feasible ZnO/CuO nanocomposite was grafted onto the polyester fabric ZnO/CuO/PF through the SILAR method. Characterization by SEM, EDX, XRD, and DRS confirmed the successful grafting of highly crystalline, solar active nanoflakes of ZnO/CuO nanocomposite onto the polyester fabric.

Fabrication of High Performance PVDF Hollow Fiber Membrane Using Less Toxic Solvent at Different Additive Loading and Air Gap.

Existing toxic solvents in the manufacturing of polymeric membranes have been raising concerns due to the risks of exposure to health and the environment. Furthermore, the lower tensile strength of the membrane renders these membranes unable to endure greater pressure during water treatment. To sustain a healthier ecosystem, fabrication of polyvinylidene fluoride (PVDF) hollow fiber membrane using a less toxic solvent, triethyl phosphate (TEP), with a lower molecular weight polyethylene glycol (PEG 400) (0-3 wt.

Coal fly ash supported CoFeO nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue.

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFeO) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFeO) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison.

Effective Removal of Cr(VI) from Wastewater Using Biochar Derived from Walnut Shell.

Heavy metals are the major concern of the modern age. Among the heavy metals, chromium (Cr(VI)) is regarded as a highly toxic heavy metal released largely from leather tanning operations. To remove such high concentrations of Cr(VI), an advanced method is required urgently.

Mixed metal ferrite (MnZnFeO) intercalated g-CNnanocomposite: efficient sunlight driven photocatalyst for methylene blue degradation.

Visible active mixed metal ferrite intercalated semiconductor photocatalyst MnZnFeO/g-CNwas prepared via facile hydrothermal and liquid assembly method for methylene blue (MB) dye degradation. The prepared samples were well characterized in term of their functional groups, crystallinity, elemental analysis, surface morphology using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, energy dispersive x-ray, and scanning electron microscopy, respectively. The optical response of catalysts was checked by estimating the energy band gap () of semiconductor photocatalysts using UV-vis spectroscopy.

Immobilization techniques of a photocatalyst into and onto a polymer membrane for photocatalytic activity.

This article reviews the various techniques of immobilizing a photocatalyst into and onto the polymer membrane for pollutant removal and as a problem solver in handling suspended photocatalyst issues from the previous literature. A particular focus is given to the preparation of mixed matrix membranes and deposition techniques for photocatalytic degradation in applications for wastewater treatment. Advantages and disadvantages in this application are evaluated.

Degradation of acetamiprid using graphene-oxide-based metal (Mn and Ni) ferrites as Fenton-like photocatalysts.

This study aims to explore the photocatalytic potential of graphene-oxide-based metal ferrites for the degradation of acetamiprid (an odorless neonicotinoid pesticide). Metal (Mn and Ni) ferrites (along with their graphene oxide composites) were prepared by the hydrothermal method while graphene oxide (GO) was synthesized using a modified Hummer's method. The composites were characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy.

High sorption efficiency for As(III) and As(V) from aqueous solutions using novel almond shell biochar.

Arsenic (As) presence in surface reservoirs and groundwater is considered as an extremely alarming issue around the globe. The objectives of the present study were to evaluate the sorption potential of almond shell (ALS) and almond shell biochar (ASB) based sorbents for the removal of As(III)/As(V) from As-contaminated aqueous solutions. The maximum As(III) sorption capacity of ALS and ASB were 4.

Magnetic Hierarchically Macroporous Emulsion-Templated Poly(acrylic acid)-Iron Oxide Nanocomposite Beads for Water Remediation.

Tainting of waterbodies with noxious industrial waste is the gravest environmental concern of the day that continues to wreak inevitable havoc on human health. To cleanup these hard-to-remove life-threatening water contaminants, we have prepared hierarchically porous poly(acrylic acid) beads by emulsion templating. These emulsion-templated macroporous polymer beads not only mediate the synthesis of FeO nanoparticles inside their porous network using a coprecipitation approach but, in turn, create diverse anchoring sites to immobilize an additional poly(acrylic acid) active layer onto the nanocomposite beads.

Comparative efficiency of peanut shell and peanut shell biochar for removal of arsenic from water.

Contamination of surface water and groundwater streams with carcinogenic chemicals such as arsenic (As) has been a major environmental issue worldwide, and requires significant attention to develop new and low-cost sorbents to treat As-polluted water. In the current study, arsenite (As(III)) and arsenate (As(V)) removal efficiency of peanut shell biochar (PSB) was compared with peanut shell (PS) in aqueous solutions. Sorption experiments showed that PSB possessed relatively higher As removal efficiency than PS, with 95% As(III) (at pH 7.

Combination of Mesenchymal Stem Cells, Cartilage Pellet and Bioscaffold Supported Cartilage Regeneration of a Full Thickness Articular Surface Defect in Rabbits.

Background: Mesenchymal stem cells (MSCs) and/or biological scaffolds have been used to regenerate articular cartilage with variable success. In the present study we evaluated cartilage regeneration using a combination of bone marrow (BM)-MSCs, Hyalofast and/or native cartilage tissue following full thickness surgical cartilage defect in rabbits.

Methods: Full-thickness surgical ablation of the medial-tibial cartilage was performed in New Zealand white (NZW) rabbits.

Facile Synthesis of Ternary Alloy of CdSeS Quantum Dots with Tunable Absorption and Emission of Visible Light.

The synthesis of alloyed semiconductor quantum dots has produced structures that have distinct properties in comparison with both their bulk counterparts and their parent binary semiconductor quantum dots. In this work, the quantum confined structures of a ternary alloy of CdSeS were synthesized by one-pot synthesis method in an aqueous medium at a low temperature and capped with 3-mercaptopropoionic acid. Structures of the synthesized quantum dots were investigated by energy dispersive X-ray, X-ray diffraction, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy.

Development of Silver-Nanoparticle-Decorated Emulsion-Templated Hierarchically Porous Poly(1-vinylimidazole) Beads for Water Treatment.

Water, the driver of nature, has always been polluted by the blind hurling of highly toxic contaminants, but human-friendly science has continuously been presenting better avenues to help solve these challenging issues. In this connection, the present study introduces novel nanocomposites composed of emulsion-templated hierarchically porous poly(1-vinylimidazole) beads loaded with the silver nanoparticles generated via an in situ approach. These nanocomposites have been thoroughly characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller, and field emission scanning electron microscopy.