Plasmonic nanohole array for enhancing the SERS signal of a single layer of graphene in water.

We numerically design and experimentally test a SERS-active substrate for enhancing the SERS signal of a single layer of graphene (SLG) in water. The SLG is placed on top of an array of silver-covered nanoholes in a polymer and is covered with water. Here we report a large enhancement of up to 2 × 10 in the SERS signal of the SLG on the patterned plasmonic nanostructure for a 532 nm excitation laser wavelength.

High-Gain Graphene Transistors with a Thin AlOx Top-Gate Oxide.

The high-frequency performance of transistors is usually assessed by speed and gain figures of merit, such as the maximum oscillation frequency f , cutoff frequency f , ratio f /f , forward transmission coefficient S , and open-circuit voltage gain A . All these figures of merit must be as large as possible for transistors to be useful in practical electronics applications. Here we demonstrate high-performance graphene field-effect transistors (GFETs) with a thin AlOx gate dielectric which outperform previous state-of-the-art GFETs: we obtained f /f  > 3, A  > 30 dB, and S  = 12.

Scaling of graphene integrated circuits.

The influence of transistor size reduction (scaling) on the speed of realistic multi-stage integrated circuits (ICs) represents the main performance metric of a given transistor technology. Despite extensive interest in graphene electronics, scaling efforts have so far focused on individual transistors rather than multi-stage ICs. Here we study the scaling of graphene ICs based on transistors from 3.

Annealing free, clean graphene transfer using alternative polymer scaffolds.

We examine the transfer of graphene grown by chemical vapor deposition (CVD) with polymer scaffolds of poly(methyl methacrylate) (PMMA), poly(lactic acid) (PLA), poly(phthalaldehyde) (PPA), and poly(bisphenol A carbonate) (PC). We find that optimally reactive PC scaffolds provide the cleanest graphene transfers without any annealing, after extensive comparison with optical microscopy, x-ray photoelectron spectroscopy, atomic force microscopy, and scanning tunneling microscopy. Comparatively, films transferred with PLA, PPA, PMMA/PC, and PMMA have a two-fold higher roughness and a five-fold higher chemical doping.

High field breakdown characteristics of carbon nanotube thin film transistors.

The high field properties of carbon nanotube (CNT) network thin film transistors (CN-TFTs) are important for their practical operation, and for understanding their reliability. Using a combination of experimental and computational techniques we show how the channel geometry (length L(C) and width W(C)) and network morphology (average CNT length L(t) and alignment angle distribution θ) affect heat dissipation and high field breakdown in such devices. The results suggest that when WC ≥ L(t), the breakdown voltage remains independent of W(C) but varies linearly with L(C).

Gigahertz integrated graphene ring oscillators.

Ring oscillators (ROs) are the most important class of circuits used to evaluate the performance limits of any digital technology. However, ROs based on low-dimensional nanomaterials (e.g.

In(x)Ga(1-x)As nanowire growth on graphene: van der Waals epitaxy induced phase segregation.

The growth of high-density arrays of vertically oriented, single crystalline InAs NWs on graphene surfaces are realized through the van der Waals (vdW) epitaxy mechanism by metalorganic chemical vapor deposition (MOCVD). However, the growth of InGaAs NWs on graphene results in spontaneous phase separation starting from the beginning of growth, yielding a well-defined InAs-In(x)Ga(1-x)As (0.2 < x < 1) core-shell structure.

High-field electrical and thermal transport in suspended graphene.

We study the intrinsic transport properties of suspended graphene devices at high fields (≥1 V/μm) and high temperatures (≥1000 K). Across 15 samples, we find peak (average) saturation velocity of 3.6 × 10(7) cm/s (1.

High-field transport and thermal reliability of sorted carbon nanotube network devices.

We examine the high-field operation, power dissipation, and thermal reliability of sorted carbon nanotube network (CNN) devices, with <1% to >99% semiconducting nanotubes. We combine systematic electrical measurements with infrared (IR) thermal imaging and detailed Monte Carlo simulations to study high-field transport up to CNN failure by unzipping-like breakdown. We find that metallic CNNs carry peak current densities up to an order of magnitude greater than semiconducting CNNs at comparable nanotube densities.

Self-aligned nanotube-nanowire phase change memory.

A central issue of nanoelectronics concerns their fundamental scaling limits, that is, the smallest and most energy-efficient devices that can function reliably. Unlike charge-based electronics that are prone to leakage at nanoscale dimensions, memory devices based on phase change materials (PCMs) are more scalable, storing digital information as the crystalline or amorphous state of a material. Here, we describe a novel approach to self-align PCM nanowires with individual carbon nanotube (CNT) electrodes for the first time.

Transport in nanoribbon interconnects obtained from graphene grown by chemical vapor deposition.

We study graphene nanoribbon (GNR) interconnects obtained from graphene grown by chemical vapor deposition (CVD). We report low- and high-field electrical measurements over a wide temperature range, from 1.7 to 900 K.

Cascading wafer-scale integrated graphene complementary inverters under ambient conditions.

The fundamental building blocks of digital electronics are logic gates which must be capable of cascading such that more complex logic functions can be realized. Here we demonstrate integrated graphene complementary inverters which operate with the same input and output voltage logic levels, thus allowing cascading. We obtain signal matching under ambient conditions with inverters fabricated from wafer-scale graphene grown by chemical vapor deposition (CVD).

Electronic transport in graphitic nanoribbon films.

We fabricate, pattern, and analyze thin films composed of multilayer graphene nanoribbons. These films are conductive at room temperature but depict noticeable insulating behavior at low temperatures (<20 K) due to their disordered structure. We study the transport in this strong localization regime by analyzing the dependence of resistivity on temperature and electric and magnetic fields in the framework of the variable range hopping theory.

Resistivity in percolation networks of one-dimensional elements with a length distribution.

One-dimensional (1D) nanoelements, such as nanotubes and nanowires, making up percolation networks are typically modeled as fixed length sticks in order to calculate their electrical properties. In reality, however, the lengths of these 1D nanoelements comprising such networks are not constant, rather they exhibit a length distribution. Using Monte Carlo simulations, we have studied the effect of this nanotube and/or nanowire length distribution on the resistivity in 1D nanoelement percolation networks.