Hybrid Ni-Boron Nitride Nanotube Magnetic Semiconductor-A New Material for Spintronics.

Here, we report the presence of ferromagnetism in hybrid nickel-boron nitride nanotubes (BNNTs) with an ordered structure, synthesized by chemical vapor deposition using elemental boron, nickel oxide as the catalyst, and ammonia gas as the source for nitrogen. In previous studies, the nanotubes were synthesized with two metal oxide catalysts, whereas here, only a single catalyst was used. The nanotube's structure was determined by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy.

Facile Synthesis of Mesoporous Carbon Spheres Using 3D Cubic Fe-KIT-6 by CVD Technique for the Application of Active Electrode Materials in Supercapacitors.

Mesoporous carbon spheres (MCS-750, MCS-800, MCS-850, MCS-900, and MCS-950) have been synthesized by a facile strategy with low temperature and rapid chemical vapor deposition technique. The synthesized MCS possess relatively large surface area (570-670 m g), good graphitization, remarkable porosity, and redox functionalities on the surface of the synthesized MCS. Combination of these structural and surface properties of the synthesized MCS as an electrode material (MCS-850) showed an excellent charge-storage capacity with a specific capacitance of 338 F/g at 1 mV/s, 217 F/g at 0.

Effects of Nanofillers on the Thermo-Mechanical Properties and Chemical Resistivity of Epoxy Nanocomposites.

MWCNTs was synthesized using Ni-Cr/MgO by CVD method and were purified. The purified MWCNT was used as a filler material for the fabrication of epoxy nanocomposites. The epoxy nanocomposites with different amount (wt% = 0.

Facile synthesis of high quality multi-walled carbon nanotubes on novel 3D KIT-6: application in high performance dye-sensitized solar cells.

A novel hard templating strategy for the synthesis of high quality multi-walled carbon nanotubes (MWCNTs) with a uniform diameter was developed. MWCNTs were successfully synthesized through chemical vapour deposition (CVD) using acetylene by employing 3D bicontinuous mesoporous silica (KIT-6) as a hard template and used as the counter electrode in dye-sensitized solar cells (DSSCs). Here, we report that Ni-Cr-KIT-6 and Co-Cr-KIT-6 systems are the most suitable catalysts for the growth of MWCNTs.

Highly ordered molecular films on Au(111): the N-heteroacene approach.

This study presents an innovative synthesis of dihydrotetraazapentacene (DHTAP) and the scanning tunneling microscopy (STM) investigation of the initial stages of its growth on Au(111). We were able to demonstrate that, up to the fourth monolayer, the DHTAP films show a high structural order and growths in perfect epitaxy. This behavior can be unequivocally attributed to the stabilizing effect of intralayer hydrogen bonding interactions.

Low temperature growth of double walled carbon nanotubes using FeMoMgO catalyst.

The chemical vapour deposition technique was utilised to grow the double walled carbon nanotubes (DWCNTs) over FeMoMgO catalyst at low temperature (550 degrees C) under the mixture of argon, hydrogen and acetylene gas. Thermogravimetric analysis revealed that synthesised nanotubes have thermal stability and high purity. The high-resolution transmission electron microscopy image showed the formation of DWCNTs with tube diameter of 2.

Extended vapor-liquid-solid growth of silicon carbide nanowires.

We developed an alloy catalytic method to explain extended vapor-liquid-solid (VLS) growth of silicon carbide nanowires (SiC NWs) by a simple thermal evaporation of silicon and activated carbon mixture using lanthanum nickel (LaNi5) alloy as catalyst in a chemical vapor deposition process. The LaNi5 alloy binary phase diagram and the phase relationships in the La-Ni-Si ternary system were play a key role to determine the growth parameters in this VLS mechanism. Different reaction temperatures (1300, 1350 and 1400 degrees C) were applied to prove the established growth process by experimentally.

Effect of MoO3 on the synthesis of boron nitride nanotubes over Fe and Ni catalysts.

Synthesis of boron nitride nanotubes at reduced temperature is important for industrial manufactures. In this study boron nitride nanotubes were synthesized by thermal evaporation method using B/Fe2O3/MoO3 and B/Ni2O3/MoO3 mixtures separately with ammonia as the nitrogen source. The growth of boron nitride nanotubes occurred at 1100 degrees C, which was relatively lower than other metal oxides assisted growth processes requiring higher than 1200 degrees C.

Synthesis and characterization of Mn-MCM-41--its catalytic activity for the synthesis of carbon nanotubes.

Mn-MCM-41 was synthesized in various (Si/Mn = 25, 50, 75 and 100) ratios, using manganese acetate as source for manganese by hydrothermal method and was calcined at 550 degrees C for 6 hrs. The physico-chemical characterizations of Mn-MCM-41 showed the formation of hexagonally arranged mesopores with high surface area. The calcined Mn-MCM-41 was used as catalytic templates for the growth of large amount of carbon nanotubes.

Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: an adsorption process.

The presence of citric acid in decontamination waste can cause complexation of the radioactive cations resulting in interferences in their removal by various treatment processes such as chemical precipitation, ion-exchange, etc., which are employed for the removal of radioactivity and may cause potential danger to the environment. Mesoporous Al-MCM-41 (Si/Al=30, 51, 72 and 97) and Si-MCM-41 molecular sieves were synthesized hydrothermally and characterized by XRD, BET (surface area) and FT-IR to evaluate the removal of citric acid through an adsorption process.