Proton Accumulation Modulated Surface Potential in Proton Conducting Ceramics Revealed by Near-Ambient Pressure X-ray Photoelectron Spectroscopy.

Proton conducting electrochemical cells (PCECs) are efficient and clean intermediate-temperature energy conversion devices. The proton concentration across the PCECs is often nonuniform, and characterizing the distribution of proton concentration can help to locate the position of rate-limiting reactions. However, the determination of the local proton concentration under operating conditions remains challenging.

Fluorescence and electron transfer of Limnospira indica functionalized biophotoelectrodes.

Cyanobacteria play a crucial role in global carbon and nitrogen cycles through photosynthesis, making them valuable subjects for understanding the factors influencing their light utilization efficiency. Photosynthetic microorganisms offer a promising avenue for sustainable energy conversion in the field of photovoltaics. It was demonstrated before that application of an external electric field to the microbial biofilm or cell improves electron transfer kinetics and, consequently, efficiency of power generation.

Electric Polarization-Dependent Absorption and Photocurrent Generation in Immobilized on Boron-Doped Diamond.

We present the change of light absorption of cyanobacteria in response to externally applied electrical polarization. Specifically, we studied the relation between electrical polarization and changes in light absorbance for a biophotoelectrode assembly comprising boron-doped diamond as semiconducting electrode and live PCC 8005 trichomes embedded in either polysaccharide (agar) or conductive conjugated polymer (PEDOT-PSS) matrices. Our study involves the monitoring of cyanobacterial absorbance and the measurement of photocurrents at varying wavelengths of illumination for switched electric fields, i.

Entropy and Isokinetic Temperature in Fast Ion Transport.

Ion transport in crystalline solids is an essential process for many electrochemical energy converters such as solid-state batteries and fuel cells. Empirical data have shown that ion transport in crystal lattices obeys the Meyer-Neldel Rule (MNR). For similar, closely related materials, when the material properties are changed by doping or by strain, the measured ionic conductivities showing different activation energies intersect on the Arrhenius plot, at an isokinetic temperature.

The Role of Strain in Proton Conduction in Multi-Oriented BaZrYO Thin Film.

Within the emerging field of proton-conducting fuel cells, BaZrYO (BZY10) is an attractive material due to its high conductivity and stability. The fundamentals of conduction in sintered pellets and thin films heterostructures have been explored in several studies; however, the role of crystallographic orientation, grains, and grain boundaries is poorly understood for proton conduction. This article reports proton conduction in a self-assembled multi-oriented BZY10 thin film grown on top of a (110) NdGaO substrate.

Defect Engineering To Tailor Metal Vacancies in 2D Conductive Metal-Organic Frameworks: An Example in Electrochemical Sensing.

Two-dimensional conductive metal-organic frameworks (2D conductive MOFs) with π-d conjugations exhibit high electrical conductivity and diverse coordination structures, making them constitute a desirable platform for new electronic devices. Defects are inevitable in the self-assembly process of 2D conductive MOFs. Arguably, defect engineering that deliberately manipulates defects demonstrates great potential to enhance the electrocatalytic activity of this family of novel materials.

Aerosol-Assisted Deposition for TiO Immobilization on Photocatalytic Fibrous Filters for VOC Degradation.

Atomization and spraying are well-established methods for the production of submicrometer- and micrometer- sized powders. In addition, they could be of interest to the immobilization of photocatalytic nanoparticles onto supports because they enable the formation of microporous films with photocatalytic activity. Here, we provide a comparison of aerosol-assisted immobilization methods, such as spray-drying (SD), spray atomization (SA), and spray gun (SG), which were used for the deposition of TiO dispersions onto fibrous filter media.

Nuclear Resonance Vibrational Spectroscopy: A Modern Tool to Pinpoint Site-Specific Cooperative Processes.

Nuclear resonant vibrational spectroscopy (NRVS) is a synchrotron radiation (SR)-based nuclear inelastic scattering spectroscopy that measures the phonons (i.e., vibrational modes) associated with the nuclear transition.

From inert gas to fertilizer, fuel and fine chemicals: N reduction and fixation.

The 100th anniversary of a leading nitrogen fixation technology developer like CASALE SA is a reason to reflect over the 20th century successful solution of the problem of world food supply, and to look out for solutions for sustainable developments with respect to ammonia production. We review the role of nitrogen as essential chemical constituent in photosynthesis and biology, and component of ammonia as it is used as fertilizer for primary production by photosynthesis for farming and food supply and its future role as energy carrier. While novel synthesis methods and very advanced synchrotron based x-ray analytical techniques are being developed, we feel it is important to refer to the historical and economical context of nitrogen.

Observation of Potential-Induced Hydration on the Surface of Ceramic Proton Conductors Using Near-Ambient Pressure X-ray Photoelectron Spectroscopy.

Interactions of ceramic proton conductors with the environment under operating conditions play an essential role on material properties and device performance. It remains unclear how the chemical environment of material, as modulated by the operating condition, affects the proton conductivity. Combining near-ambient pressure X-ray photoelectron spectroscopy and impedance spectroscopy, we investigate the chemical environment changes of oxygen and the conductivity of BaZrYO under operating condition.

Covalent SO Bonding Enables Enhanced Photoelectrochemical Performance of Cu S/Fe O Heterojunction for Water Splitting.

The severe charge recombination and the sluggish kinetic for oxygen evolution reaction have largely limited the application of hematite (α-Fe O ) for water splitting. Herein, the construction of Cu S/Fe O heterojunction and discover that the formation of covalent SO bonds between Cu S and Fe O can significantly improve the photoelectrochemical performance and stability for water splitting is reported. Compared with bare Fe O , the heterostructure of Cu S/Fe O endows the resulting electrode with enhanced charge separation and transfer, extended range for light absorption, and reduced charge recombination rate.

Study on crystallographic and electronic structure of micrometre-scale ZnO and ZnO:B rods via X-ray absorption fine-structure spectroscopy.

X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine-structure (EXAFS) spectra were recorded to investigate the electronic structure and local crystal structure of ZnO and ZnO:B powders produced via hydrothermal synthesis. ZnO and ZnO:B grow as micrometre-scale rods with hexagonal shape, as confirmed by scanning electron microscopy micrographs. The number of broken ZnO:B rods increases with increasing B concentration, as observed in the images, due to B atoms locating in between the Zn and O atoms which weakens and/or breaks the Zn-O bonds.

Swiss Stakeholder Workshop for the SUNRISE H2020 FET-Flagship Project.

On 27 September 2019, a workshop for the Swiss stakeholders for the SUNRISE flagship project was held at Empa in Dübendorf. The workshop had the aim of community building and was attended by over 30 participants from Switzerland, France, and South Africa. The secondary purpose of the workshop was the inclusion of the previously competing ENERGY-X flagship project into a future joint project from SUNRISE and ENERGY-X.

Hole and Protonic Polarons in Perovskites.

Electric charge transport is an essential process for all electrical and electrochemical energy systems, including inanimate and animate matter. In this issue on materials for energy conversion, we compare and discuss the role of electron holes and protons as charge carriers in solids. Specifically we outline how the temperature or thermal bath affect the charge carrier concentration and mobility for some metal oxides with the perovskite structure.

Experimental neutron scattering evidence for proton polaron in hydrated metal oxide proton conductors.

Hydration of oxygen-deficient metal oxides causes filling of oxygen vacancies and formation of hydroxyl groups with interstitial structural protons, rotating around the oxygen in localized motion. Thermal activation from 500 to 800 K triggers delocalization of the protons by jumping to adjacent oxygen ions, constituting proton conductivity. We report quantitative analyses of proton and lattice dynamics by neutron-scattering data, which reveal the interaction of protons with the crystal lattice and proton-phonon coupling.

Probing the mystery of Liesegang band formation: revealing the origin of self-organized dual-frequency micro and nanoparticle arrays.

Periodic precipitation processes in gels can result in impressive micro- and nanostructured patterns known as periodic precipitation (or Liesegang bands). Under certain conditions, the silver nitrate-chromium(vi) system exhibits the coexistence of two kinds of Liesegang bands with different frequencies. We now present that the two kinds of bands form independently on different time scales and the pH-dependent chromate(vi)-dichromate(vi) equilibrium controls the formation of the precipitates.

A self-assembled, multicomponent water oxidation device.

Langmuir-Blodgett (LB) and drop-cast (DC) films prepared from [Ru(1)3][PF6]2 and Co4POM (1= 4,4'-bis((n)nonyl)-2,2'-bipyridine, Co4POM = K10[Co4(H2O)2(α-PW9O34)2]) have been evaluated as water oxidation catalysts and their electrocatalytic performances are reported; DC films evolve more O2 per unit area than LB films and the catalyst is stable on an FTO surface for ≈500-600 minutes.

Electronic structure origin of conductivity and oxygen reduction activity changes in low-level Cr-substituted (La,Sr)MnO3.

The electronic structure of the (La(0.8)Sr(0.2))(0.

Just for us?

It is a regrettable decision by Karlsruhe Institute of Technology that ANKA, the Angströmquelle Karlsruhe, is terminating its external synchrotron user support program. ANKA has an excellent performance review grading sheet and has been a valuable source and resource to international users for over a decade. There is concern among users that ANKA's decision could become an example for other synchrotrons as well.

Advanced and In Situ Analytical Methods for Solar Fuel Materials.

In situ and operando techniques can play important roles in the development of better performing photoelectrodes, photocatalysts, and electrocatalysts by helping to elucidate crucial intermediates and mechanistic steps. The development of high throughput screening methods has also accelerated the evaluation of relevant photoelectrochemical and electrochemical properties for new solar fuel materials. In this chapter, several in situ and high throughput characterization tools are discussed in detail along with their impact on our understanding of solar fuel materials.

Growth of nanoparticles and microparticles by controlled reaction-diffusion processes.

The synthesis of different sizes of nanoparticles and microparticles is important in designing nanostructured materials with various properties. Wet synthesis methods lack the flexibility to create various sizes of particles (particle libraries) using fixed conditions without the repetition of the steps in the method with a new set of parameters. Here, we report a synthesis method based on nucleation and particle growth in the wake of a moving chemical front in a gel matrix.

Biological components and bioelectronic interfaces of water splitting photoelectrodes for solar hydrogen production.

Artificial photosynthesis (AP) is inspired by photosynthesis in nature. In AP, solar hydrogen can be produced by water splitting in photoelectrochemical cells (PEC). The necessary photoelectrodes are inorganic semiconductors.

Maze solving using fatty acid chemistry.

This study demonstrates that the Marangoni flow in a channel network can solve maze problems such as exploring and visualizing the shortest path and finding all possible solutions in a parallel fashion. The Marangoni flow is generated by the pH gradient in a maze filled with an alkaline solution of a fatty acid by introducing a hydrogel block soaked with an acid at the exit. The pH gradient changes the protonation rate of fatty acid molecules, which translates into the surface tension gradient at the liquid-air interface through the maze.

Light harvesting proteins for solar fuel generation in bioengineered photoelectrochemical cells.

The sun is the primary energy source of our planet and potentially can supply all societies with more than just their basic energy needs. Demand of electric energy can be satisfied with photovoltaics, however the global demand for fuels is even higher. The direct way to produce the solar fuel hydrogen is by water splitting in photoelectrochemical (PEC) cells, an artificial mimic of photosynthesis.

Hematite-NiO/α-Ni(OH)2 heterostructure photoanodes with high electrocatalytic current density and charge storage capacity.

Control of the water splitting reaction in the context of natural photosynthesis is considered as a Holy Grail of chemistry, particularly with respect to artificial photosynthesis for a sustainable energy economy. The underlying objective is to build a solar fuel generator which is economically viable and environmentally benign. Hydrogen generation by solar water splitting in photoelectrochemical cells (PEC) is currently experiencing a renaissance, and the search for high performance but low-cost photoelectrode materials is an on-going quest.