The co-production of xylose, fermentable glucose and β-O-4 linkage-rich lignin through efficiently dismantling sugarcane bagasse.

As an "upstream" process in biorefinery, biomass dismantling can dismantle the natural stable structure of lignocellulosic biomass and separate its three major components. To increase the value of the entire biomass by fully utilizing the three main components (cellulose, lignin, and hemicellulose), this study proposes a two-step decomposition system combining formic acid (FA) pretreatment and ethylene glycol-NaOH (EGA) dismantling, aiming to effectively convert sugarcane bagasse into xylose, fermentable glucose, and high-value lignin. In the first step, FA pretreatment removed 79.

Membrane Separations in Biomass Processing.

The development of integrated biorefineries and the greater utilization of biomass resources to reduce dependence on fossil fuel-derived products require research emphasis not just on conversion strategies but also on improving separations associated with biorefining. A significant roadblock towards developing biorefineries is the lack of effective separation techniques evidenced by the relative deficiency of literature in this area. Additionally, high conversion yields may only be realized if effective separations generate feedstock of sufficient purity - this makes research into biomass conversion strategies all the more critical.

Establishment of efficient system for bagasse bargaining: Combining fractionation of saccharides, recycling of high-viscosity solvent and dismantling.

Sugarcane bagasse (SCB) has a recalcitrant structure, which hinders its component dismantling and subsequent high value utilization. Some organic solvents are favorable to dismantle lignocellulose, but their high viscosity prevents separation of components and reuse of solvents. Herein, ethylene glycol phenyl ether (EGPE)-acid system is used as an example to develop green and efficient methods to dismantle SCB, purify polysaccharides and lignin, and reuse solvents.

Visualization of lignification in flax stem cell walls with novel click-compatible monolignol analogs.

Introduction: As an essential part of plant cell walls, lignin provides mechanical support for plant growth, enhances water transport, and helps to defend against pathogens. As the most abundant natural aromatic-based renewable resource on earth, its biosynthesis has always been a research focus, and it is still currently under study.

Methods: In this study, the -coumaryl alcohol analog (H) and the coniferyl alcohol analog (G) containing an alkyne group at the ortho position were synthesized and applied to lignification and .

Harnessing miRNA156: A molecular Toolkit for reshaping plant development and achieving ideal architecture.

Achieving ideal plant architecture is of utmost importance for plant improvement to meet the demands of ever-increasing population. The wish list of ideal plant architecture traits varies with respect to its utilization and environmental conditions. Late seed development in woody plants poses difficulties for their propagation, and an increase in regeneration capacity can overcome this problem.

Providing biological context for GWAS results using eQTL regulatory and co-expression networks in Populus.

Our study utilized genome-wide association studies (GWAS) to link nucleotide variants to traits in Populus trichocarpa, a species with rapid linkage disequilibrium decay. The aim was to overcome the challenge of interpreting statistical associations at individual loci without sufficient biological context, which often leads to reliance solely on gene annotations from unrelated model organisms. We employed an integrative approach that included GWAS targeting multiple traits using three individual techniques for lignocellulose phenotyping, expression quantitative trait loci (eQTL) analysis to construct transcriptional regulatory networks around each candidate locus and co-expression analysis to provide biological context for these networks, using lignocellulose biosynthesis in Populus trichocarpa as a case study.

Valorization of Lignocellulose with One-Step Acidified Monophasic Phenoxyethanol Fractionation.

Effective fractionation of lignocelluosic biomass and subsequent valorization of all three major components under mild conditions were achieved. Pretreatment with acidified monophasic phenoxyethanol (EPH) efficiently removed 92.6 % lignin and 80 % xylan from poplar at 110 °C in 60 min, yielding high-value EPH-xyloside, EPH-modified lignin (EPHL), and a solid residue nearly purely composed of carbohydrates.

A Multi-Streamline Approach for Upcycling PET into a Biodiesel and Asphalt Modifier.

The non-degradable nature of petroleum-based plastics and the dependence on petroleum-based products in daily life and production are dilemmas of human development today. We hereby developed a plastic waste upcycling process to address these challenges. A multi-stream fraction strategy was developed to process poly (ethylene terephthalate) (PET) plastics into soluble and insoluble fractions.

Machine and Deep Learning: Artificial Intelligence Application in Biotic and Abiotic Stress Management in Plants.

Biotic and abiotic stresses significantly affect plant fitness, resulting in a serious loss in food production. Biotic and abiotic stresses predominantly affect metabolite biosynthesis, gene and protein expression, and genome variations. However, light doses of stress result in the production of positive attributes in crops, like tolerance to stress and biosynthesis of metabolites, called hormesis.

Lignin - A green material for antibacterial application - A review.

Lignin's antibacterial properties have become increasingly relevant due to the rise of microbial infectious diseases and antibiotic resistance. Lignin is capable of interacting electrostatically with bacteria and contains polyphenols that cause damage to their cell walls. These features make lignin a desirable material to exhibit antibacterial behavior.

Atomistic Simulations of Polydisperse Lignin Melts Using Simple Polydisperse Residue Input Generator.

Understanding the physics of lignin will help rationalize its function in plant cell walls as well as aiding practical applications such as deriving biofuels and bioproducts. Here, we present SPRIG (Simple Polydisperse Residue Input Generator), a program for generating atomic-detail models of random polydisperse lignin copolymer melts i.e.

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin.

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.

Unleashing the capacity of Rhodococcus for converting lignin into lipids.

Bioconversion of bioresources/wastes (e.g., lignin, chemical pulping byproducts) represents a promising approach for developing a bioeconomy to help address growing energy and materials demands.

Lytic polysaccharide monooxygenase synergized with lignin-degrading enzymes for efficient lignin degradation.

Even though the discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally shifted our understanding of biomass degradation, most of the current studies focused on their roles in carbohydrate oxidation. However, no study demonstrated if LPMO could directly participate to the process of lignin degradation in lignin-degrading microbes. This study showed that LPMO could synergize with lignin-degrading enzymes for efficient lignin degradation in white-rot fungi.

Quantitative Low-Field F Nuclear Magnetic Resonance Analysis of Carbonyl Groups in Pyrolysis Oils.

Invited for this month's cover is the collaboration between Dr Rob Evans at Aston University, Birmingham, UK and Prof. Art Ragauskas at University of Tennessee, Knoxville and Oak Ridge National Laboratory, Oak Ridge, USA. The image illustrates that low-field, or benchtop, NMR spectrometers can be as effective as their higher-field counterparts in the accurate, quantitative analysis of bio-oils.

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass.

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. To address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.

Bioconversion of Homogeneous Linear C-Lignin to Polyhydroxyalkanoates.

The bioconversion of homogeneous linear catechyl lignin (C-lignin) to polyhydroxyalkanoates (PHA) was examined for the first time in this study. C-lignins from vanilla, euphorbia, and candlenut seed coats (denoted as C1, C2, and C3, respectively) varied in their molecular structures, which showed different molecular weight distributions, etherification degrees, and contents of hydroxyl groups. A notable amount of nonetherified catechol units existed within C1 and C2 lignins, and these catechol units were consumed during fermentation.

Lignin with controlled structural properties by N-heterocycle-based deep eutectic solvent extraction.

The complex and heterogeneous nature of the lignin macromolecule has presented a lasting barrier to its utilization. To achieve high lignin yield, the technical lignin extraction process usually severely modifies and condenses the native structure of lignin, which is a critical drawback for its utilization in conversion processes. In addition, there is no method capable of separating lignin from plant biomass with controlled structural properties.

Coupling hydropyrolysis and vapor-phase catalytic hydrotreatment to produce biomethane from pine sawdust.

This study investigated hydropyrolysis and subsequent vapor-phase hydrotreatment over a NiAlO catalyst to produce biomethane (CH) from pine sawdust. The non-catalytic pressurized hydropyrolysis generated tar, CO, and CO as the primary products. However, using a NiAlO catalyst in the second-stage reactor significantly increased the formation of CH and reduced CO and CO in gas products.

Variable lignin structure revealed in leaves.

Lignin has long been a trait of interest, especially in bioenergy feedstocks such as . While the stem lignin of is well studied, foliar lignin has received significantly less consideration. To this end, leaves from 11 field grown, natural variant genotypes were investigated by NMR, FTIR, and GC-MS.

Mitigation of Hepatotoxicity via Boosting Antioxidants and Reducing Oxidative Stress and Inflammation in Carbendazim-Treated Rats Using L. Extract.

Exposure to food contaminants continues to be a substantial source of human health risks all over the world, particularly in developing countries. Carbendazim (CBZ) is a chemical fungicide used to control the spread of various fungi and other pathogens in the agriculture and veterinary sectors. The hazardous effects of CBZ on human health occur due to the accumulation of its residues in agricultural food products.

Quantitative Low-Field F Nuclear Magnetic Resonance Analysis of Carbonyl Groups in Pyrolysis Oils.

Pyrolysis bio-oils, one of the products of lignocellulosic biomass pyrolysis, have the potential to be widely used as fuels. The chemical composition of bio-oils is very complicated as they contain hundreds, if not thousands, of different, mostly oxygen-containing, compounds with a wide distribution of physical properties, chemical structures, and concentrations. Detailed knowledge of bio-oil composition is crucial for optimizing both the pyrolysis processes and for any subsequent upgrading into a more viable fuel resource.