Self-Assembly of Cyclodextrins and Their Complexes in Aqueous Solutions.

Cyclodextrins (CDs) are enabling pharmaceutical excipients that can be found in numerous pharmaceutical products worldwide. Because of their favorable toxicologic profiles, CDs are often used in toxicologic and phase I assessments of new drug candidates. However, at relatively high concentrations, CDs can spontaneously self-assemble to form visible microparticles in aqueous mediums and formation of such visible particles may cause product rejections.

Freeze-drying of nanosuspensions, part 3: investigation of factors compromising storage stability of highly concentrated drug nanosuspensions.

On the basis of a previously developed formulation and process guideline for lyophilized, highly concentrated drug nanosuspensions for parenteral use, it was the purpose of this study to demonstrate that the original nanoparticle size distribution can be preserved over a minimum period of 3 months, even if aggressive primary drying conditions are used. Critical factors were evaluated that were originally believed to affect storage stability of freeze-dried drug nanoparticles. It was found that the nature and concentration of the steric stabilizer, such as Poloxamer 338 and Cremophor EL, are the most important factors for long-term stability of such formulations, independent of the used drug compound.

Freeze drying of nanosuspensions, 2: the role of the critical formulation temperature on stability of drug nanosuspensions and its practical implication on process design.

The present study investigates whether controlling the product temperature below the critical formulation temperature (CFT) during primary drying in a freeze drying cycle is a prerequisite for the stabilization of drug nanoparticles. For that purpose, the CFT of four drug nanosuspensions stabilized with different types (amorphous and crystalline) and concentrations of steric stabilizers and either of the disaccharides, trehalose and sucrose, was determined by differential scanning calorimetry and freeze-dry microscopy. Freeze-drying experiments were performed such that product temperatures during primary drying remained either below or well above the CFT of individual mixtures.

Freeze-drying of nanosuspensions, 1: freezing rate versus formulation design as critical factors to preserve the original particle size distribution.

It has been recently reported in the literature that using a fast freezing rate during freeze-drying of drug nanosuspensions is beneficial to preserve the original particle size distribution. All freezing rates studied were obtained by utilizing a custom-made apparatus and were then indirectly related to conventional vial freeze-drying. However, a standard freeze-dryer is only capable of achieving moderate freezing rates in the shelf fluid circulation system.

Monoglyceride-based self-assembling copolymers as carriers for poorly water-soluble drugs.

To develop self-assembling polymers forming polymeric micelles and increasing the solubility of poorly soluble drugs, amphiphilic polymers containing a hydrophilic PEG moiety and a hydrophobic moiety derived from monoglycerides and polyethers were designed. The biodegradable copolymers were obtained via a polycondensation reaction of polyethylene glycol (PEG), monooleylglyceride (MOG) and succinic anhydride (SA). Polymers with molecular weight below 10,000 g/mol containing a minimum of 40 mol% PEG and a maximum of 10 mol% MOG self-assembled spontaneously in aqueous media upon gentle mixing.

Spontaneously self-assembled micelles from poly(ethylene glycol)-b-poly(epsilon-caprolactone-co-trimethylene carbonate) for drug solubilization.

Di-block copolymers composed of polyethylene glycol (PEG) and a second block of (co)polyesters of epsilon-caprolactone (CL) and/or trimethylene carbonate (TMC) were synthesized and characterized. Tin octoate was used as catalyst and polymerization were completed over a period of 24 h with high conversion (> 95%). Self-assembling properties in water were evaluated.

Transport mechanisms of mmePEG750P(CL-co-TMC) polymeric micelles across the intestinal barrier.

Monomethylether poly(ethyleneglycol)(750)-poly(caprolactone-co-trimethylene carbonate) (mmePEG750)P(CL-co-TMC)) which spontaneously form micelles, can cross lipid bilayers via passive diffusion and demonstrate an oral bioavailability of 40% in rats. The aim of the current work was to study the transport mechanism(s) of drug-loaded mmePEG750P(CL-co-TMC) micelles across the intestinal barrier. The transport of radiolabelled polymer across Caco-2 cell monolayer was investigated by disrupting tight junctions and by inhibiting endocytosis.

Prediction of drug solubility in amphiphilic di-block copolymer micelles: the role of polymer-drug compatibility.

The goal of the current study was to assess the value of predictive computational approaches for estimating drug solubility in hydrated micelles formed from di-block copolymers of polyethylene glycol (PEG) and random copolyesters of epsilon-caprolactone (CL) and trimethylene carbonate (TMC) using drug-polymer compatibility as assessed through the Flory-Huggins interaction parameter (chi). In order to accomplish this, the compatibility of several well-known model drugs (associated with the four biopharmaceutics classification system (BCS) classes) was assessed with both segments of the amphiphilic di-block copolymer PEG-b-P(CL-co-TMC). Compatibilities were estimated based on the Hansen modification of the Hildebrand approach using Molecular Modeling Pro software.

Passive diffusion of polymeric surfactants across lipid bilayers.

Self-assembling polymeric surfactant, mmePEG(750)P(CL-co-TMC) [monomethylether poly(ethylene glycol)(750)-poly(caprolactone-co-trimethylene carbonate)], increases drug solubility and crosses an enterocyte monolayer both in vitro and in vivo. The aims of the present work were to investigate whether mmePEG(750)P(CL-co-TMC) polymers can diffuse passively through lipid bilayer using parallel artificial membrane permeability assay (PAMPA) and affect membrane properties using liposomes as model. The mmePEG(750)P(CL-co-TMC) polymer was able to cross by passive diffusion an enterocyte-mimicking membrane in PAMPA at concentration which did not perturb membrane integrity.

Characterization of self-assembling copolymers in aqueous solutions using Electron Paramagnetic Resonance and Fluorescence spectroscopy.

Electron Paramagnetic Resonance and fluorescence spectroscopy have been used to determine the micropolarity and microviscosity of self-assembling systems based on mmePEG-p(CL-co-TMC) having different PEG chain lengths and different CL/TMC ratios and PEG/MOG/SA (45/5/50) polymers with different PEG chain lengths. Four reporter probes have been used: two spin probes, 16-doxyl stearic acid and 5-doxylstearic acid, and two fluorescent probes, pyrene and 1,3-bis(1-pyrenyl) propane (P3P). We found that the micelles based on mmePEG-p(CL-co-TMC) polymers are of a biphasic nature.

Hot stage extrusion of p-amino salicylic acid with EC using CO2 as a temporary plasticizer.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of the thermally labile p-aminosalicylic acid (p-ASA) and ethylcellulose 20cps (EC 20cps) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer. The thermal stability of the p-ASA was investigated using DSC, TGA and HPLC. The compound decomposes completely upon melting.

Intestinal uptake and biodistribution of novel polymeric micelles after oral administration.

To determine the fate of polymeric micelles after oral administration, we investigated the possible transport of polymeric micelles across Caco-2 monolayers and their biodistribution in rats after per os administration of [14C]-labelled mmePEG750P(CL-co-TMC) micelles containing risperidone (BCS Class II drug). mmePEG750P(CL-co-TMC) was able to cross Caco-2 monolayer via a saturable transport mechanism. The oral bioavailability of the polymer was 40%.

Encapsulation of amphotericin B in poly(ethylene glycol)-block-poly(epsilon-caprolactone-co-trimethylenecarbonate) polymeric micelles.

The aim of this work was to evaluate the potential of self-assembling poly(ethyleneglycol)(750)-block-poly(epsilon-caprolactone-co-trimethylenecarbonate)(4500) 50/50 copolymers (PEG-p(CL-co-TMC)) to solubilize amphotericin B in polymeric micelles and to disaggregate the drug to the less toxic monomeric form. Amphotericin B was encapsulated in the micelles upon dilution of a mixture of the liquid polymer and the drug in water. Its solubility was increased by two orders of magnitude depending on polymer concentration.

The effect of pressurized carbon dioxide as a temporary plasticizer and foaming agent on the hot stage extrusion process and extrudate properties of solid dispersions of itraconazole with PVP-VA 64.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of itraconazole and polyvinylpyrrolidone-co-vinyl acetate 64 (PVP-VA 64) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer as well as to produce a foamed extrudate. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. The physicochemical characteristics of the extrudates with and without injection of carbon dioxide were evaluated with reference to the morphology of the solid dispersion and dissolution behaviour and particle properties.

Self-assembling PEG-p(CL-co-TMC) copolymers for oral delivery of poorly water-soluble drugs: a case study with risperidone.

Diblock PEG-p(CL-co-TMC) [methoxypoly(ethylene glycol)-poly(caprolactone/trimethylene carbonate)] copolymers form micelles spontaneously and significantly increase the solubility of poorly water-soluble drugs. The aim of this work was to assess these diblock copolymers as oral drug delivery systems in both in vitro and in vivo experiments using risperidone as a model drug. The permeation of risperidone through Caco-2 cell monolayers showed that the apparent permeation coefficient (Papp) was slightly reduced when risperidone was formulated with the copolymer.

Biodegradable self-assembling PEG-copolymer as vehicle for poorly water-soluble drugs.

Purpose: To develop self-assembling systems increasing the solubility of poorly water-soluble drugs.

Methods: Low molecular weight liquid biodegradable copolymers were synthesized by ring-opening polymerization using caprolactone (CAP) and trimethylenecarbonate (TMC) as monomers. Various initiators were evaluated.

The use of polymer-based electrospun nanofibers containing amorphous drug dispersions for the delivery of poorly water-soluble pharmaceuticals.

Electrostatic spinning was applied to the preparation of drug-laden nanofiber for potential use in oral and topical drug delivery. While this technique is in its infancy with regard to pharmaceutical applications, a number of recent publications suggest that it may be of high value in the formulation of poorly water-soluble drugs by combining nanotechnology and solid solution/dispersion methodologies. The purpose of this article is to describe some of these recently published applications.

The effect of surface coverage and conformation of poly(ethylene oxide) (PEO) chains of poloxamer 407 on the biological fate of model colloidal drug carriers.

Poloxamer 407 was adsorbed onto the surface of model colloidal drug carriers, polystyrene nanoparticles of 40, 70 and 137 nm in diameter, and the effect of the degree of surface coverage and the conformation of the poly(ethylene oxide) (PEO) chains on biological fate was studied. The relationship between the physicochemical and the biological properties of the nanoparticle systems was also investigated. The adsorbed layer of poloxamer 407 was characterised in terms of percentage surface coverage, thickness of the adsorbed layer and average surface area per PEO chain.

Development of systems for targeting the regional lymph nodes for diagnostic imaging: in vivo behaviour of colloidal PEG-coated magnetite nanospheres in the rat following interstitial administration.

Purpose: Nanoparticles can be utilised for targeting drugs to the regional lymph nodes or as diagnostic agents. The surface modification of magnetite nanospheres with poly(ethylene glycol) (PEG) has been assessed by in vitro characterisation and in vivo studies following subcutaneous administration to the rat.

Methods: Magnetite nanospheres were prepared with a grafted PEG layer using various PEG lengths from 350 to 1,000 Da.

Encapsulation of calcitonin in liposomes depends on the vesicle preparation method.

Calcitonin-loading was studied in liposomes composed of phosphatidylcholine, cholesterol and stearylamine in relation to the vesicle preparation method. Liposomes entrapping calcitonin were prepared by extrusion, sonication or from mixed micelles through the elimination of cholate by gel filtration. To understand the mode of calcitonin encapsulation in the vesicles, riboflavin was entrapped within the vesicles and taken as a simple model for the encapsulation of molecules in the aqueous phase.

Cholate-induced disruption of calcitonin-loaded liposomes: formation of trypsin-resistant lipid-calcitonin-cholate complexes.

Purpose: The work was performed to obtain a better understanding why the oral administration of calcitonin (CT)-loaded liposomes to rats results in a hypocalcemia, while liposomes are normally disrupted in the gastro-intestinal tract and cannot protect the hormone from enzymatic digestion.

Methods: In vitro comparisons between the stability of calcein and CT-loaded liposomes in the presence of cholate solutions led to an interpretation of the results observed. By means of gel filtration, turbidimetry, and fluorescence measurements, the interactions between CT and lipids were studied after sonicated liposomes had been broken down by cholate.

Calcitonin-loaded liposomes: stability under acidic conditions and bile salts-induced disruption resulting in calcitonin-phospholipid complex formation.

Calcitonin-loading in liposomes composed of phosphatidylcholine, cholesterol and stearylamine or dipalmitoyl phosphatidylglycerol was studied at low pH values and in the presence of bile salts to check whether liposomal entrapment could be a possible means of protecting the peptide against the aggressive conditions present in the gastrointestinal tract. The association of calcitonin with the lipidic vesicles was monitored using radioactive labelling of the peptide and gel-filtration separation of the free and liposome-associated fractions. The results show that for all phospholipid compositions tested, loading was preserved in light acidic or basic buffers, and that only a slight disruption was observed at pH 2.