Production of an eco-friendly concrete by including high-volume zeolitic supplementary cementitious materials and quicklime.

The production of ordinary Portland cement (OPC) is one of the main global causes of CO release to the atmosphere. However, its availability and unique characteristics as a binding material make it difficult to be substituted by eco-friendlier materials. However, OPC partial replacement with pozzolanic materials is one of the best solutions to this problem.

The Influence of Expanded Glass and Expanded Clay on Lightweight Aggregate Shotcrete Properties.

In the construction industry, the selection of sustainable materials leads to a movement towards more sustainable construction. In this study, lightweight aggregate shotcrete based on expanded glass (EG) and expanded clay (EC) is investigated. The goal of the study is to determine the influence of EG and EC inclusion on the properties of shotcrete.

Preparation of Sorbents Containing Straetlingite Phase from Zeolitic By-Product and Their Performance for Ammonium Ion Removal.

In this study, straetlingite-based sorbents were used for NH ion removal from a synthetic aqueous solution and from the wastewater of an open recirculation African catfish farming system. This study was performed using column experiments with four different filtration rates (2, 5, 10, and 15 mL/min). It was determined that breakthrough points and sorption capacity could be affected by several parameters such as flow rate and mineral composition of sorption materials.

The Using of Concrete Wash Water from Ready Mixed Concrete Plants in Cement Systems.

Concrete plants accumulate large amounts of concrete wash water. This water, which pH is highly alkaline, has a negative impact on the environment. Its reuse in fresh concrete slightly reduces its mechanical properties.

Conversion of silica by-product into zeolites by thermo-sonochemical treatment.

The fine powdered silica by-product of processing of aluminum fluoride (fertilizer plant, Lithuania) was used for zeolite synthesis as silica and aluminum source. The effect of sonication time and the time of hydrothermal synthesis on crystallinity of the synthesized zeolite were studied. This allowed the transformation of the by-product to the mixture of Na-P zeolite and Na-X zeolite.

Removal of ammonium ion from aqueous solutions by using unmodified and HO-modified zeolitic waste.

In the petroleum industry during a catalytic cracking process, the used zeolitic catalyst becomes waste. This article investigated the sorption capacities of ammonium ions from aqueous solutions onto the previously mentioned zeolitic waste by batch experiments. Three types of zeolitic waste were used: unmodified zeolitic waste with two different particle size distributions and HO-modified zeolitic waste.

Effects of ultrasonic treatment on zeolite NaA synthesized from by-product silica.

The synthesis of zeolite NaA from silica by-product was carried out in the presence of 20 kHz ultrasound at room temperature. Zeolites obtained in this type of synthesis were compared to zeolites obtained by performing conventional static syntheses under similar conditions. The sonication effects on zeolite NaA synthesis were characterized by phase identification, crystallinity etc.