Material flow and environmental performance of the source segregated biowaste composting system.

Life cycle assessment (LCA) is performed to investigate the environmental impacts of two alternative approaches in a biowaste management system. The system inventory is based on actual data and on-site sampling for two consecutive years at the mechanical and biological treatment (MBT) facility at the prefecture of Chania (Greece). The facility pertains as MBT for household waste and material recycling (MR) for the recyclable fractions in two different process lines.

Recent Biotechnology Advances in Bio-Conversion of Lignin to Lipids by Bacterial Cultures.

The complexity and recalcitrance of the lignin structure is a major barrier to its efficient utilization and commercial production of high-value products. In recent years, the "bio-funneling" transformation ability of microorganisms has provided a significant opportunity for lignin conversion and integrated biorefinery. Based on the chemical structure of lignin, this mini-review introduces the recent advances of lignin depolymerization by bacterial strains and the application of microbial lignin degradation in lipids production.

Catalysing electrowinning of copper from E-waste: A critical review.

Smart technologies and digitalisation have increased the consumption of scarce metals that threaten the sustainability of intricated industries. Additionally, the growing streams of waste electrical and electronic equipment (e-waste) are significant hazards to public health and the environment. Thus, there is an escalating need to recover metals from e-waste for sustainable management of metal resources.

Forecasting quantities of critical raw materials in obsolete feature and smart phones in Greece: A path to circular economy.

Mobile phones represent an ever-increasing waste stream due to the increasing ownership and short lifetime. In particular, smartphones are among the most valuable e-waste because of their extremely high content of numerous key metals, specifically in the printed circuit board and magnets. As feature and smart phones contain different key metals at different concentrations, it is important to distinguish between the two phone types to make reliable estimations.

High temperature slagging gasification of municipal solid waste with biomass charcoal as a greener auxiliary fuel.

During high temperature slagging gasification of municipal solid waste (MSW), coal coke is typically used as an auxiliary fuel to maintain the high temperature in the gasifier and convert ashes into slag. Herein, biomass charcoal was utilized as a greener and more sustainable auxiliary fuel to replace the coal coke during stable and continuous gasification of MSW. Several monitoring characteristics were assessed, like operating conditions of the gasifier, influence of local MSW properties generated in Singapore, environmental impacts, and main by-products (slag, fly ash and metals).

Technical and environmental assessment of laboratory scale approach for sustainable management of marine plastic litter.

Laboratory scale recycling of marine plastic litter consisting of polyethylene terephthalate (PET) bottle sorting, pyrolysis and chemical vapor deposition (CVD) was conducted to identify the technical and environmental implications of the technology when dealing with real waste streams. Collected seashore and underwater plastics (SP and UP, respectively) contained large quantities of PET bottles (33.2 wt% and 61.

Dynamic estimation of future obsolete laptop flows and embedded critical raw materials: The case study of Greece.

The coronavirus pandemic has turned school and university learning system from classroom-based to exclusively online all over the world. As this change is accompanied by a spike in demand of laptops, an excessive amount of obsolete devices will be witnessed in the near future. Laptops are the most valuable e-waste category containing a high content of numerous critical raw materials, thus their waste management is crucial.

Transformation behaviors and environmental risk assessment of heavy metals during resource recovery from Sedum plumbizincicola via hydrothermal liquefaction.

Environmentally sound disposal of hyperaccumulator harvests is of critical importance to industrialization of phytoremediation. Herein, transformation behaviors and environmental risk of heavy metals were comprehensively examined during subcritical hydrothermal liquefaction of Sedum plumbizincicola. It is concluded that low temperature liquefaction favored resource recovery of heavy oil and hydrochars in terms of higher energy density, improved carbon sequestration and less energy consumption.

Processing of flexible plastic packaging waste into pyrolysis oil and multi-walled carbon nanotubes for electrocatalytic oxygen reduction.

Flexible plastic packaging waste causes serious environmental issues due to challenges in recycling. This study investigated the conversion of flexible plastic packaging waste with 11.8 and 27.

Environmental impact assessment of converting flexible packaging plastic waste to pyrolysis oil and multi-walled carbon nanotubes.

A solution to low recycling rates of plastic waste is the conversion into multi-walled carbon nanotubes (MWCNTs) that have high value and can create additional revenue for plant operators. The purpose of this study was to perform a life cycle assessment (LCA) of an integrated system that involves flexible packaging plastic waste (FPPW) pyrolysis, oil upgrading, and MWCNTs production. The objectives were to determine the environmental impact of MWCNTs synthesis from non-condensable pyrolysis gases, and to assess the environmental impact of MWCNTs synthesis from different plastic fractions.

Insights into the speciation of heavy metals during pyrolysis of industrial sludge.

The purpose of this study was to determine the mechanisms in heavy metals immobilisation during pyrolysis of industrial sludge (IS). Pyrolysis was conducted in a fixed-bed unit at the temperature range between 400 and 800°C. Conventional and advanced analytical techniques were employed to assess the influencing parameters on the transformation of heavy metals during pyrolysis process.

Characteristics of incineration ash for sustainable treatment and reutilization.

Municipal solid waste incineration (MSWI) generates bottom ash, fly ash (FA), and air pollution control (APC) residues as by-products. FA and APC residues are considered hazardous due to the presence of soluble salts and a high concentration of heavy metals, and they should be appropriately treated before disposal. Physicochemical characterization using inductively coupled plasma mass spectroscopy (ICP-MS), X-ray diffraction (XRD), and X-ray fluorescence (XRF) have shown that FA and APC have potential for reuse after treatment as these contain CaO, SiO, and AlO.

A novel real-time monitoring and control system for waste-to-energy gasification process employing differential temperature profiling of a downdraft gasifier.

A novel, cost-effective and real-time process monitoring and control system was developed to maintain stable operation of waste-to-energy gasification process. It comprised a feedback loop control that utilized the differential temperatures of the oxidation and reduction zones in the gasifier to determine the regional heat-flow (endothermic or exothermic), to assess the availability of oxidizing agent (for instance, air or O2) at the char bed and to calculate the fuel feeding rate. Based on the correlations developed, the air-to-fuel ratio or the equivalence air ratio (ER) for air gasification could be instantaneously adjusted to maintain stable operation of the gasifier.

Pyrolysis derived char from municipal and industrial sludge: Impact of organic decomposition and inorganic accumulation on the fuel characteristics of char.

A comprehensive study was conducted to evaluate the fuel properties of the char produced from pyrolysis of municipal sludge (MS) and industrial sludge (IS) at different pyrolysis temperatures (500-700 °C). A detailed characterisation of the char was performed to investigate the impact of the decomposition and the accumulation of organic and inorganic compounds during pyrolysis on the fuel properties of the derived char. Increase in pyrolysis temperature increased the fuel ratios especially in the MS-derived char.

Evaluation of Lighting Systems, Carbon Sources, and Bacteria Cultures on Photofermentative Hydrogen Production.

Fluorescent and incandescent lighting systems were applied for batch photofermentative hydrogen production by four purple non-sulfur photosynthetic bacteria (PNSB). The hydrogen production efficiency of Rhodopseudomonas palustris, Rhodobacter sphaeroides, Rhodobacter capsulatus, and Rhodospirillum rubrum was evaluated using different carbon sources (acetate, butyrate, lactate, and malate). Incandescent light was found to be more effective for bacteria cell growth and hydrogen production.

High-quality fuel from food waste - investigation of a stepwise process from the perspective of technology development.

A stepwise process (SP) was developed for sustainable energy production from food waste (FW). The process comprised of hydrothermal treatment followed by oil upgrading. Synthetic food waste was primarily used as feedstock in the hydrothermal reactor under subcritical water conditions.

Determination of urine-derived odorous compounds in a source separation sanitation system.

Source separation sanitation systems have attracted more and more attention recently. However, separate urine collection and treatment could induce odor issues, especially in large scale application. In order to avoid such issues, it is necessary to monitor the odor related compounds that might be generated during urine storage.

Multiple geophysical surveys for old landfill monitoring in Singapore.

One-dimensional boring presents limitations on mapping the refuse profile in old landfills owning to waste heterogeneity. Electrical imaging (EI) and multiple-analysis of surface wave (MASW) were hereby deployed at an old dumping ground in Singapore to explore the subsurface in relation to geotechnical analysis. MASW estimated the refuse boundary with a higher precision as compared to EI, due to its endurance for moisture variation.

Optimization of micronutrient supplement for enhancing biogas production from food waste in two-phase thermophilic anaerobic digestion.

The aim of this study was to enhance the biogas productivity of two-phase thermophilic anaerobic digestion (AD) using food waste (FW) as the primary substrate. The influence of adding four trace metals (Ca, Mg, Co, and Ni) as micronutrient supplement in the methanogenic phase of the thermophilic system was investigated. Initially, Response Surface Methodology (RSM) was applied to determine the optimal concentration of micronutrients in batch experiments.

Insights for transformation of contaminants in leachate at a tropical landfill dominated by natural attenuation.

The purpose of this study was to track the long-term trends of contaminants distribution in the old landfill of Singapore through monitored natural attenuation and to explore the main parameters that rule such transition. Contaminants distribution, including dissolved organic matter (DOM), inorganic species, heavy metals, and organic compounds, was investigated via monitoring wells in the years 1997, 2004 and 2011. The data revealed that the distribution of contaminants possessed selective attention of spots associated with leachate movement.

Influence of temperature on carbon and nitrogen dynamics during in situ aeration of aged waste in simulated landfill bioreactors.

The effect of temperature on carbon and nitrogen compounds during in situ aeration of aged waste was investigated in lab-scale simulated landfill bioreactors at 35, 45 and 55 °C, respectively. The bioreactor operated at 55 °C presented the highest carbon mineralization rate in the initial stage, suggesting accelerated biodegradation rates under thermophilic conditions. The nitrogen speciation study indicated that organic nitrogen was the dominant species of total N in aerobic bioreactors due to ammonia removal.

Monitoring transitory profiles of leachate humic substances in landfill aeration reactors in mesophilic and thermophilic conditions.

The presence of humic substances (HS) in landfill leachate is of great interest because of their structural stability and potential toxicity. This study examined the effects of temperature and waste age on the transformation of HS during in situ aeration of bioreactor landfills. By establishing aerobic conditions, dissolved organic carbon (DOC) rapidly accumulated in the bioreactor leachate.

Mapping refuse profile in Singapore old dumping ground through electrical resistivity, S-wave velocity and geotechnical monitoring.

The purpose of this study was to track the refuse profile in Lorong Halus Dumping Ground, the largest landfill in Singapore, by electrical resistivity and surface wave velocity after 25 years of closure. Data were analyzed using an orthogonal set of plots by spreading 24 lines in two perpendicular geophone-orientation directions. Both geophysical techniques determined that refuse boundary depth was 13 ± 2 m.

Environmental life cycle assessment of different domestic wastewater streams: policy effectiveness in a tropical urban environment.

To enhance local water security, the Singapore government promotes two water conservation policies: the use of eco-friendly toilets to reduce yellow water (YW) disposal and the installation of water efficient devices to minimize gray water (GW) discharge. The proposed water conservation policies have different impacts on the environmental performance of local wastewater management. The main purpose of this study is to examine and compare the impacts of different domestic wastewater streams and the effectiveness of two water conservation policies by means of life cycle assessment (LCA).