Vitamin C-reduced graphene oxide improves the performance and stability of multimodal neural microelectrodes.

Nanocarbons are often employed as coatings for neural electrodes to enhance surface area. However, processing and integrating them into microfabrication flows requires complex and harmful chemical and heating conditions. This article presents a safe, scalable, cost-effective method to produce reduced graphene oxide (rGO) coatings using vitamin C (VC) as the reducing agent.

Gold nanostructures: synthesis, properties, and neurological applications.

Recent advances in technology are expected to increase our current understanding of neuroscience. Nanotechnology and nanomaterials can alter and control neural functionality in both and experimental setups. The intersection between neuroscience and nanoscience may generate long-term neural interfaces adapted at the molecular level.

MXene-infused bioelectronic interfaces for multiscale electrophysiology and stimulation.

Soft bioelectronic interfaces for mapping and modulating excitable networks at high resolution and at large scale can enable paradigm-shifting diagnostics, monitoring, and treatment strategies. Yet, current technologies largely rely on materials and fabrication schemes that are expensive, do not scale, and critically limit the maximum attainable resolution and coverage. Solution processing is a cost-effective manufacturing alternative, but biocompatible conductive inks matching the performance of conventional metals are lacking.

Time Evolution of the Skin-Electrode Interface Impedance under Different Skin Treatments.

A low and stable impedance at the skin-electrode interface is key to high-fidelity acquisition of biosignals, both acutely and in the long term. However, recording quality is highly variable due to the complex nature of human skin. Here, we present an experimental and modeling framework to investigate the interfacial impedance behavior, and describe how skin interventions affect its stability over time.

A gel-free TiCT-based electrode array for high-density, high-resolution surface electromyography.

Wearable sensors for surface electromyography (EMG) are composed of single- to few-channel large-area contacts, which exhibit high interfacial impedance and require conductive gels or adhesives to record high-fidelity signals. These devices are also limited in their ability to record activation across large muscle groups due to poor spatial coverage. To address these challenges, we have developed a novel high-density EMG array based on titanium carbide (TiCT) MXene encapsulated in parylene-C.

Gels, jets, mosquitoes, and magnets: a review of implantation strategies for soft neural probes.

Implantable neuroelectronic interfaces have enabled breakthrough advances in the clinical diagnosis and treatment of neurological disorders, as well as in fundamental studies of brain function, behavior, and disease. Intracranial electroencephalography (EEG) mapping with stereo-EEG (sEEG) depth electrodes is routinely adopted for precise epilepsy diagnostics and surgical treatment, while deep brain stimulation has become the standard of care for managing movement disorders. Intracortical microelectrode arrays for high-fidelity recordings of neural spiking activity have led to impressive demonstrations of the power of brain-machine interfaces for motor and sensory functional recovery.

Hybrid diamond/ carbon fiber microelectrodes enable multimodal electrical/chemical neural interfacing.

Implantable medical devices are now in regular use to treat or ameliorate medical conditions, including movement disorders, chronic pain, cardiac arrhythmias, and hearing or vision loss. Aside from offering alternatives to pharmaceuticals, one major advantage of device therapy is the potential to monitor treatment efficacy, disease progression, and perhaps begin to uncover elusive mechanisms of diseases pathology. In an ideal system, neural stimulation, neural recording, and electrochemical sensing would be conducted by the same electrode in the same anatomical region.

Improved visual acuity using a retinal implant and an optimized stimulation strategy.

Objective: Retinal prosthetic devices hold great promise for the treatment of retinal degenerative diseases such as retinitis pigmentosa and age-related macular degeneration. Through electrical stimulation of the surviving retinal neurons, these devices evoke visual signals that are then relayed to the brain. Currently, the visual prostheses used in clinical trials have few electrodes, thus limiting visual acuity.

In Vivo Impedance Characterization of Cortical Recording Electrodes Shows Dependence on Electrode Location and Size.

Objective: Neural prostheses are improving the quality of life for those suffering from neurological impairments. Electrocorticography electrodes located in subdural, epidural, and intravascular positions show promise as long-term neural prostheses. However, chronic implantation affects the electrochemical environments of these arrays.

Electrical receptive fields of retinal ganglion cells: Influence of presynaptic neurons.

Implantable retinal stimulators activate surviving neurons to restore a sense of vision in people who have lost their photoreceptors through degenerative diseases. Complex spatial and temporal interactions occur in the retina during multi-electrode stimulation. Due to these complexities, most existing implants activate only a few electrodes at a time, limiting the repertoire of available stimulation patterns.

Diamond Devices for High Acuity Prosthetic Vision.

Retinal implants restore a sense of vision, for a growing number of users worldwide. Nevertheless, visual acuities provided by the current generation of devices are low. The quantity of information transferable to the retina using existing implant technologies is limited, far below receptor cells' capabilities.

A Simple and Accurate Model to Predict Responses to Multi-electrode Stimulation in the Retina.

Implantable electrode arrays are widely used in therapeutic stimulation of the nervous system (e.g. cochlear, retinal, and cortical implants).

Direct fabrication of 3D graphene on nanoporous anodic alumina by plasma-enhanced chemical vapor deposition.

High surface area electrode materials are of interest for a wide range of potential applications such as super-capacitors and electrochemical cells. This paper describes a fabrication method of three-dimensional (3D) graphene conformally coated on nanoporous insulating substrate with uniform nanopore size. 3D graphene films were formed by controlled graphitization of diamond-like amorphous carbon precursor films, deposited by plasma-enhanced chemical vapour deposition (PECVD).

The effects of temperature changes on retinal ganglion cell responses to electrical stimulation.

Little is known about how the retina's response to electrical stimulation is modified by temperatures. In vitro experiments are often used to inform in vivo studies, hence it is important to understand what changes occur at physiological temperature. To investigate this, we recorded from eight RGCs in vitro at three temperatures; room temperature (24°C), 30°C and 34°C.

Diamond encapsulated photovoltaics for transdermal power delivery.

A safe, compact and robust means of wireless energy transfer across the skin barrier is a key requirement for implantable electronic devices. One possible approach is photovoltaic (PV) energy delivery using optical illumination at near infrared (NIR) wavelengths, to which the skin is highly transparent. In the work presented here, a subcutaneously implantable silicon PV cell, operated in conjunction with an external NIR laser diode, is developed as a power delivery system.

Development of a Magnetic Attachment Method for Bionic Eye Applications.

Successful visual prostheses require stable, long-term attachment. Epiretinal prostheses, in particular, require attachment methods to fix the prosthesis onto the retina. The most common method is fixation with a retinal tack; however, tacks cause retinal trauma, and surgical proficiency is important to ensure optimal placement of the prosthesis near the macula.

Hermetic diamond capsules for biomedical implants enabled by gold active braze alloys.

As the field of biomedical implants matures the functionality of implants is rapidly increasing. In the field of neural prostheses this is particularly apparent as researchers strive to build devices that interact with highly complex neural systems such as vision, hearing, touch and movement. A retinal implant, for example, is a highly complex device and the surgery, training and rehabilitation requirements involved in deploying such devices are extensive.

Ultrananocrystalline diamond-CMOS device integration route for high acuity retinal prostheses.

High density electrodes are a new frontier for biomedical implants. Increasing the density and the number of electrodes used for the stimulation of retinal ganglion cells is one possible strategy for enhancing the quality of vision experienced by patients using retinal prostheses. The present work presents an integration strategy for a diamond based, high density, stimulating electrode array with a purpose built application specific integrated circuit (ASIC).

Optimizing the electrical stimulation of retinal ganglion cells.

Epiretinal prostheses aim to restore visual perception in the blind through electrical stimulation of surviving retinal ganglion cells (RGCs). While the effects of several waveform parameters (e.g.

Optical coherence tomography-guided retinal prosthesis design: model of degenerated retinal curvature and thickness for patient-specific devices.

Retinitis pigmentosa affects over 1.5 million people worldwide and is a leading cause of vision loss and blindness. While retinal prostheses have shown some success in restoring basic levels of vision, only generic, "one-size-fits-all" devices are currently being implanted.

Assessing residual visual function in severe vision loss.

Purpose: Vision restoration is a fast-approaching reality for some people with profound vision loss. In order to reliably determine treatment efficacy, accurate assessment of baseline residual visual function is critical. The purpose of this study was to compare residual function as detected on Goldman visual field (GVF) and full-field ERG (ffERG), and correlate with the remaining photoreceptor layer as determined by spectral-domain optical coherence tomography (SD-OCT), in subjects with severe vision loss.

Modeling intrinsic electrophysiology of AII amacrine cells: preliminary results.

In patients who have lost their photoreceptors due to retinal degenerative diseases, it is possible to restore rudimentary vision by electrically stimulating surviving neurons. AII amacrine cells, which reside in the inner plexiform layer, split the signal from rod bipolar cells into ON and OFF cone pathways. As a result, it is of interest to develop a computational model to aid in the understanding of how these cells respond to the electrical stimulation delivered by a prosthetic implant.

Necrotising dermatitis in refractory acute myeloid leukaemia.

Severe cutaneous infections in leukaemic patients are difficult to treat and can rapidly become fatal. We report on a case of essential thrombocythemia evolved to a myelodysplastic syndrome and finally, to an overt myeloid leukaemia, refractory to chemotherapy. In the presence of a marked neutropenia, the patients developed a wide Staphylococcus epidermidis necrotising dermatitis.

Leukaemic pulmonary infiltrates in adult acute myeloid leukaemia: a high-resolution computerized tomography study.

Leukaemic infiltration of the lungs may occur in acute myeloid leukaemia (AML). Pulmonary infiltrates are usually microscopic and invariably associated with hyperleucocytosis. Four AML patients with respiratory symptoms and low leucocyte counts underwent standard chest radiography, bronchoscopy with bronchoalveolar lavage and high-resolution computerized tomography (HRCT) of the lungs.